Page 1
G3VM-61H1
MOS FET Relays
MOS FET Relays Designed for Switching
Minute Signals and Analog Signals.
• Continuous load current of 400 mA.
RoHS compliant
Note: The actual product is marked differently from the
image shown here.
■ Application Examples ■
• Semiconductor test equipment
• Test & Measurement equipment
• Communication equipment
• Data loggers
Note: The actual product is marked differently from the image shown here.
■ List of Models
Package type Contact form Terminals
SOP6
* The AC peak and DC value are given for the load voltage.
1a
(SPST-NO)
Surface-mounting Terminals 60 V
Load voltage
(peak value) *
■ Absolute Maximum Ratings (Ta = 25°C)
Item Symbol Rating Unit Measurement conditions
LED forward current IF 50 mA
Repetitive peak LED forward current
LED forward current reduction rate
Input
LED reverse voltage VR 5 V
Connection temperature
Load voltage (AC peak/DC)
Continuous
load current
ON current
Output
reduction
rate
Connection temperature
Dielectric strength between
I/O (See note 1.)
Ambient operating temperature
Ambient storage temperature
Soldering temperature -260 °C10 s
Connection A
Connection B
Connection C
Connection A
Connection B
Connection C
IFP 1 A 100 µs pulses, 100 pps
∆IF/°C −0.5 mA/°C Ta ≥ 25°C
TJ 125 °C
VOFF 60 V
IO
∆IO/°C
TJ 125 °C
I-O 1500 Vrms AC for 1 min
V
Ta −40 to +85 °C With no icing or condensation
Tstg −55 to +125 °C With no icing or condensation
400
400
800
−4.0
−4.0
−8.0
Connection A: AC peak/DC
mA
Connection B and C: DC
mA/°C Ta ≥ 25°C
Terminal Arrangement /Internal Connections
6 54
OMRON logo
Pin 1 mark
13
2
Model
G3VM-61H1 75 -
G3VM-61H1 (TR) -2,500
Note: 1.
The dielectric strength between the input and output was
checked by applying voltage between all pins as a group on
the LED side and all pins as a group on the light-receiving side.
Connection Diagram
Connection A
Connection B
Connection C
Minimum package quantity
Number per tube
932
1
2
3
1
2
3
1
2
3
Model name
LOT.No.
Number per tape and reel
6
Load
5
AC
or
DC
4
6
Load
5
DC
4
6
Load
5
DC
4
■ Electrical Characteristics (Ta = 25°C)
Item Symbol
LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA
Reverse current IR --10 µA VR = 5 V
Capacity between terminals
Input
Trigger LED forw ard current
Maximum
resistance
with output ON
Output
Current leakage when the r elay is open
Capacity between terminals
Capacity between I/O terminals
Insulation resistance between I/O terminals
Turn-ON time tON - 0.8 2.0 ms
Turn-OFF time tOFF -0.10.5ms
Connection A
Connection B
Connection C
Minimum
Typical
Maximum
CT - 30 - pF V = 0, f = 1 MHz
IFT -1.63mA IO = 400 mA
RON
ILEAK --1.0µA VOFF = 60 V
Coff - 130 - pF V = 0, f = 1 MHz
CI-O - 0.8 - pF f = 1 MHz, VS = 0 V
RI-O 1000 - - MΩ
-12Ω IF = 5 mA, IO = 400 mA
- 0.5 1 Ω IF = 5 mA, IO = 400 mA
-0.25- Ω IF = 5 mA, IO = 800 mA
Unit Measurement conditions
1
V
I-O
= 500 VDC, ROH ≤ 60 %
I
F = 5 mA, RL = 200 Ω,
V
DD = 20 V (See note 2.)
Note: 2. Turn-ON and Turn-OFF Times
IF
1
2
IF
VOUT
10%
tON tOFF
64RL
90%
VDD
VOUT
Page 2
G3VM-61H1 MOS FET Relays
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item Symbol Minimum Typical Maximum Unit
Load voltage (AC peak/DC) VDD - - 48 V
Operating LED forward current
Continuous load current (AC peak/DC)
Ambient operating temperature
■ Engineering Data
IF 57.525mA
IO -- 400mA
Ta −20 - 65 °C
LED forward current vs. Ambient
temperature
100
(mA)
F
80
60
40
LED forward current I
20
0
-20
IF - Ta
Ambient temperature Ta (°C)
120100 80 60 40 020
Continuous load current vs. On-state
voltage
IO - V
600
Ta = 25°C
(mA)
Connection A
O
400
F = 5 mA
I
200
0
-200
Continuous load current I
-400
ON
Continuous load current vs. Ambient
temperature
1200
(mA)
O
1000
Connection C
800
600
Connection A and B
400
Continuous load current I
200
0
-20
IO - Ta
Ambient temperature Ta (°C)
120100 80 60 40 020
On-state resistance vs. Ambient
temperature
5
IO = 400 mA
(Ω)
F
= 5 mA
I
ON
4
Connection A
3
2
On-state resistance R
1
RON - Ta
LED forward current vs. LED forward
voltage
IF - V
100
Ta = 25°C
(mA)
F
30
10
3
LED forward current I
1
0.3
0.1
F
1.40.6 0.8 1 1.2 1.6 1.8
LED forward voltage VF (V)
Trigger LED forward current vs.
Ambient temperature
5
IO = 400 mA
t < 1s
(mA)
FT
Connection A
4
3
2
1
Trigger LED forward current I
IFT - Ta
-600
-0.6 -0.4 0.2-0.2 0 0.4 0.6
0
-20
On-state voltage VON (V)
Turn ON, Turn OFF time vs. LED
forward current
tON, t
OFF
5000
(µs)
3000
OFF
, t
ON
1000
500
300
100
Turn ON, Turn OFF time t
50
30
- IF
Ta = 25°C
DD = 20 V
V
L = 200 Ω
R
tOFF
tON
10531
LED forward current IF (mA)
100 3005030
Turn ON, Turn OFF time vs. Ambient
temperature
3000
1000
300
100
30
Turn ON, Turn OFF time tON, tOFF (µs)
10
-20
■ Safety Precautions
• Refer to "Common Precautions" for all G3VM models.
Ambient temperature Ta (°C)
tON, tOFF - Ta
VDD = 20 V
R
I
Ambient temperature Ta (°C)
tON
tOFF
L = 200 Ω
F = 5 mA
100 80 60 40 020
0
-20
Current leakage vs. Ambient
temperature
I
10080 60 40 020
30
(nA)
VOFF = 60 V
LEAK
10
3
Current leakage I
1
0.3
0.1
-20
Ambient temperature Ta (°C)
LEAK
- Ta
Ambient temperature Ta (°C)
10080 60 40 020
10080 60 40 020
2
Page 3
Appearance/Dimensions SOP6 type
SOP (Small Outline Package)
■ Appearance
SOP (Small Outline Package)
SOP6
OMRON logo
Pin 1 mark
Note: The actual product is marked differently from the image shown here.
932
Model name
LOT.No.
■ Dimensions (Unit: mm)
Surface-mounting Terminals
Weight: 0.13 g
±0.25
6.3
±0.25
2.54
Note: The actual product is marked differently from the image shown here.
4.4
0.1
0.4
±0.25
2.1 max.
±0.1
±0.1
0.15
7.0
0.6
±0.3
±0.4
Actual Mounting Pad
Dimensions
(Recommended Value, TOP VIEW)
6 to 6.3
1.2
0.8
2.542.54
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Note: Do not use this document to operate the Unit.
Contact: www.omron.com/ecb
Cat. No. K156-E1-01
0412(0412)(O)
Loading...