Omron NYB - 3 Series, NYB - 4 Series, NYB - 1 Series, NYB - 0 Series, NYB - 2 Series Operating Manual
...
Industrial PC Platform
NY-series
Industrial PC
Operating Systems and Software Utilities Manual
NYB££NYB££-££1
NYB££-££2
NYB££-££3
NYB££-££4
NYP££-££0
NYP££-££1
NYP££-££2
NYP££-££3
NYP££-££4
££0
W616-E2-02
NOTE
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or other-
wise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice. Every precaution has been taken in the preparation
of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from the use of the information contained in this publica-
tion.
Trademarks
• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan
and other countries for OMRON factory automation products.
• Windows is a registered trademark of Microsoft Corporation in the USA and other countries.
• The SD and SDHC logos are trademarks of SD-3C, LLC.
• CFAST is a registered trademark of CompactFlash Association.
• Intel, the Intel Logo, Celeron and Intel Core are trademarks of Intel Corporation in the U.S. and/or
other countries.
Other company names and product names in this document are the trademarks or registered trade-
marks of their respective companies.
Copyrights
Microsoft product screen shots reprinted with permission from Microsoft Corporation.
Introduction
Thank you for purchasing the Industrial PC.
This manual contains information that is necessary to use the Industrial PC (hereafter also named as
IPC). Please read this manual and make sure you understand the functionality and performance of the
IPC before attempting to use it.
Keep this manual in a safe place where it will be available for reference during operation.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of software pro-
gramming (a software engineer or the equivalent).
• Personnel in charge of introducing Factory Automation systems.
• Personnel in charge of designing Factory Automation systems.
• Personnel in charge of software design for Factory Automation systems.
• Personnel in charge of installing and maintaining and programming Factory Automation systems.
• Personnel in charge of managing Factory Automation systems and facilities.
Introduction
Applicable Products
This manual covers following Industrial PC products:
Industrial Box PC
Industrial Panel PC
Additional Information
Refer to 1-4 Product Configuration on page 1-5 for configuration details.
Product Model
NYB££
NYP££
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1
Introduction
2
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Sections in this Manual
Operating Procedures
Specifications
Installation
Software
System Configurations
Overview
1
2
3
4
5
6
1
2
3
4
6
5
1
7
7
Appendices
Maintenance
A
A
Sections in this Manual
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
3
CONTENTS
CONTENTS
Introduction .............................................................................................................. 1
Intended Audience...........................................................................................................................................1
Applicable Products
Sections in this Manual ........................................................................................... 3
Manual Information.................................................................................................. 7
Page Structure.................................................................................................................................................7
Special Information .......................................................................................................................................... 8
Terms and Conditions Agreement.......................................................................... 9
Warranty and Limitations of Liability ................................................................................................................ 9
Application Considerations ............................................................................................................................10
Disclaimers ....................................................................................................................................................11
Safety Precautions................................................................................................. 12
.........................................................................................................................................1
Precautions for Safe Use ...................................................................................... 13
Precautions for Correct Use ................................................................................. 14
Regulations and Standards .................................................................................. 15
Conformance to EU Directives ......................................................................................................................15
Conformance to KC Certification ...................................................................................................................16
Conformance to UL and CSA Standards.......................................................................................................16
Software Licenses and Copyrights ................................................................................................................16
Related Manuals..................................................................................................... 17
Related Industrial PC Manuals ......................................................................................................................17
Industrial Monitor Manual ..............................................................................................................................17
Terminology and Abbreviations ........................................................................... 18
Industrial PC Platform ...................................................................................................................................18
Software......................................................................................................................................................... 18
Hardware ......................................................................................................................................................19
Revision History..................................................................................................... 20
Section 1 Overview
1-1 Intended Use .........................................................................................................................1-2
1-2 Software Features
1-3 ID Information Label ..............................................................................................................1-4
1-4 Product Configuration...........................................................................................................1-5
1-4-1 Product Configuration Box PC ....................................................................................................1-5
1-4-2 Product Configuration Panel PC .................................................................................................1-7
1-5 Overall Setup Procedure .......................................................................................................1-9
4
..................................................................................................................1-3
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Section 2 System Configurations
2-1 Configuration for NYB and NYP ...........................................................................................2-2
Section 3 Software
3-1 Windows Operating System .................................................................................................3-3
3-1-1 Determine Y
3-2 Overview IPC Support Software for Windows ....................................................................3-4
3-3 Industrial PC Support Utility ................................................................................................ 3-5
3-3-1 Industrial PC Support Utility Overview ........................................................................................3-6
3-3-2 Product Information Tab .............................................................................................................3-7
3-3-3 System Status Tab ......................................................................................................................3-8
3-3-4 Machine Controller Tabs .............................................................................................................3-9
3-3-5 Compatibility................................................................................................................................3-9
3-3-6 Installation ...................................................................................................................................3-9
3-3-7 Startup.........................................................................................................................................3-9
3-3-8 Logging .....................................................................................................................................3-10
3-4 Industrial Monitor Utility ..................................................................................................... 3-11
3-4-1 Industrial Monitor Utility Overview............................................................................................. 3-11
3-4-2 Compatibility..............................................................................................................................3-15
3-4-3 Installation .................................................................................................................................3-15
3-4-4 Startup.......................................................................................................................................3-15
3-4-5 Configuration.............................................................................................................................3-16
3-4-6 Messages..................................................................................................................................3-16
3-4-7 Logging .....................................................................................................................................3-16
3-5 Industrial Monitor Brightness Utility .................................................................................3-17
3-5-1 Industrial Monitor Brightness Utility ..........................................................................................3-17
3-5-2 Compatibility..............................................................................................................................3-17
3-5-3 Installation .................................................................................................................................3-18
3-5-4 Startup.......................................................................................................................................3-18
3-5-5 Configuration.............................................................................................................................3-18
3-5-6 Logging .....................................................................................................................................3-18
3-6 Rescue Disk Creator............................................................................................................3-19
3-6-1 Rescue Disk Creator Overview .................................................................................................3-19
3-6-2 Compatibility..............................................................................................................................3-20
3-6-3 Installation .................................................................................................................................3-20
3-6-4 Startup.......................................................................................................................................3-21
3-6-5 Messages..................................................................................................................................3-21
3-7 Industrial PC Tray Utility ....................................................................................................3-25
3-7-1 Industrial PC Tray Utility Overview............................................................................................3-25
3-7-2 Features ....................................................................................................................................3-25
3-7-3 Menu .........................................................................................................................................3-26
3-7-4 About the Industrial PC Tray Utility ...........................................................................................3-26
3-7-5 Status Indicators on Icons.........................................................................................................3-27
3-7-6 Compatibility..............................................................................................................................3-27
3-7-7 Installation .................................................................................................................................3-27
3-7-8 Startup.......................................................................................................................................3-28
3-8 Power Attendant Lite Utility ................................................................................................ 3-29
3-8-1 Power Attendant Lite Utility Overview .......................................................................................3-29
3-8-2 Features ....................................................................................................................................3-29
3-8-3 Compatibility..............................................................................................................................3-29
3-8-4 Installation .................................................................................................................................3-30
3-8-5 Configuration.............................................................................................................................3-30
3-9 Software for Developers......................................................................................................3-32
3-9-1 Overview IPC Developer Software for Windows.......................................................................3-32
3-9-2 Industrial PC System API .........................................................................................................3-33
3-9-3 Industrial Monitor API ...............................................................................................................3-34
our Version of the Windows Operating Systems .....................................................3-3
CONTENTS
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
5
CONTENTS
Section 4 Specifications
4-1 Software Specifications .......................................................................................................4-2
4-1-1 A
4-1-2 Supported Languages.................................................................................................................4-3
vailable Windows Operating Systems.......................................................................................4-2
Section 5 Installation
5-1 Install Software ......................................................................................................................5-2
5-1-1 Internet Browser
5-1-2 Firewall........................................................................................................................................5-3
5-1-3 Anti-virus Software ......................................................................................................................5-3
5-1-4 Drivers and Custom Software .....................................................................................................5-4
5-1-5 Activate Windows........................................................................................................................5-4
5-1-6 Customize Windows....................................................................................................................5-4
5-2 Install Support Software........................................................................................................5-5
5-2-1 Overview IPC Support Software for Installation ..........................................................................5-5
5-3 Create Backup and Repair Media ......................................................................................... 5-6
..........................................................................................................................5-2
Section 6 Operating Procedures
6-1 React to Product Messages .................................................................................................. 6-2
6-2 React to Windows Messages................................................................................................6-3
Section 7 Maintenance
7-1 Preventive Maintenance ........................................................................................................7-2
7-1-1 Preventive Maintenance Schedule
7-1-2 Keep Software Updated ..............................................................................................................7-2
7-1-3 Create Backup and Repair Data .................................................................................................7-3
7-1-4 Check the Storage Device Status .............................................................................................7-15
7-1-5 Check the Backup and Repair Media........................................................................................7-17
7-2 Corrective Maintenance ......................................................................................................7-19
7-2-1 Warning and Error Messages....................................................................................................7-19
7-2-2 Restore and Repair Data ..........................................................................................................7-20
7-2-3 Allocate a Drive in Windows......................................................................................................7-28
7-2-4 Windows Event Viewer..............................................................................................................7-29
7-2-5 Windows Low on Memory .........................................................................................................7-31
7-2-6 Windows Blue Screens .............................................................................................................7-32
7-2-7 Correct Display Functionality when Nothing is Displayed .........................................................7-32
7-2-8 Correct Touchscreen Functionality............................................................................................7-33
..............................................................................................7-2
Appendices
A-1 Customize Windows ............................................................................................................. A-2
A-1-1 Enhanced W
A-1-2 File-Based Write Filter................................................................................................................ A-3
A-1-3 Unified Write Filter...................................................................................................................... A-5
A-1-4 Trusted Platform Module............................................................................................................ A-6
Index
6
rite Filter................................................................................................................. A-2
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Manual Information
A
B
C
E
F
B
C
H
5 Installation
5 - 3
NY
-series User's Manual (W555)
5-1 Unpack
5
5-1-1 Unpack Procedure
G
5-1
Unpack
This section provides details on how to unpack the Industrial Panel PC.
5-1-1
Unpack Procedure
1 Check the package for damage.
If there is any visible damage:
• Take photos of the package and save them.
• Inform your supplier immediately.
2 Open the package.
Ensure not to damage the contents.
3 Ensure that all items are present.
Additional Information
Refer to 5-1-2 Items Supplied with the Product
for the items supplied.
This section provides information about this manual.
Page Structure
The following page structure is used in this manual.
Manual Information
Note: This illustration is provided as a sample. It will not literally appear in this manual.
Item Explanation Item Explanation
A Level 1 heading E Special Information
B Level 2 heading F Manual name
C Level 3 heading G Page tab with the number of the main section
D Step in a procedure H Page number
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
7
Manual Information
Special Information
Special information in this manual is classified as follows:
Precautions for Safe Use
Precautions on what to do and what not to do to ensure safe usage of the product.
Precautions for Correct Use
Precautions on what to do and what not to do to ensure proper operation and performance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Version Information
Information on differences in specifications and functionality between different versions.
8
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Terms and Conditions Agreement
Terms and Conditions Agreement
Warranty and Limitations of Liability
WARRANTY
• The warranty period for the Software is one year from the date of purchase, unless otherwise
specifically agreed.
• If the User discovers defect of the Software (substantial non-conformity with the manual), and return
it to OMRON within the above warranty period, OMRON will replace the Software without charge by
offering media or download from OMRON’s website. And if the User discovers defect of media
which is attributable to OMRON and return it to OMRON within the above warranty period, OMRON
will replace defective media without charge. If OMRON is unable to replace defective media or
correct the Software, the liability of OMRON and the User’s remedy shall be limited to the refund of
the license fee paid to OMRON for the Software.
LIMITATION OF LIABILITY
• THE ABOVE WARRANTY SHALL CONSTITUTE THE USER’S SOLE AND EXCLUSIVE
REMEDIES AGAINST OMRON AND THERE ARE NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTY OF MERCHANTABILITY OR
FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT, OMRON WILL BE LIABLE FOR ANY
LOST PROFITS OR OTHER INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF USE OF THE SOFTWARE.
• OMRON SHALL HAVE NO LIABILITY FOR DEFECT OF THE SOFTWARE BASED ON
MODIFICATION OR ALTERNATION TO THE SOFTWARE BY THE USER OR ANY THIRD PARTY.
OMRON SHALL NOT BE RESPONSIBLE AND/OR LIABLE FOR ANY LOSS, DAMAGE, OR
EXPENSES DIRECTLY OR INDIRECTLY RESULTING FROM THE INFECTION OF OMRON
PRODUCTS, ANY SOFTWARE INSTALLED THEREON OR ANY COMPUTER EQUIPMENT,
COMPUTER PROGRAMS, NETWORKS, DATABASES OR OTHER PROPRIETARY MATERIAL
CONNECTED THERETO BY DISTRIBUTED DENIAL OF SERVICE ATTACK, COMPUTER
VIRUSES, OTHER TECHNOLOGICALLY HARMFUL MATERIAL AND/OR UNAUTHORIZED
ACCESS.
• OMRON SHALL HAVE NO LIABILITY FOR SOFTWARE DEVELOPED BY THE USER OR ANY
THIRD PARTY BASED ON THE SOFTWARE OR ANY CONSEQUENCE THEREOF.
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
9
Terms and Conditions Agreement
Application Considerations
APPLICABLE CONDITIONS
A USER SHALL NOT USE THE SOFTWARE FOR ANY PURPOSE THAT IS NOT PROVIDED IN
THIS MANUAL OR IN A RELATED HARDW
Suitability of Use
Omron Companies shall not be responsible for conformity with any standards, codes or regulations
which apply to the combination of the Product in the Buyer’s application or use of the Product. At
Buyer’s request, Omron will provide applicable third party certification documents identifying ratings
and limitations of use which apply to the Product. This information by itself is not sufficient for a
complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness
of the particular Product with respect to Buyer
application responsibility in all cases.
ARE USER'S MANUAL.
’s application, product or system. Buyer shall take
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE
HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
Programmable Products
• Omron Companies shall not be responsible for the user’s programming of a programmable Product,
or any consequence thereof.
• Omron Companies shall not be responsible for the operation of the user accessible operating sys-
tem (e.g. Windows, Linux), or any consequence thereof.
10
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Disclaimers
Performance Data
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for
the user in determining suitability and does not constitute a warranty. It may represent the result of
Omron’
formance is subject to the Omron’s Warranty and Limitations of Liability.
s test conditions, and the user must correlate it to actual application requirements. Actual per-
Change in Software Specifications
The software specifications and accessories may be changed at any time based on improvements and
other reasons.
Terms and Conditions Agreement
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be accurate; how-
ever, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
11
Safety Precautions
Safety Precautions
For NYB£ and NYP£ refer to the following manuals:
• NY-series Industrial Box PC Hardware User
• NY-series Industrial Panel PC Hardware User’s Manual (Cat. No. W555)
’s Manual (Cat. No. W553)
12
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Precautions for Safe Use
For NYB£ and NYP£ refer to the following manuals:
• NY-series Industrial Box PC Hardware User
• NY-series Industrial Panel PC Hardware User’s Manual (Cat. No. W555)
’s Manual (Cat. No. W553)
Precautions for Safe Use
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
13
Precautions for Correct Use
Precautions for Correct Use
For NYB£ and NYP£ refer to the following manuals:
• NY-series Industrial Box PC Hardware User
• NY-series Industrial Panel PC Hardware User’s Manual (Cat. No. W555)
’s Manual (Cat. No. W553)
14
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Regulations and Standards
Conformance to EU Directives
The Industrial PC complies with EU Directives. To ensure that the machine or device in which the In-
dustrial PC is used complies with EU Directives, the following precautions must be observed:
• The Industrial PC must be installed within a control panel.
• The Industrial PC that complies with EU Directives also conforms to the Common Emission Stand-
ard. Radiated emission characteristics (10-m regulations) may vary depending on the configuration
of the control panel used, other devices connected to the control panel, wiring, and other conditions.
You must therefore confirm that the overall machine or equipment in which the Industrial PC is used
complies with EU Directives.
• This is a Class A product (for industrial environments). In a residential environment, it may cause
radio interference. If radio interference occurs, the user may be required to take appropriate meas-
ures.
Regulations and Standards
Applicable Directive
EMC Directive
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
15
Regulations and Standards
Conformance to KC Certification
When you use this product in South Korea, observe the following precautions.
This product meets the electromagnetic compatibility requirements for business use. There is a risk of
radio interference when this product is used in home.
Conformance to UL and CSA Standards
Some Industrial PC Platform products comply with UL and CSA standards. If you use a product that
complies with UL or CSA standards and must apply those standards to your machinery or devices,
refer to this manual. This manual provides the application conditions for complying with the standards.
If the product is used in a manner not specified in the Instruction Sheet or in the product manuals then
the protection provided by the equipment may be impaired.
Software Licenses and Copyrights
This product incorporates certain third party software. The license and copyright information associat-
ed with this software is available at http://www.fa.omron.co.jp/nj_info_e/.
16
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Related Manuals
The following manuals are related. Use these manuals for reference.
Related Industrial PC Manuals
This table contains the related manuals of Industrial PC products.
Related Manuals
Manual name
NY-series Industrial Box
PC Hardware
’
s Manual
User
(Cat. No.
W553)
NY-series Industrial Panel
PC Hardware
User’
s Manual
(Cat. No.
W555)
Cat.
No.
W553 NYB Learning all basic information about the
W555 NYP Learning all basic information about the
Model
num-
bers
Application Description
Industrial Box PC. This includes introductory information with features, hardware
overview, software overview, specifications, mounting, wiring, connecting, operating and maintaining the Industrial Box
PC.
Mainly hardware information is provided.
Industrial Panel PC. This includes introductory information with features, hardware overview, software overview, specifications, mounting, wiring, connecting, operating and maintaining the Industrial
Panel PC.
Mainly hardware information is provided.
An introduction to the Industrial
Box PC is provided along with
the following information:
• Overview
• Hardware
• Software
• Specifications
• Installation
• Operating Procedures
• Maintenance
An introduction to the Industrial
Panel PC is provided along with
the following information:
• Overview
• Hardware
• Software
• Specifications
• Installation
• Operating Procedures
• Maintenance
Industrial Monitor Manual
This table contains the related manual of the Industrial Monitor.
Manual
name
Industrial
Monitor
User’
s
Manual
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Cat.
No.
W554
Model numbers Application Description
• NYM12W-C1
££
• NYM15W-C1£
££
• NYM19W-C1£
££
Learning all basic information
£
about the Industrial Monitor
includes introductory information
with features, hardware overview,
specifications, mounting, wiring,
connecting, operating and maintaining the Industrial Monitor.
. This
An introduction to the Industrial
Monitor is provided along with
the following information:
• Overview
• Hardware
• Software
• Specifications
• Installation
• Operating Procedures
• Maintenance
17
Terminology and Abbreviations
Terminology and Abbreviations
Industrial PC Platform
Term / Abbreviation Description
Industrial PC Platform An integrated range of OMRON products designed for use in any industrial applica-
tion that will benefit from advanced PC technology
Industrial Monitor An industrial monitor with a touchscreen as the user interface designed to work in
industrial environments
Industrial Panel PC An industrial PC with an integrated touchscreen monitor designed to work in indus-
trial environments
Industrial Box PC A box-shaped industrial PC including an OS designed to work in industrial environ-
ments
IPC Industrial PC
Sysmac OMRON’s brand name of the product family for the industrial automation equip-
ment
Software
Term / Abbreviation Description
ACPI Advanced Configuration and Power Interface protocol for operating systems
API Application Programming Interface
BIOS Basic Input Output System. The first software run by a PC when powered on.
Developer Any person involved with the development of software
DST Daylight Saving Time
EWF Enhanced Write Filter
FBWF File-Based Write Filter
IIoT Industrial Internet of Things
Linux An open source Operating System
MBR Master Boot Record
Merge module A module providing a standard method by which developers deliver shared Win-
MSDN Microsoft Developer Network
NUI Natural User Interface
OS Operating System
PLC Programmable Logic Controller
RTOS Realtime Operating System
SDK Software Development Kit
TCP/IP Transmission Control Protocol / Internet Protocol, a core member of the Internet
TPM Trusted Platform Module
VxWorks A Realtime Operating System designed by Wind River
Windows An Operating System designed by Microsoft
dows installer components and setup logic to their applications
protocol suite
18
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Hardware
Term / Abbreviation Description
BMC Board Management Controller
CFast An SSD CFast storage device
CPU A Central Processing Unit is the hardware within a computer that executes the in-
DVI Digital Visual Interface
DVI-D A Digital Visual Interface with only Digital signals
DVI-I A Digital Visual Interface with Analog and Digital signals
Ethernet A network communication protocol used in TCP/IP network
HDD A Hard Disk Drive storage device
HMI A Human Machine Interface that facilitates machine operation and control
iMLC Industrial Multi-Level Cell type of SSD storage device
NYML NY Monitor Link interface with video signals and USB signals
PCIe The PCI Express is a high-speed computer bus standard called Peripheral Compo-
PoE Power over Ethernet
SATA The Serial AT Attachment is a serial bus interface primarily used with mass storage
SLC Single-Level Cell type of SSD storage device
SO-DIMM Small Outline Dual Inline Memory Module
SSD A Solid State Drive storage device
USB Universal Serial Bus
Terminology and Abbreviations
structions of a computer program
nent Interconnect Express
devices such as hard disk drives
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
19
W616-E2-02
Cat. No.
Revision code
Revision History
Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
Revision code Date Revised content
02 July 2019 Updated Conformance to KC certification
01 May 2019
• First release of this software manual for Industrial PCs
NY
• All hardware information for the Box PC is available in
trial Box PC Hardware User’s Manual (Cat. No. W553)
• All hardware information for the Panel PC is available in NY-series In-
dustrial Panel PC Hardware User’s Manual (Cat. No. W555).
-series Indus-
20
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Overview
This section provides general information about the Industrial PC.
1
1
1-1 Intended Use
1-2 Software Features ..........................................................................................1-3
1-3 ID Information Label....................................................................................... 1-4
1-4 Product Configuration ................................................................................... 1-5
1-4-1 Product Configuration Box PC........................................................................ 1-5
1-4-2 Product Configuration Panel PC..................................................................... 1-7
1-5 Overall Setup Procedure ...............................................................................1-9
.................................................................................................. 1-2
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1-1
1 Overview
1-1
Intended Use
The Industrial PC is intended to be used in factory automation environments. This Industrial PC can
be configured with Windows, Linux or a realtime operating system (RTOS). Software utilties extend
the functionality and support the functional integration in custom software. It can be used with third
party software to serve as a powerful PC platform.
A user can access the Industrial PC for control, configuration and supervisory operations.
The Industrial PC can easily be integrated in manufacturing innovations like big data, NUI and IIoT.
The Industrial PC has a compact design that offers flexibility, expandability and easy maintenance for
applications in factory automation environments.
1-2
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1 Overview
1-2 Software Features
1-2
Software Features
The Industrial PC provides the following software features:
• Operating Systems
The system can be delivered with and without an operating system.
• Software Utilities
A range of software utilities extends the functionality of the Industrial PC.
There are software utilities that provide:
• functional support like brightness adjustments.
• operator support like messages for the operator.
• technical support like status details for diagnosing and resolving problems.
• APIs for developers
Several APIs allow software developers to implement functionality of the Industrial PC in a custom
program.
1
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1-3
1 Overview
1-3
ID Information Label
The ID information label contains the product configuration and other details on the specific configura-
tion of your Industrial PC.
For NYB£ and NYP£ refer to the following manuals:
• NY-series Industrial Box PC Hardware User’s Manual (Cat. No. W553)
• NY-series Industrial Panel PC Hardware User’s Manual (Cat. No. W555)
1-4
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
N Y B
1 2
3 4 5 6 7
1 Overview
1-4 Product Configuration
1-4
1-4-1
Product Configuration
This section provides an overview of the product configurations available for the Industrial PCs.
The product configuration is visible in the model-ID that is mentioned on the ID information label of the
Industrial PC.
Refer to 1-4-1 Product Configuration Box PC on page 1-5 for Industrial Box PC details.
Refer to 1-4-2 Product Configuration Panel PC on page 1-7 for Industrial Panel PC details.
Product Configuration Box PC
This section provides an overview of the product configurations available for the Industrial Box PC.
The product configuration is visible in the model-ID that is mentioned on the ID information label of the
product.
The structure of the model-ID is: NYB££-£££££.
Each item in the model-ID has a specific meaning.
1
1-4-1 Product Configuration Box PC
Item Description Option / Description
1 Series name NYB: NY- series Industrial Box PC
2 Processor
3 Main memory 1: 2 GB, non-ECC
4 Expansion slots 0: None
5 Operating system 0: No Operating System
1C: Intel® Celeron® 2980U, 4th generation CPU
1E: Intel® Xeon® E3-1515M v5
6th generation CPU with active cooling
17: Intel®
2A: Intel® Atom® x5-E3940
2C: Intel® Celeron® 3965U, 7th generation CPU
25: Intel® Core™ i5-4300U, 4th generation CPU
35: Intel® Core™ i5-7300U, 7th generation CPU
2: 4 GB, non-ECC
3: 8 GB, non-ECC
4: 16 GB, non-ECC
5: 32 GB, non-ECC
C: 8 GB, ECC
D: 16 GB, ECC
1: 1 PCIe slot
1: Windows Embedded Standard 7 - 32 bit
2: Windows Embedded Standard 7 - 64 bit
3: Windows 10 IoT Enterprise 2016 L
4: Windows 10 IoT Enterprise 2019 L
Core™ i7-4700EQ,
4th generation CPU with active cooling
TSB - 64 bit
TSC - 64 bit
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1-5
1 Overview
6 Storage 5: 64 GB, CFast iMLC
7 Optional interface 0: None
Item Description Option / Description
6: 128 GB, CFast iMLC
7: 256 GB, CFast iMLC
8: 32 GB, SSD SLC
9: 64 GB, SSD SLC
C: 320 GB, HDD
D: 500 GB, HDD
E: 1 TB, HDD
K: 128 GB, SSD iMLC
M: 500 GB, SSD iMLC
1: RS-232C
2: DVI-D
6: NY Monitor Link
9: Gb Ethernet
1-6
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
N Y P
1 2
3 4 5 6 7 8 9
10 11 12 13 14
1 Overview
1-4 Product Configuration
1-4-2
Product Configuration Panel PC
This section provides an overview of the product configurations available for the Industrial Panel PC.
The product configuration is visible in the model-ID that is mentioned on the ID information label of the
IPC.
The structure of the model-ID is: NYP££-£££££-££££££££.
Each item in the model-ID has a specific meaning.
Item Description Option / Description
1 Series name NYP: NY- series Industrial Panel PC
2 Processor
3 Main memory 1: 2 GB, non-ECC
4 Expansion slots 0: None
5 Operating system 0: No Operating System
6 Storage 5: 64 GB, CFast iMLC
7 Optional interface 0: None
1C: Intel® Celeron® 2980U, 4th generation CPU
17: Intel® Core™ i7-4700EQ,
4th generation CPU with active cooling
2A: Intel® Atom® x5-E3940
2C: Intel® Celeron®
25: Intel® Core™ i5-4300U, 4th generation CPU
35: Intel® Core™ i5-7300U, 7th generation CPU
2: 4 GB, non-ECC
3: 8 GB, non-ECC
4: 16 GB, non-ECC
5: 32 GB, non-ECC
C: 8 GB, ECC
D: 16 GB, ECC
1: 1 PCIe slot
1: Windows Embedded Standard 7 - 32 bit
2: Windows Embedded Standard 7 - 64 bit
3: Windows 10 IoT Enterprise 2016 L
4: Windows 10 IoT Enterprise 2019 L
6: 128 GB, CFast iMLC
7: 256 GB, CFast iMLC
8: 32 GB, SSD SLC
9: 64 GB, SSD SLC
C: 320 GB, HDD
D: 500 GB, HDD
E: 1 TB, HDD
K: 128 GB, SSD iMLC
M: 500 GB, SSD iMLC
1: RS-232C
2: DVI-D
6: NY Monitor Link
9: Gb Ethernet
3965U, 7th generation CPU
TSB - 64 bit
TSC - 64 bit
1
1-4-2 Product Configuration Panel PC
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1-7
1 Overview
8 Display size
9 Display ratio W: Wide
10 Touchscreen C: Projected Capacitive Touch type
11 Frame type 1: Panel mounted
12 Material finish 0: Aluminum, painted black
13 Built-in options 0: None
14 Logo 0: OMRON
Item Description Option / Description
12: 12.1 inch model, 1280 x 800 pixels, 24 bit full color
(diagonal)
15: 15.4 inch model, 1280 x 800 pixels, 24 bit full color
19: 18.5 inch model, 1920 x 1080 pixels, 24 bit full color
1: Aluminum, Nickel plated
6: NY Monitor Link
2: Customization
1-8
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
Loading...