Omron NX701-1720, NX701-1620, NX102-12, NX102-10, NX102-11 User Manual

...

Machine Automation Controller

NX-series

CPU Unit User's Manual

FINS Function

NX701-1720 NX701-1620 NX102-12££ NX102-1 NX102-10££ NX102-90££

1££

W596-E1-01

NOTE

transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or

otherwise, without the prior written permission of OMRON.

(2) No patent liability is assumed with respect to the use of the information contained herein.

Moreover, because OMRON is constantly striving to improve its high-quality products, the infor-

mation contained in this manual is subject to change without notice.

(3)

Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON as-

sumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained

in this publication.

Trademarks

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan

and other countries for OMRON factory automation products.

• Microsoft, Windows, Windows Vista, Excel, and V

trademarks of Microsoft Corporation in the United States and other countries.

• EtherCAT

GmbH, Germany.

is registered trademark and patented technology, licensed by Beckhoff Automation

isual Basic are either registered trademarks or

• ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.

• The SD and SDHC logos are trademarks of SD-3C, LLC.

Other company names and product names in this document are the trademarks or registered trade-

marks of their respective companies.

Copyrights

• Microsoft product screen shots reprinted with permission from Microsoft Corporation.

• This product incorporates certain third party software. The license and copyright information associ-

ated with this software is available at http://www

.fa.omron.co.jp/nj_info_e/.

Introduction

Thank you for purchasing an NX-series CPU Unit.

This manual contains information that is necessary to use the NX-series CPU Unit. Please read this

manual and make sure you understand the functionality and performance of the NX-series CPU Unit

before you attempt to use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and maintaining FA systems.

• Personnel in charge of managing FA systems and facilities.

For programming, this manual is intended for personnel who understand the programming language

specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Introduction

Applicable Products

This manual covers the following products.

NX-series CPU Unit

• NX701-1720

• NX701-1620

• NX102-12££

• NX102-11££

• NX102-10££

• NX102-90££

Part of the specifications and restrictions for the CPU Units are given in other manuals. Refer to Rele-

vant Manuals on page 2 and Related Manuals on page 19.

NX-series CPU Unit FINS Function User's Manual (W596)

Relevant Manuals

The following table provides the relevant manuals for the NX-series CPU Units. Read all of the man-

uals that are relevant to your system configuration and application before you use the NX-series CPU

Unit.

Most operations are performed from the Sysmac Studio Automation Software. For details about the

Sysmac Studio, refer to Sysmac Studio Version 1 Operation Manual (Cat. No. W504).

NX-series CPU Unit

Hardware User’s Manual

Purpose of use

Basic information

NX-series NX102 CPU Unit

Hardware User’

s Manual

NJ/NX-series CPU Unit

Software User’

Instructions Reference Manual

s Manual

NJ/NX-series

NJ/NX-series CPU Unit

Motion Control User’

Motion Control Instructions Reference Manual

s Manual

Manual

NJ/NX-series

NJ/NX-series CPU Unit

Built-in EtherCA

Built-in EtherNet/IP Port User’

T Port User´s Manual

NJ/NX-series CPU Unit

OPC UA User's Manual

NJ/NX-series CPU Unit

NX-series CPU Unit

FINS Function User's Manual

User's Manual

NJ/NX-series Database Connection CPU Units

NJ/NX-series

T roubleshooting Manual

Introduction to NX701 Controller

Introduction to NX102 Controller

Setting devices and hardware

Using motion control

Using EtherCAT

Using EtherNet/IP

Software settings

Using motion control

Using EtherCAT

Using EtherNet/IP

Using OPC UA

Using FINS

Using the database connection service

Writing the user program

Using motion control

Using EtherCAT

Using EtherNet/IP

Using OPC UA

Using FINS

Using the database connection service

Programming error processing

¡ ¡

s Manual

¡ ¡

NX-series CPU Unit FINS Function User's Manual (W596)

Basic information

NX-series CPU Unit

Hardware User’s Manual

NX-series NX102 CPU Unit

Hardware User’

s Manual

NJ/NX-series CPU Unit

Software User’

s Manual

NJ/NX-series

Instructions Reference Manual

NJ/NX-series CPU Unit

Motion Control User’

Relevant Manuals

Manual

NJ/NX-series

Motion Control Instructions Reference Manual

NJ/NX-series CPU Unit

Built-in EtherCAT Port User´s Manual

NJ/NX-series CPU Unit

Built-in EtherNet/IP Port User’

NJ/NX-series CPU Unit

OPC UA User's Manual

NX-series CPU Unit

FINS Function User's Manual

NJ/NX-series Database Connection CPU Units

User's Manual

T roubleshooting Manual

NJ/NX-series

Purpose of use

Testing operation and debugging

Using motion control

Using EtherCAT

Using EtherNet/IP

Using OPC UA

Using FINS

Using the database connection service

Learning about error management functions

and corrections of problems

Maintenance

Using motion control

Using EtherCAT

Using EtherNet/IP

*1. Refer to NJ/NX-series Troubleshooting Manual (Cat. No. W503) for the error management concepts and an overview of the error

items. However, refer to the manuals that are indicated with triangles(r) for details on errors corresponding to the products with the manuals that are indicated with triangles(r).

¡ ¡

s Manual

r r r ¡

NX-series CPU Unit FINS Function User's Manual (W596)

Terms and Conditions Agreement

Warranty, Limitations of Liability

Warranties

Exclusive Warranty



Omron’s exclusive warranty is that the Products will be free from defects in materials and work-

manship for a period of twelve months from the date of sale by Omron (or such other period ex-

pressed in writing by Omron). Omron disclaims all other warranties, express or implied.

Limitations



OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF

THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based

on infringement by the Products or otherwise of any intellectual property right.

Buyer Remedy



Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally

shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-

plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal

to the purchase price of the non-complying Product; provided that in no event shall Omron be re-

sponsible for warranty, repair, indemnity or any other claims or expenses regarding the Products

unless Omron’s analysis confirms that the Products were properly handled, stored, installed and

maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return

of any Products by Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the use of Products in

combination with any electrical or electronic components, circuits, system assemblies or any other

materials or substances or environments. Any advice, recommendations or information given orally

or in writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

NX-series CPU Unit FINS Function User's Manual (W596)

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on

which liability is asserted.

, NEGLIGENCE OR STRICT LIABILITY.

Application Considerations

Suitability of Use

Omron Companies shall not be responsible for conformity with any standards, codes or regulations

which apply to the combination of the Product in the Buyer’

er’s request, Omron will provide applicable third party certification documents identifying ratings and

limitations of use which apply to the Product. This information by itself is not sufficient for a complete

determination of the suitability of the Product in combination with the end product, machine, system, or

other application or use. Buyer shall be solely responsible for determining appropriateness of the par-

ticular Product with respect to Buyer’s application, product or system. Buyer shall take application re-

sponsibility in all cases.

Terms and Conditions Agreement

s application or use of the Product. At Buy-

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR

PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE

HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS

PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIP-

MENT OR SYSTEM.

Programmable Products

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or

any consequence thereof.

Disclaimers

Performance Data

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for

the user in determining suitability and does not constitute a warranty. It may represent the result of

Omron’

formance is subject to the Omron’s Warranty and Limitations of Liability.

s test conditions, and the user must correlate it to actual application requirements. Actual per-

Change in Specifications

Product specifications and accessories may be changed at any time based on improvements and oth-

er reasons. It is our practice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifications of the Product may

NX-series CPU Unit FINS Function User's Manual (W596)

Terms and Conditions Agreement

be changed without any notice. When in doubt, special part numbers may be assigned to fix or estab-

lish key specifications for your application. Please consult with your Omron’s representative at any

time to confirm actual specifications of purchased Product.

Errors and Omissions

Information presented by Omron Companies has been checked and is believed to be accurate; how-

ever, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

NX-series CPU Unit FINS Function User's Manual (W596)

Manual Structure

4-9

4 Installation and Wir

ing

NJ-series CPU Unit Hardware User’s Manual (W500)

gnitn

3-4

rel

noC

4-3 Mounting Units

The Units that make up an NJ-series Controller can be connected simply by pressing the Units together and locking the sliders by moving them toward the back of the Units. The End Cover is connected in the same way to the Unit on the far right side of the Controller.

1 Join the Units so that the connectors fit exactly.

2 The yellow sliders at the top and bottom of each Unit lock the Units together. Move the sliders

toward the back of the Units as shown below until they click into place.

Precautions for Correct UsePrecautions for Correct Use

4-3-1 Connecting Controller Components

Connector

Hook

Hook holes

Slider

Lock

Release

Move the sliders toward the back until they lock into place.

Level 1 heading Level 2 heading Level 3 heading

Level 2 heading

A step in a procedure

Manual name

Special information

Level 3 heading

Page tab

Gives the current headings.

Indicates a procedure.

Icons indicate precautions, additional information, or reference information.

Gives the number of the main section.

This illustration is provided only as a sample. It may not literally appear in this manual.

The sliders on the tops and bottoms of the Power Supply Unit, C

PU Unit, I/O Units, Special I/O Units, and CPU Bus Units must be completely locked (until they click into place) after connecting the adjacent Unit connectors.

Page Structure

The following page structure is used in this manual.

Manual Structure

NX-series CPU Unit FINS Function User's Manual (W596)

Manual Structure

Special Information

Special information in this manual is classified as follows:

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Version Information

Information on dif

and for dif

ferent versions of the Sysmac Studio is given.

ferences in specifications and functionality for Controller with different unit versions

Precaution on Terminology

In this manual, "download" refers to transferring data from the Sysmac Studio to the physical Control-

ler and "upload"

For the Sysmac Studio, "synchronization"

"synchronize" means to automatically compare the data for the Sysmac Studio on the computer with

the data in the physical Controller and transfer the data in the direction that is specified by the user.

refers to transferring data from the physical Controller to the Sysmac Studio.

is used to both "upload" and "download" data. Here,

NX-series CPU Unit FINS Function User's Manual (W596)

Introduction .............................................................................................................. 1

Intended Audience...........................................................................................................................................1

Applicable Products

Relevant Manuals..................................................................................................... 2

Terms and Conditions Agreement.......................................................................... 4

Warranty, Limitations of Liability ......................................................................................................................4

Application Considerations ..............................................................................................................................5

Disclaimers ......................................................................................................................................................5

Manual Structure...................................................................................................... 7

Page Structure.................................................................................................................................................7

Special Information .......................................................................................................................................... 8

Precaution on Terminology .............................................................................................................................. 8

CONTENTS

.........................................................................................................................................1

Safety Precautions................................................................................................. 11

Precautions for Safe Use ...................................................................................... 12

Precautions for Correct Use ................................................................................. 13

Regulations and Standards .................................................................................. 14

Versions.................................................................................................................. 15

Checking Versions.........................................................................................................................................15

Unit Versions of CPU Units and Sysmac Studio Versions.............................................................................18

Related Manuals..................................................................................................... 19

Revision History..................................................................................................... 20

Sections in this Manual ......................................................................................... 21

Section 1 FINS

1-1 Overview of FINS .................................................................................................................1 - 2

1-1-1 Server Function of FINS

1-1-2 Client Function of FINS .............................................................................................................1 - 2

1-2 Applicable CPU Units ..........................................................................................................1 - 3

1-3 System Configuration..........................................................................................................1 - 4

1-4 Relationship Between FINS Types and Units....................................................................1 - 5

1-5 Memory Used for CJ-series Units ......................................................................................1 - 6

1-5-1 Setting for the Memory Used for CJ-series Units ......................................................................1 - 6

1-5-2 Compatible Memory for CJ-series Units ...................................................................................1 - 6

............................................................................................................1 - 2

Section 2 Server Function

2-1 Overview of Server Function ..............................................................................................2 - 2

NX-series CPU Unit FINS Function User's Manual (W596)

CONTENTS

2-2 FINS Commands Supported by NX-series CPU Units......................................................2 - 3

2-3 Setting of FINS Node Address of Built-in EtherNet/IP Port

2-4 FINS Routing Table Setting.................................................................................................2 - 7

2-5 FINS Write Protection Function..........................................................................................2 - 8

2-6 FINS Command Execution Condition ................................................................................2 - 9

Section 3 Client Function

Overview of Client Function..........................................................................................................3 - 2

FINS Communications Instructions .............................................................................................3 - 3

Send

...........................................................................................................................................................3 - 4

Rcv..............................................................................................................................................................3 - 8

SendCmd..................................................................................................................................................3 - 14

Section 4 Troubleshooting

.............................................2 - 5

4-1 Troubleshooting...................................................................................................................4 - 2

Appendices

A-1 Difference Between CS/CJ-series and NX-series in FINS Routing ................................ A - 2

A-1-1 Communication When 0 Is Specified for the Destination Network Address............................. A - 2

A-1-2 Operation of Routing Table during Clear All Memory operation............................................... A - 4

Index

NX-series CPU Unit FINS Function User's Manual (W596)

Safety Precautions

Refer to the following manuals for safety precautions.

• NX-series CPU Unit Hardware User's Manual (Cat. No. W535)

• NX-series NX102 CPU Unit Hardware User's Manual (Cat. No. W593)

Safety Precautions

NX-series CPU Unit FINS Function User's Manual (W596)

Precautions for Safe Use

Refer to the following manuals for precautions for safe use.

• NX-series CPU Unit Hardware User's Manual (Cat. No. W535)

• NX-series NX102 CPU Unit Hardware User's Manual (Cat. No. W593)

NX-series CPU Unit FINS Function User's Manual (W596)

Precautions for Correct Use

Refer to the following manuals for precautions for correct use.

• NX-series CPU Unit Hardware User's Manual (Cat. No. W535)

• NX-series NX102 CPU Unit Hardware User's Manual (Cat. No. W593)

Precautions for Correct Use

NX-series CPU Unit FINS Function User's Manual (W596)

Regulations and Standards

Refer to the following manuals for regulations and standards.

• NX-series CPU Unit Hardware User's Manual (Cat. No. W535)

• NX-series NX102 CPU Unit Hardware User's Manual (Cat. No. W593)

NX-series CPU Unit FINS Function User's Manual (W596)

Versions

ID information indication

Lot number Serial number Unit version

MAC address Hardware revision

LOT No. DDMYY£ xxxx Ver.1.

££

PORT1 : ££££££££££££ HW Rev. £ PORT2 : ££££££££££££

Hardware revisions and unit versions are used to manage the hardware and software in NX-series

Units and EtherCAT slaves. The hardware revision or unit version is updated each time there is a

change in hardware or software specifications. Even when two Units or EtherCAT slaves have the

same model number, they will have functional or performance differences if they have different hard-

ware revisions or unit versions.

Checking Versions

You can check versions on the ID information indications or with the Sysmac Studio.

Checking Unit Versions on ID Information Indications

Versions

The unit version is given on the ID information indication on the side of the product.

For NX701



The ID information on an NX-series NX701-££££ CPU Unit is shown below.

Note The hardware revision is not displayed for the Unit whose hardware revision is blank.

NX-series CPU Unit FINS Function User's Manual (W596)

ID Information Indication

Unit version Hardware revision

Lot number

Serial number

MAC address

LOT No. DDMYY£ xxxx PORT1

££££££££££££

PORT2

££££££££££££

Ver.£.££ HW Rev.£

Versions

For NX102



The ID information on an NX-series NX102-££££ CPU Unit is shown below.

Note The hardware revision is not displayed for the Unit whose hardware revision is blank.

Checking Unit Versions with the Sysmac Studio

You can use the Sysmac Studio to check unit versions. The procedure is different for Units and for

EtherCA



T slaves.

Checking the Unit V

You can use the Production Information while the Sysmac Studio is online to check the unit version

of a Unit. You can do this for the following Units.

Model Unit for which unit version can be checked

NX701-££££

NX102-££££

NX1P2-££££

ersion of an NX-series CPU Unit

CPU Unit

CPU Unit and NX Unit on CPU Rack

CPU Unit, NX Unit on CPU Rack, and Option Boards

1 Right-click CPU Rack under Configurations and Setup - CPU/Expansion Racks in the Multi-

view Explorer and select Production Information.

The Production Information Dialog Box is displayed.

Changing Information Displayed in Production Information Dialog Box



1 Click the Show Detail

Show Outline Button at the lower right of the Production Information

Dialog Box.

The view will change between the production information details and outline.

NX-series CPU Unit FINS Function User's Manual (W596)

Versions

Outline View Detail View

The information that is displayed is different for the Outline View and Detail View. The Detail

View displays the unit version, hardware revision, and various versions. The Outline View dis-

plays only the unit version.

Note The hardware revision is separated by “/” and displayed on the right of the hardware version. The

hardware revision is not displayed for the Unit that the hardware revision is in blank.

Checking the Unit Version of an EtherCAT Slave



You can use the Production Information while the Sysmac Studio is online to check the unit version

of an EtherCAT slave.

Use the following procedure to check the unit version.

1 Double-click EtherCAT

click EtherCAT under Configurations and Setup and select Edit from the menu.

The EtherCAT Tab Page is displayed for the Controller Configurations and Setup Layer.

under Configurations and Setup in the Multiview Explorer. Or, right-

2 Right-click the master on the EtherCAT Tab Page and select Display Production Information.

The Production Information Dialog Box is displayed.

The unit version is displayed after “Rev.”

Changing Information Displayed in Production Information Dialog Box



1 Click the

Dialog Box.

The view will change between the production information details and outline.

Show Detail or Show Outline Button at the lower right of the Production Information

Outline View Detail View

NX-series CPU Unit FINS Function User's Manual (W596)

Versions

Unit Versions of CPU Units and Sysmac Studio Versions

The functions that are supported depend on the unit version of the NX-series CPU Unit. The version of

Sysmac Studio that supports the functions that were added for an upgrade is also required to use

those functions.

Refer to the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501)

tween the unit versions of the

are supported by each unit version.

CPU Units and the Sysmac Studio versions and for the functions that

for the relationship be-

NX-series CPU Unit FINS Function User's Manual (W596)

Related Manuals

The following manual are related. Use these manuals for reference.

Manual name Cat. No. Model Application Contents

NX-series CPU Unit

Hardware User's Manual

NX-series

NX102 CPU Unit

Hardware

User

’

s Manual

NJ/NX-series CPU Unit

Software User

NX-series

CPU Unit

FINS Function

s Manual

User’

NJ/NX-series

roubleshooting Manual

Sysmac Studio Version 1

Operation Manual

CS/CJ-series

Ethernet unit

Application Construction

User's Manual

CS/CJ/CP/NSJ-series

Communications Commands

Reference Manual

’

s Manual

W535

W593

W501

W596

W503

W504 SYSMAC

W421 CS1W-ETN21

W342

NX701-££££

NX102-££££

NX701-££££

NX102-££££

NX1P2-££££

NJ501-££££

NJ301-££££

NJ101-££££

NX701-££20

NX102-££££

NX701-

NX102-££££

NX1P2-££££

NJ501-££££

NJ301-££££

NJ101-££££

-SE2£££

CJ1W-ETN21

CS1G/H-CPU

CS1D-CPU£££

CS1W

CJ1G/H-CPU£££

CJ1M-CPU££

CJ2H-CPU6£

CJ2M-CPU££

CJ1W-SCU££-V1

CP1H-£££££

CP1L-M/L£££

CP1E-£££D£

££££

-SC

£££-V1

Learning the basic

specifications of the

NX701 CPU Units,

including introductory

information, design-

ing, installation, and

maintenance.

Mainly hardware in-

formation is provided.

Learning the basic

specifications of the

NX102 CPU Units,

including introductory

information, design-

ing, installation, and

maintenance.

Mainly hardware in-

formation is provided.

Learning how to pro-

gram and set up an

NJ/NX-series CPU

Unit.

Mainly software infor-

mation is provided.

Using the FINS func-

tion of an NX-series

CPU Unit.

Learning about the

errors that may be

detected in an

NJ/NX-series Con-

troller

Learning about the

operating procedures

and functions of the

Sysmac Studio.

Using an Ethernet

unit

Learning the detailed

££

communication com-

mands for the

CS/CJ/CP-series

CPU Unit and NSJ-

series.

Related Manuals

An introduction to the entire NX701 system is

provided along with the following information on

the CPU Unit.

• Features and system configuration

• Introduction

• Part names and functions

• General specifications

• Installation and wiring

• Maintenance and inspection

An introduction to the entire NX102 system is

provided along with the following information on

the CPU Unit.

• Features and system configuration

• Introduction

• Part names and functions

• General specifications

• Installation and wiring

• Maintenance and Inspection

The following information is provided on a Con-

troller built with an NJ/NX-series CPU Unit.

• CPU Unit operation

• CPU Unit features

• Initial settings

• Programming based on IEC 61

specifications

Describes the FINS function of an NX-series CPU

Unit.

Concepts on managing errors that may be detect-

ed in an NJ/NX-series Controller and information

on individual errors are described.

Describes the operating procedures of the Sys-

mac Studio.

This manual describes the mail send function,

mail receive function, socket service function,

clock information automatic adjustment function,

FTP server function, and host application creation

of FINS communications.

This manual describes the C mode commands

and FINS commands for the CPU unit in detail.

131-3 language

NX-series CPU Unit FINS Function User's Manual (W596)

+ 47 hidden pages

Omron NX701-1720, NX701-1620, NX102-12, NX102-10, NX102-11 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Intended Audience

Applicable Products

Relevant Manuals

Terms and Conditions Agreement

Warranty, Limitations of Liability

Application Considerations

Disclaimers

Manual Structure

Page Structure

Special Information

Precaution on Terminology

CONTENTS

Safety Precautions

Precautions for Safe Use

Precautions for Correct Use

Regulations and Standards

Versions

Checking Versions

Unit Versions of CPU Units and Sysmac Studio Versions

Related Manuals