Omron G3PE-245B DC12-24, G3PE-215B DC12-24, G3PE-215BL DC12-24, G3PE-225BL DC12-24, G3PE-235BL DC12-24 User Manual

...

Download

New Product

Solid State Relays for Heaters

Single-phase G3PE

Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications.

• RoHS compliant.

• Models also available with no zero cross

• Improved surge dielectric strength for output circuits.

• Compact with a slim profile.

• Mount to DIN Track or with screws.

• Certification pending for UL, CSA, and EN (TÜV certification).

Ordering Information

List of Models

* The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering

Data on page 3.

Number of

phases

Isolation

method

Operation

indicator

Rated input

voltage

Zero cross

function

Applicable load * Model

Single-phase

Phototriac coupler

Yes (yellow) 12 to 24 VDC

Yes

15 A, 100 to 240 VAC G3PE-215B DC12-24 25 A, 100 to 240 VAC G3PE-225B DC12-24 35 A, 100 to 240 VAC G3PE-235B DC12-24 45 A, 100 to 240 VAC G3PE-245B DC12-24

15 A, 100 to 240 VAC G3PE-215BL DC12-24 25 A, 100 to 240 VAC G3PE-225BL DC12-24 35 A, 100 to 240 VAC G3PE-235BL DC12-24 45 A, 100 to 240 VAC G3PE-245BL DC12-24

Yes

15 A, 200 to 480 VAC G3PE-515B DC12-24 25 A, 200 to 480 VAC G3PE-525B DC12-24 35 A, 200 to 480 VAC G3PE-535B DC12-24 45 A, 200 to 480 VAC G3PE-545B DC12-24

15 A, 200 to 480 VAC G3PE-515BL DC12-24 25 A, 200 to 480 VAC G3PE-525BL DC12-24 35 A, 200 to 480 VAC G3PE-535BL DC12-24 45 A, 200 to 480 VAC G3PE-545BL DC12-24

Refer to Safety Precautions on page 18.

Single-phase G3PE

Specifications

Certification

UL508 (pending), CSA22.2 No.14 (pending), and EN60947-4-3 (pending)

Note: The G3PE-2@@B (L) Series has already been certified for the above standards.

Ratings

Input (at an Ambient Temperature of 25°C)

Output

* The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering

Data on page 3.

Characteristics

Item

Model

Rated voltage

Operating voltage

range

Rated input current

Voltage level

Must operate voltage Must release voltage

G3PE-@@@B

12 to 24 VDC 9.6 to 30 VDC

7 mA max.

9.6 VDC max. 1.0 VDC max.

G3PE-@@@BL 15 mA max.

Model

G3PE-215B(L) G3PE-225B(L) G3PE-235B(L) G3PE-245B(L) G3PE-515B(L) G3PE-525B(L) G3PE-535B(L) G3PE-545B(L)

Item Rated load voltage 100 to 240 VAC (50/60 Hz) 200 to 480 VAC (50/60 Hz) Load voltage range 75 to 264 VAC (50/60 Hz) 180 to 528 VAC (50/60 Hz)

Applicable load current *0.1 to 15 A

(at 40°C)

0.1 to 25 A

(at 40°C)

0.5 to 35 A

(at 25°C)

0.5 to 45 A

(at 25°C)

0.1 to 15 A

(at 40°C)

0.1 to 25 A

(at 40°C)

0.5 to 35 A

(at 25°C)

0.5 to 45 A

(at 25°C)

Inrush current resistance

150 A

(60 Hz,

1cycle)

220 A

(60 Hz,

1 cycle)

440 A

(60 Hz, 1 cycle)

150 A

(60 Hz,

1 cycle)

220 A

(60 Hz,

1cycle)

440 A

(60 Hz, 1 cycle)

Permissible I2t (reference value)

121A

s 260A2s 1,260A2s 128A2s 1,350A2s 6,600A2s

Applicable load (resistive load)

3 kW

(at 200 VAC)

5 kW

(at 200 VAC)

7 kW

(at 200 VAC)

9 kW

(at 200 VAC)

6 kW

(at 400 VAC)

10 kW

(at 400 VAC)

14 kW

(at 400 VAC)

18 kW

(at 400 VAC)

Model

G3PE

-215B

G3PE

-225B

G3PE

-235B

G3PE

-245B

G3PE

-215BL

G3PE

-225BL

G3PE

-235BL

G3PE

-245BL

Item Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.6 V (RMS) max. Leakage current 10 mA max. (at 200 VAC) Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 2,500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 to10 Hz, 0.375-mm single amplitude (0.75-mm double amplitude) (Mounted to DIN track) Shock resistance Destruction: 294 m/s2 (Mounted to DIN track)

Ambient storage temperature

−30 to 100°C (with no icing or condensation)

Ambient operating temperature

−30 to 80°C (with no icing or condensation)

Ambient operating humidity

45% to 85%

Weight Approx. 240 g Approx. 400 g Approx. 240 g Approx. 400 g

Model

G3PE

-515B

G3PE

-525B

G3PE

-535B

G3PE

-545B

G3PE

-515BL

G3PE

-525BL

G3PE

-535BL

G3PE

-545BL

Item Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.8 V (RMS) max. Leakage current 20 mA max. (at 480 VAC) Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 2,500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 to10 Hz, 0.375-mm single amplitude (0.75-mm double amplitude) (Mounted to DIN track) Shock resistance Destruction: 294 m/s2 (Mounted to DIN track)

Ambient storage temperature

−30 to 100°C (with no icing or condensation)

Ambient operating temperature

−30 to 80°C (with no icing or condensation)

Ambient operating humidity

45% to 85%

Weight Approx. 240 g Approx. 400 g Approx. 240 g Approx. 400 g

Single-phase G3PE

Engineering Data

Input Voltage vs. Input Impedance and Input Voltage vs. Input Current G3PE-2@@B G3PE-2@@BL G3PE-5@@B

G3PE-5@@BL

Load Current vs. Ambient Temperature G3PE-215B(L), G3PE-225B(L) G3PE-515B(L), G3PE-525B(L)

G3PE-235B(L), G3PE-245B(L) G3PE-535B(L), G3PE-545B(L)

Inrush Current Resistance: Non-repetitive

Keep the inrush current to below the inrush current resistance value (i.e., below the broken line) if it occurs repetitively.

G3PE-215B(L), G3PE-515B(L) G3PE-225B(L), G3PE-525B(L) G3PE-235B(L), G3PE-245B(L)

G3PE-535B(L), G3PE-545B(L)

0 5

10 15 20 25 30 35

Input voltage (V)

Input current

Input impedance

Input current (mA)

Input impedance (kΩ)

Ta = 25°C

15 14 13 12 11 10

9 8 7 6 5 4 3 2 1 0

0 5

10 15 20 25 30 35

Input voltage (V)

Input current

Input impedance

Input current (mA)

Input impedance (kΩ)

Ta = 25°C

0 5

10 15 20 25 30 35

Input voltage (V)

Input current

Input impedance

Input current (mA)

Input impedance (kΩ)

Ta = 25°C

15 14 13 12 11 10

9 8 7 6 5 4 3 2 1 0

0 5

10 15 20 25 30 35

Input voltage (V)

Input current

Input impedance

Input current (mA)

Input impedance (kΩ)

Ta = 25°C

Load current (A)

−30 −20

0 20 40 60 80 100

Ambient temperature (°C)

G3PE-225B(L) G3PE-525B(L)

G3PE-215B(L) G3PE-515B(L)

−30 −20

0 20 40 60 80 100

18 17 14

50 45

G3PE-245B(L) G3PE-545B(L)

G3PE-235B(L)

G3PE-535B(L)

Load current (A)

Ambient temperature (°C)

250

200

150

100

Inrush current (A. Peak)

Energized time (ms)

10 30 50

100

300 500 1,000 3,000 5,000

250

200

150

100

10 30 50

100

300 500 1,000 3,000 5,000

Inrush current (A. Peak)

Energized time (ms)

500

400

300

200

100

10 30 50

100

300 500 1,000 3,000 5,000

Inrush current (A. Peak)

Energized time (ms)

Single-phase G3PE

Close Mounting (3 or 8 SSRs) G3PE-215B(L) G3PE-225B(L) G3PE-235B(L) G3PE-245B(L)

G3PE-515B(L) G3PE-525B(L) G3PE-535B(L) G3PE-545B(L)

Close Mounting Example

−40 −20 0 20 40 60 80 100 Ambient temperature (°C)

Load current (A)

5.7

15 13

3 Relays

8 Relays

−40 −20 0 20 40 60 80 100

20 19

Ambient temperature (°C)

Load current (A)

8 Relays

3 Relays

−40 −20 0 20 40 60 80 100

30 28 26

Ambient temperature (°C)

Load current (A)

8 Relays

3 Relays

31 30 29

−40 −20

0 20 40 60 80 100

Ambient temperature (°C)

Load current (A)

8 Relays

3 Relays

5.7

15 13

−40 −20

0 20 40 60 80 100

Ambient temperature (°C)

Load current (A)

3 Relays

8 Relays

Ambient temperature (°C)

Load current (A)

3 Relays

8 Relays

−40 −20

0 20 40 60 80 100

−40 −20 0 20 40 60 80 100

30 28 26

Ambient temperature (°C)

Load current (A)

3 Relays

8 Relays

31 30 29

−40 −20

0 20 40 60 80 100

Ambient temperature (°C)

Load current (A)

3 Relays

8 Relays

DIN Trac

Single-phase G3PE

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Solid State Relays

G3PE-215B(L) G3PE-225B(L) G3PE-515B(L) G3PE-525B(L)

Two , M 4

4.2

6.3

Two , M3.5

Note: Without terminal cover.

±0.2

Two ,

4.6 dia.

100 max.

±0.2

22.5 max.

Elliptical hole:

4.6 × 5.6

Note: With terminal cover.

4.5

(90)

(85)

(100)

±0.3

Three, 4.5 dia. or M4

Mounting Holes

±0.3

(+)

(−)

G3PE-5@@B

(+)

(−)

G3PE-2@@B

Terminal Arrangement/Internal Circuit Diagram

Output side

tiucric reggirT

IInput side

Output side

tiucric reggirT

iu cr

i c t

u pn I

ti u cr ic t u pn I

G3PE-235B(L) G3PE-245B(L) G3PE-535B(L) G3PE-545B(L)

13.5

44.5 max.

Two , M 5

Two , M3.5

Note: Without terminal cover.

±0.2

4.6 dia.

100 max.

±0.2

Elliptical hole:

4.6 × 5.6

Note: With terminal cover.

(90)

(85)

(100)

±0.3

Three, 4.5 dia. or M4

Mounting Holes

±0.3

(+)

(−)

G3PE-5@@B

(+)

(−)

G3PE-2@@B

Terminal Arrangement/Internal Circuit Diagram

Output side

tiucric reggirT

IInput side

Output side

tiucric reggirT

iu cr

i c t

u pn I

ti u cr ic t u pn I

New Product

Solid State Contactors for Heaters

Three-phase G3PE

Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.

• RoHS compliant.

• Improved surge dielectric strength for output circuits.

• Slim design with 3-phase output and built-in heat sinks.

• DIN Track mounting types and screw mounting types are available. All DIN Track mounting types mount to DIN Track (applicable DIN Track: TR35-15Fe (IEC 60715)).

• Certification pending for UL, CSA, and EN (TÜV certification).

Ordering Information

List of Models

Models with Built-in Heat Sinks

*1. The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering

Data on page 10.

*2. The applicable DIN Track is the TR35-15Fe (IEC 60715). For details, refer to the mounting information in the Safety Precautions.

Refer to Safety Precautions on page 18.

Number of

phases

Insulation

method

Operation

indicator

Rated input

voltage

Zero cross

function

Type Applicable load *1

Number of

poles

Model

Three-phase

Phototriac

coupler

Yes (yellow) 12 to 24 VDC Yes

DIN track

mounting *2

15 A, 100 to 240 VAC

3 G3PE-215B-3N DC12-24 2 G3PE-215B-2N DC12-24

25 A, 100 to 240 VAC

3 G3PE-225B-3N DC12-24 2 G3PE-225B-2N DC12-24

35 A, 100 to 240 VAC

3 G3PE-235B-3N DC12-24 2 G3PE-235B-2N DC12-24

45 A, 100 to 240 VAC

3 G3PE-245B-3N DC12-24 2 G3PE-245B-2N DC12-24

15 A, 200 to 480 VAC

3 G3PE-515B-3N DC12-24 2 G3PE-515B-2N DC12-24

25 A, 200 to 480 VAC

3 G3PE-525B-3N DC12-24 2 G3PE-525B-2N DC12-24

35 A, 200 to 480 VAC

3 G3PE-535B-3N DC12-24 2 G3PE-535B-2N DC12-24

45 A, 200 to 480 VAC

3 G3PE-545B-3N DC12-24 2 G3PE-545B-2N DC12-24

Screw

mounting

15 A, 100 to 240 VAC

3 G3PE-215B-3 DC12-24 2 G3PE-215B-2 DC12-24

25 A, 100 to 240 VAC

3 G3PE-225B-3 DC12-24 2 G3PE-225B-2 DC12-24

35 A, 100 to 240 VAC

3 G3PE-235B-3 DC12-24 2 G3PE-235B-2 DC12-24

45 A, 100 to 240 VAC

3 G3PE-245B-3 DC12-24 2 G3PE-245B-2 DC12-24

15 A, 200 to 480 VAC

3 G3PE-515B-3 DC12-24 2 G3PE-515B-2 DC12-24

25 A, 200 to 480 VAC

3 G3PE-525B-3 DC12-24 2 G3PE-525B-2 DC12-24

35 A, 200 to 480 VAC

3 G3PE-535B-3 DC12-24 2 G3PE-535B-2 DC12-24

45 A, 200 to 480 VAC

3 G3PE-545B-3 DC12-24 2 G3PE-545B-2 DC12-24

Three-phase G3PE

Models with Externally Attached Heat Sinks

* The rated load current depends on the heat sink or radiator that is mounted. It also depends on the ambient temperature. For details, refer to

Load Current vs. Ambient Temperature.

Accessories (Order Separately)

Heat Sink

Number of

phases

Insulation

method

Operation

indicator

Rated input

voltage

Zero cross

function

Type Applicable load *

Number of poles

Model

Three-phase

Phototriac

coupler

Yes (yellow) 12 to 24 VDC Yes

Externally attached heat sinks

15 A, 100 to 240 VAC

3 G3PE-215B-3H DC12-24 2 G3PE-215B-2H DC12-24

25 A, 100 to 240 VAC

3 G3PE-225B-3H DC12-24 2 G3PE-225B-2H DC12-24

35 A, 100 to 240 VAC

3 G3PE-235B-3H DC12-24 2 G3PE-235B-2H DC12-24

45 A, 100 to 240 VAC

3 G3PE-245B-3H DC12-24 2 G3PE-245B-2H DC12-24

15 A, 200 to 480 VAC

3 G3PE-515B-3H DC12-24 2 G3PE-515B-2H DC12-24

25 A, 200 to 480 VAC

3 G3PE-525B-3H DC12-24 2 G3PE-525B-2H DC12-24

35 A, 200 to 480 VAC

3 G3PE-535B-3H DC12-24 2 G3PE-535B-2H DC12-24

45 A, 200 to 480 VAC

3 G3PE-545B-3H DC12-24 2 G3PE-545B-2H DC12-24

Heat resistance Rth (s-a) (°C/W) Model

1.67 Y92B-P50

1.01 Y92B-P100

0.63 Y92B-P150

0.43 Y92B-P200

0.36 Y92B-P250

Three-phase G3PE

Specifications

Certification

UL508 (pending), CSA22.2 No.14 (pending), and EN60947-4-3 (pending)

Ratings (at an Ambient Temperature of 25°C)

Operating Circuit (All Models)

Main Circuit of Models with Built-in Heat Sinks

*1. The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering

Data on page 10.

*2. Applicable Load

Use the following formula to calculate the maximum total capacity of a heater load for a three-phase balanced load with delta connections.

Maximum load capacity = Load current × Load voltage × √3 Example: 15 A × 200 V × √3 = 5,196 W ≅ 5.1 kW Example: 15 A × 400 V × √3

= 10,392 W ≅ 10.3 kW

Main Circuit of Models with Externally Attached Heat Sinks

* The rated load current depends on the heat sink or radiator that is mounted. It also depends on the ambient temperature.

For details, refer to Load Current vs. Ambient Temperature in Engineering Data on page 10.

Item Model Same for all models

Rated operating voltage 12 to 24 VDC Operating voltage range 9.6 to 30 VDC Rated input current (impedance) 10 mA max. (24 VDC) Must-operate voltage 9.6 VDC max. Must-release voltage 1 VDC min. Insulation method Phototriac Operation indicator Yellow LED

Model G3PE-

215B-

3(N)

G3PE215B-

2(N)

G3PE-

225B-

3(N)

G3PE-

225B-

2(N)

G3PE-

235B-

3(N)

G3PE235B-

2(N)

G3PE-

245B-

3(N)

G3PE-

245B-

2(N)

G3PE-

515B-

3(N)

G3PE-

515B-

2(N)

G3PE-

525B-

3(N)

G3PE-

525B-

2(N)

G3PE-

535B-

3(N)

G3PE-

535B-

2(N)

G3PE-

545B-

3(N)

G3PE-

545B-

2(N)

Item

Rated load voltage 100 to 240 VAC 200 to 480 VAC

Operating voltage range

75 to 264 VAC 180 to 528 VAC

Rated load current *1 15 A (at 40°C) 25 A (at 40°C) 35 A (at 25°C) 40 A (at 25°C) 15 A (at 40°C) 25 A (at 40°C) 35 A (at 25°C) 40 A (at 25°C) Minimum load current 0.2 A 0.5 A

Inrush current resistance (peak value)

150 A

(60 Hz, 1 cycle)

220 A

(60 Hz, 1 cycle)

440 A

(60 Hz, 1 cycle)

220 A

(60 Hz, 1 cycle)

440 A

(60 Hz, 1 cycle)

Permissible I2t (reference value)

121A2s 260A2s 1,260A2s 260A2s 1,260A2s

Applicable load (resistive load: AC1 class) *2

5.1 kW

(at 200 VAC)

8.6 kW

(at 200 VAC)

12.1 kW

(at 200 VAC)

15.5 kW

(at 200 VAC)

12.5 kW

(at 480 VAC)

20.7 kW

(at 480 VAC)

29.0 kW

(at 480 VAC)

37.4 kW

(at 480 VAC)

Model G3PE-

215B-

G3PE215B-

G3PE-

225B-

3HH

G3PE-

225B-

G3PE-

235B-

G3PE235B-

G3PE-

245B-

G3PE-

245B-

G3PE-

515B-

G3PE-

515B-

G3PE-

525B-

G3PE-

525B-

G3PE-

535B-

G3PE-

535B-

G3PE-

545B-

G3PE-

545B-

Item

Rated load voltage 100 to 240 VAC 200 to 480 VAC

Operating voltage range

75 to 264 VAC 180 to 528 VAC

Rated load current * 15 A (at 40°C) 25 A (at 40°C) 35 A (at 25°C) 40 A (at 25°C) 15 A (at 40°C) 25 A (at 40°C) 35 A (at 25°C) 40 A (at 25°C) Minimum load current 0.2 A 0.5 A

Inrush current resistance (peak value)

150 A

(60 Hz, 1 cycle)

220 A

(60 Hz, 1 cycle)

440 A

(60 Hz, 1 cycle)

220 A

(60 Hz, 1 cycle)

440 A

(60 Hz, 1 cycle)

Permissible I2t (reference value)

121A2s 260A2s 1,260A2s 260A2s 1,260A2s

Applicable load (resistive load: AC1 class)

Refer to Engineering Data on page 10.

Three-phase G3PE

Characteristics

Models with Built-in Heat Sinks

* The leakage current of phase S will be approximately √3 times larger if the 2-element model is used.

Models with Externally Attached Heat Sinks

* The leakage current of phase S will be approximately √3 times larger if the 2-element model is used.

Heat Sinks

Model G3PE-

215B-

3(N)

G3PE-

215B-

2(N)

G3PE225B-

3(N)

G3PE-

225B-

2(N)

G3PE-

235B-

3(N)

G3PE-

235B-

2(N)

G3PE-

245B-

3(N)

G3PE-

245B-

2(N)

G3PE-

515B-

3(N)

G3PE-

515B-

2(N)

G3PE-

525B-

3(N)

G3PE-

525B-

2(N)

G3PE-

535B-

3(N)

G3PE-

535B-

2(N)

G3PE545B-

3(N)

G3PE-

545B-

2(N)

Item

Operate time

1/2 of load power source cycle + 1 ms max.

Release time

1/2 of load power source cycle + 1 ms max.

Output ON voltage drop

1.6 V (RMS) max. 1.8 V (RMS) max.

Leakage current *

10 mA max. (at 200 VAC) 20 mA max. (at 480 VAC)

Insulation resistance

100 MΩ min. (at 500 VDC)

Dielectric strength

2,500 VAC, 50/60 Hz for 1 min

Vibration resistance

• DIN Track mounting: 10 to 55 to 10 Hz, 0.175-mm single amplitude (0.35-mm double amplitude)

• Screw mounting: 10 to 55 to 10 Hz, 0.375-mm single amplitude (0.75-mm double amplitude)

Shock resistance

294 m/s2 (reverse mounting: 98 m/s2)

Ambient storage temperature

−30 to 100°C (with no icing or condensation)

Ambient operating temperature

−30 to 80°C (with no icing or condensation)

Ambient operating humidity

45% to 85%

Weight Approx. 1.25 kg

Ap-

prox.

1.45 kg

Ap-

prox.

1.25 kg

Ap-

prox.

1.65 kg

Ap-

prox.

1.45 kg

Ap-

prox.

2.0 kg

Ap-

prox.

1.65 kg

Approx. 1.25 kg

Ap-

prox.

1.45 kg

Ap-

prox.

1.25 kg

Ap-

prox.

1.65 kg

Ap-

prox.

1.45 kg

Ap-

prox.

2.0 kg

Ap-

prox.

1.65 kg

Model G3PE-

215B-

G3PE-

215B-

G3PE225B-

G3PE-

225B-

G3PE-

235B-

G3PE-

235B-

G3PE-

245B-

G3PE-

245B-

G3PE-

515B-

G3PE-

515B-

G3PE-

525B-

G3PE-

525B-

G3PE-

535B-

G3PE-

535B-

G3PE545B-

G3PE-

545B-

Item

Operate time

1/2 of load power source cycle + 1 ms max.

Release time

1/2 of load power source cycle + 1 ms max.

Output ON voltage drop

1.6 V (RMS) max. 1.8 V (RMS) max.

Leakage current *

10 mA max. (at 200 VAC) 20 mA max. (at 480 VAC)

Insulation resistance

100 MΩ min. (at 500 VDC)

Dielectric strength

2,500 VAC, 50/60 Hz for 1 min

Vibration resistance

10 to 55 to 10 Hz, 0.375-mm single amplitude (0.75-mm double amplitude)

Shock resistance

Destruction: 294 m/s

Ambient storage temperature

−30 to 100°C (with no icing or condensation)

Ambient operating temperature

−30 to 80°C (with no icing or condensation)

Ambient operating humidity

45% to 85%

Weight Approx. 300 g

Model Weight

Y92B-P50 Approx. 450 g Y92B-P100 Approx. 450 g Y92B-P150 Approx. 600 g Y92B-P200 Approx. 850 g Y92B-P250 Approx. 1,200 g

Three-phase G3PE

Engineering Data

Input Voltage vs. Input Impedance and Input Voltage vs. Input Current

G3PE-2@@B-@@

G3PE-5@@B-@@

5 10 15 20 25 30 35

Input voltage (V)

Input current

Input impedance

Input current (mA)

Input impedance (kΩ)

15 14 13 12 11 10

9 8 7 6 5 4 3 2 1 0

0 5

10 15 20 25 30 35

Ta = 25°C

Input voltage (V)

Input current

Input impedance

Input current (mA)

Input impedance (kΩ)

Load Current vs. Ambient Temperature

Models with Built-in Heat Sinks G3PE-215B-3(N), G3PE-225B-3(N)

G3PE-215B-2(N), G3PE-225B-2(N) G3PE-515B-3(N), G3PE-525B-3(N) G3PE-515B-2(N), G3PE-525B-2(N)

G3PE-235B-3(N), G3PE-245B-3(N) G3PE-235B-2(N), G3PE-245B-2(N) G3PE-535B-3(N), G3PE-545B-3(N) G3PE-535B-2(N), G3PE-545B-2(N)

−30 −20 0 20 40 60 80 100

G3PE-225B-3(N) G3PE-225B-2(N) G3PE-525B-3(N) G3PE-525B-2(N)

G3PE-215B-3(N) G3PE-215B-2(N) G3PE-515B-3(N) G3PE-515B-2(N)

Load current (A)

Ambient temperature (°C)

−30 −20 0 20 40 60 80 100

G3PE-245B-3(N) G3PE-245B-2(N) G3PE-545B-3(N) G3PE-545B-2(N)

G3PE-235B-3(N) G3PE-235B-2(N) G3PE-535B-3(N) G3PE-535B-2(N)

Load current (A)

Ambient temperature (°C)

Models with Externally Attached Heat Sinks G3PE-215B-3H(-2H)

G3PE-225B-3H(-2H) G3PE-515B-3H(-2H) G3PE-525B-3H(-2H)

G3PE-235B-3H(-2H) G3PE-245B-3H(-2H) G3PE-535B-3H(-2H) G3PE-545B-3H(-2H)

−30 −20 0 20 40 60 80 100

G3PE-225B-3H(-2H) G3PE-525B-3H(-2H)

G3PE-215B-3H(-2H) G3PE-515B-3H(-2H)

Load current (A)

Ambient temperature (°C)

−30 −20 0 20 40 60 80 100

G3PE-235B-3H(-2H) G3PE-245B-3H(-2H) G3PE-535B-3H(-2H) G3PE-545B-3H(-2H)

Load current (A)

Ambient temperature (°C)

Three-phase G3PE

Models with Externally Attached Heat Sinks Heat Resistance Rth (Junction/SSR Back Surface)

Heat Resistance of Heat Sinks

Note: If a commercially available heat sink is used, use one that has

a heat resistance equal to or lower than a standard OMRON Heat Sink.

Inrush Current Resistance: Non-repetitive

Keep the inrush current to below the inrush current resistance value (i.e., below the broken line) if it occurs repetitively.

G3PE-215B-3(N)(H) G3PE-215B-2(N)(H)

G3PE-225B-3(N)(H), G3PE-525B-3(N)(H) G3PE-225B-2(N)(H), G3PE-525B-2(N)(H) G3PE-515B-3(N)(H), G3PE-515B-2(N)(H),

G3PE-235B-3(N)(H), G3PE-535B-3(N)(H) G3PE-235B-2(N)(H), G3PE-535B-2(N)(H) G3PE-245B-3(N)(H), G3PE-545B-3(N)(H) G3PE-245B-2(N)(H), G3PE-545B-2(N)(H)

250

200

150

100

10 30 50

100 300 500 1,000 3,000 5,000

Inrush current (A. Peak)

Energized time (ms)

250

200

150

100

10 30 50

100 300 500 1,000 3,000 5,000

Inrush current (A. Peak)

Energized time (ms)

500

400

300

200

100

10 30 50

100 300 500 1,000 3,000 5,000

Inrush current (A. Peak)

Energized time (ms)

Heat Sink Area vs. Load Current (40°C and 80°C)

G3PE-225B-3H G3PE-525B-3H

Note: The heat sink area is the combined

area of all surfaces of the heat sink that radiate heat. For the G3PE-525B-3H, when a current of 18 A flows through the SSR at 40°C, the graph shows that a heat sink area of about 2,500 cm

would be required. Therefore, if the heat sink is square, one side of an aluminum plate in the heat sink must be 36 cm or longer (√2,500

(cm2)/2 =

36 cm (rounded to a whole number)).

Load current (A)

0 10 20 30 40

Heat s ink area ( cm

)

30,000

50,000

10,000

5,000

3,000

1,000

500

300

100

Ambient temperature + 80°C

Ambient temperature + 40°C

Aluminum plate t = 3.0

0 10 20 30 40

30,000

50,000

10,000

5,000

3,000

1,000

500

300

100

Load current (A)

Heat s ink area ( cm

)

Ambient temperature + 80°C

Ambient temperature + 40°C

Aluminum plate t = 3.0

Model Rth (°C/W)

G3PE-215B-3H 1.05 G3PE-225B-3H 0.57 G3PE-235B-3H 0.57 G3PE-245B-3H 0.57

Model Rth (°C/W)

Y92B-P50 1.67 Y92B-P100 1.01 Y92B-P150 0.63 Y92B-P200 0.43 Y92B-P250 0.36

Three-phase G3PE

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Solid State Relays

32.2

Six, M4

0.5 20

Two, 4.6-dia. mounting holes

Four, 8 dia.

Two, M3.5

100

max.

84.5

max.

80 max.

19.1

±0.3

Four, 4.5 dia. or M4

23.2

120 max.

max.

Two, R2.3 mounting holes

Input circuit

Terminal Arrangement/Internal Circuit Diagram

G3PE-2@5B-2N

G3PE-215B-3N

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

(+)

(−)

(+)

(−)

(+)

(−)

(+)

(−)

G3PE-5@5B-2N

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-515E-3N

Note: Without terminal cover. Note: With terminal cover.

Mounting Holes

Models with DIN Track Mounting

G3PE-215B-3N G3PE-215B-2N G3PE-225B-2N G3PE-515B-3N G3PE-515B-2N G3PE-525B-2N

120

max.

84.5

max.

110100

80 max.

32.2

Six, M5 (35-A type) Six, M4 (25-A type)

0.5 20

19.1

±0.3

110

±0.3

23.2

120 max.

max.

Two, 4.6-dia. mounting holes

Four, 8 dia.

Two, M3.5

Four, 4.5 dia. or M4

Two, R2.3 mounting holes

Terminal Arrangement/Internal Circuit Diagram

G3PE-235B-2N

G3PE-225B-3N

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-535B-2N

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-525B-3N

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Models with DIN Track Mounting

G3PE-225B-3N G3PE-235B-2N G3PE-525B-3N G3PE-535B-2N

Note: Without terminal cover. Note: With terminal cover.

Mounting Holes

Three-phase G3PE

Terminal Arrangement/Internal Circuit Diagram

G3PE-245B-2N

G3PE-235B-3N

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-545B-2N

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-535B-3N

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

140

max.

84.5

max.

130120

80 max.

32.2

0.5 20

19.1

±0.3

130

±0.3

23.2

120 max.

max.

Six, M5

Two, 4.6-dia. mounting holes

Four, 8 dia.

Two, M3.5

Four, 4.5 dia. or M4

Two, R2.3 mounting holes

Models with DIN Track Mounting

G3PE-235B-3N G3PE-245B-2N G3PE-535B-3N G3PE-545B-2N

Note: Without terminal cover. Note: With terminal cover.

Mounting Holes

140

max.

84.5

max.

130120

80 max.

110 max.

32.2

0.5 20

19.1

±0.3

130

±0.3

23.2

120 max.

max.

Six, M5

Two, 4.6-dia. mounting holes

Four, 8 dia.

Two, M3.5

Four, 4.5 dia. or M4

Two, R2.3 mounting holes

Terminal Arrangement/Internal Circuit Diagram

G3PE245B-3N

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-545B-3N

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Models with DIN Track Mounting

G3PE-245B-3N G3PE-545B-3N

Note: Without terminal cover. Note: With terminal cover.

Mounting Holes

Three-phase G3PE

0.5 20 20

32.2

Two, M3.5

Six, M4

80 max.

84.5 max.

100 max.

4.6 dia.

4.6 × 5.6 elliptical hole

±0.3

Two, 4.5 dia. or M4

Mounting Holes

55 max.

max.

23.2

19.1

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-215B-2

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-515B-2

Terminal Arrangement/Internal Circuit Diagram

Input circuit

(+)

(−)

Input circuit

(+)

(−)

DIN Track or screw mounting

Models with Screw Mounting

G3PE-215B-2 G3PE-515B-2

Note: Without terminal cover.

Note: With terminal cover.

G3PE-225B-2

G3PE-215B-3

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-525B-2

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-515B-3

Terminal Arrangement/Internal Circuit Diagram

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

80 max.

100

110.5 max.

84.5 max.

0.5 20 20

32.2

±0.3

100

±0.3

Four, 4.5 dia. or M4

70 max.

max.

Four, R2.5

Two, M3.5

Six, M4

Mounting Holes

23.2

19.1

For screw mounting only

Models with Screw Mounting

G3PE-215B-3 G3PE-225B-2 G3PE-515B-3 G3PE-525B-2

Note: Without terminal cover. Note: With terminal cover.

Three-phase G3PE

84.5 max.

80 max.

100

110.5 max.

0.5 20 20

32.2

±0.3

100

±0.3

Four, 4.5 dia. or M4

70 max.

max.

Four, R2.5

Two, M3.5

Six, M5 (G3PE-@35B-2) Six, M4 (G3PE-@25B-3)

Mounting Holes

23.2

19.1

For screw mounting only

G3PE-235B-2

G3PE-225B-3

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-535B-2

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-525B-3

Terminal Arrangement/Internal Circuit Diagram

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Models with Screw Mounting

G3PE-225B-3 G3PE-235B-2 G3PE-525B-3 G3PE-535B-2

Note: Without terminal cover. Note: With terminal cover.

G3PE-245B-2

G3PE-235B-3

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-545B-2

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-535B-3

Terminal Arrangement/Internal Circuit Diagram

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

84.5 max.

80 max.

110 120

130.5 max.

0.5 20 20

32.2

±0.3

120

±0.3

Four, 4.5 dia. or M4

70 max.

max.

Four, R2.5

Two, M3.5

Six, M5

Mounting Holes

23.2

19.1

For screw mounting only

Models with Screw Mounting

G3PE-235B-3 G3PE-245B-2 G3PE-535B-3 G3PE-545B-2

Note: Without terminal cover. Note: With terminal cover.

Three-phase G3PE

84.5 max.

150

80 max.

110 120

130.5 max.

190.5 max.

0.5 20 20

32.2

150

±0.3

120

±0.3

Four, 4.5 dia. or M4

70 max.

max.

Four, R2.5

Two, M3.5

Six, M5

Mounting Holes

23.2

19.1

G3PE-245B-3

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-545B-3

Terminal Arrangement/Internal Circuit Diagram

Input circuit

(+)

(−)

Input circuit

(+)

(−)

For screw mounting only

Models with Screw Mounting

G3PE-245B-3 G3PE-545B-3

Note: Without terminal cover. Note: With terminal cover.

max.

23.2

19.1

84.5 max.

80 max.

0.5 20 20

32.2

Four, 8 dia.

Four, 4.5 dia.

Two, M3.5

Four, 4.5 dia. or M4

±0.3

Mounting Holes

Six, M4 (G3PE-@15B-@H/-@25B-@H) Six, M5 (G3PE-@35B-@H/-@45B-@H)

8 dia.

4.5 dia.

Models with Externally Attached Heat Sinks

G3PE-215B-3H G3PE-215B-2H G3PE-225B-3H G3PE-225B-2H G3PE-235B-3H G3PE-235B-2H G3PE-245B-3H G3PE-245B-2H G3PE-515B-3H G3PE-515B-2H G3PE-525B-3H G3PE-525B-2H G3PE-535B-3H G3PE-535B-2H G3PE-545B-3H G3PE-545B-2H

Note: Without terminal cover.

Note: With terminal cover.

G3PE-2@5B-2H

G3PE-2@5B-3H

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-5@5B-2H

L1/R

T1/U T2/V T3/W

L2/S L3/T

G3PE-5@5B-3H

Terminal Arrangement/Internal Circuit Diagram

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Input circuit

(+)

(−)

Three-phase G3PE

Accessories (Order Separately)

Heat Sink

Y92B-P50 (Mounts to DIN Track.) For G3PE-215B-2H and G3PE-515B-2H

Heat Sink

Y92B-P100 For G3PE-215B-3H, G3PE-225B-2H, G3PE-515B-3H, and G3PE-525B-2H

Heat Sink

Y92B-P150 For G3PE-225B-3H, G3PE-235B-2H, G3PE-525B-3H, and G3PE-535B-2H

Heat Sink

Y92B-P200 For G3PE-235B-3H, G3PE-245B-2H, G3PE-535B-3H, and G3PE-545B-2H

Heat Sink

Y92B-P250 For G3PE-245B-3H and G3PE-545B-3H

68 90

80 max.

80.5 max.

55 max.

100 max.

4.6 dia.

4.6 × 5.6 elliptical hole

±0.3

Two, 4.5 dia. or M4

Mounting Holes

110.5 max.

Four, M4

100

80.5 max.

70 max.

Four, R2.5

±0.3

100

±0.3

Four, 4.5 dia. or M4

Mounting Holes

±0.3

100

±0.3

Four, 4.5 dia. or M4

Mounting Holes

100

110.5 max.

70 max.

Four, M4

Four, R2.5

Mounting Holes

120

70 max.

120

130.5 max.

Four, M4

±0.3

120

±0.3

130.5 max.

Four, 4.5 dia. or M4

Four, R2.5

47.6

Four, M4M4-D10

M4-D10

120

130.5 max.

190.5 max.

70 max.

150

±0.3

120

±0.3

Four, 4.5 dia. or M4

Mounting Holes

Four, R2.5

G3PE

Safety Precautions

Refer to Safety Precautions for All Solid State Relays.

!CAUTION

Minor electrical shock may occasionally occur. Do not touch the G3PE terminal section (i.e., currentcarrying parts) while the power is being supplied. Also, always attach the cover terminal.

The G3PE may rupture if short-circuit current flows. As protection against accidents due to shortcircuiting, be sure to install protective devices, such as fuses and no-fuse breakers, on the power supply side.

Minor electrical shock may occasionally occur. Do not touch the main circuit terminals on the SSR immediately after the power supply has been turned OFF. Shock may result due to the electrical charge stored in the built-in snubber circuit.

Minor burns may occasionally occur. Do not touch the SSR or the heat sink while the power is being supplied or immediately after the power supply has been turned OFF. The SSR and heat sink become extremely hot.

OMRON constantly strives to improve quality and reliability. SSRs, however, use semiconductors, and semiconductors may commonly malfunction or fail. In particular, it may not be possible to ensure safety if the SSRs are used outside the rated ranges. Therefore, always use the SSRs within the ratings. When using an SSR, always design the system to ensure safety and prevent human accidents, fires, and social harm in the event of SSR failure. System design must include measures such as system redundancy, measures to prevent fires from spreading, and designs to prevent malfunction.

Transport

Do not transport the G3PE under the following conditions. Doing so may result in damage, malfunction, or deterioration of performance characteristics.

• Conditions in which the G3PE may be subject to water.

• Conditions in which the G3PE may be subject to high temperature

or high humidity.

• Conditions in which the G3PE is not packaged.

Operating and Storage Environments

Do not use or store the G3PE in the following locations. Doing so may result in damage, malfunction, or deterioration of performance characteristics.

• Locations subject to rainwater or water splashes.

• Locations subject to exposure to water, oil, or chemicals.

• Locations subject to high temperature or high humidity.

• Do not store in locations subject to ambient storage temperatures outside the range −30 to 100°C.

• Do not use in locations subject to relative humidity outside the

range 45% to 85%.

• Locations subject to corrosive gases.

• Locations subject to dust (especially iron dust) or salts.

• Locations subject to direct sunlight.

• Locations subject to shock or vibration.

Installation and Handling

• Do not block the movement of the air surrounding the G3PE or heat

sink. Abnormal heating of the G3PE may result in shorting failures of the output elements or burn damage.

• Do not use the G3PE if the heat radiation fins have been bent by

being dropped. Doing so may result in malfunction due to a reduction in the heat radiation performance.

• Do not handle the G3PE with oily or dusty (especially iron dust)

hands. Doing so may result in malfunction.

• Attach a heat sink or radiator when using an SSR. Not doing so

may result in malfunction due to a reduction in the heat radiation performance.

Installation and Mounting

• Mount the G3PE in the specified direction. Otherwise excessive

heat generated by the G3PE may cause short-circuit failures of the output elements or burn damage.

• Make sure that there is no excess ambient temperature rise due to

the heat generation of the G3PE. If the G3PE is mounted inside a panel, install a fan so that the interior of the panel is fully ventilated.

• Make sure the DIN track is securely mounted. Otherwise, the

G3PE may fall.

• When mounting the heat sink, do not allow any foreign matter

between the heat sink and the mounting surface. Foreign matter may cause malfunction due to a reduction in the heat radiation performance.

• If the G3PE is mounted directly in a control panel, use aluminum,

steel plating, or similar material with a low heat resistance as a substitute for a heat sink. Using the G3PE mounted in wood or other material with a high heat resistance may result in fire or burning due to heat generated by the G3PE.

Installation and Wiring

• Use wires that are suited to the load current. Otherwise, excessive

heat generated by the wires may cause burning.

• Do not use wires with a damaged outer covering.

Otherwise, it may result in electric shock or ground leakage.

• Do not wire any wiring in the same duct or conduit as power or

high-tension lines. Otherwise, inductive noise may damage the G3PE or cause it to malfunction.

• When tightening terminal screws, prevent any non-conducting

material from becoming caught between the screws and the tightening surface. Otherwise, excessive heat generated by the terminal may cause burning.

• Do not use the G3PE with loose terminal screws. Otherwise,

excessive heat generated by the wire may cause burning.

• For the G3PE models with a carry current of 35 A or larger, use M5

crimp terminals that are an appropriate size for the diameter of the wire.

• Always turn OFF the power supply before performing wiring. Not

doing so may cause electrical shock.

Installation and Usage

• Select a load within the rated values. Not doing so may result in

malfunction, failure, or burning.

• Select a power supply within the rated frequencies. Not doing so

may result in malfunction, failure, or burning.

• The G3PE provides a circuit to prevent photocoupler damage by

forcibly arcing the output element for surge voltages applied to the load. The G3PE therefore cannot be used for motor loads. Doing so may result in load motor malfunction.

Precautions for Safe Use

G3PE

The SSR in operation may cause an unexpected accident. Therefore it is necessary to test the SSR under the variety of conditions that are possible. As for the characteristics of the SSR, it is necessary to consider differences in characteristics between individual SSRs. The ratings in this catalog are tested values in a temperature range between 15°C and 30°C, a relative humidity range between 25% and 85%, and an atmospheric pressure range between 86 and 106 kPa. It will be necessary to provide the above conditions as well as the load conditions if the user wants to confirm the ratings of specific SSRs.

Causes of Failure

• Do not drop the G3PE or subject it to abnormal vibration or shock

during transportation or mounting. Doing so may result in deterioration of performance, malfunction, or failure.

• Tighten each terminal to the torque specified below. Improper

tightening may result in abnormal heat generation at the terminal, which may cause burning.

• Do not supply overvoltage to the input circuits or output circuits.

Doing so may result in failure or burning.

• Do not use or store the G3PE in the following conditions. Doing so

may result in deterioration of performance.

• Locations subject to static electricity or noise

• Locations subject to strong electric or magnetic fields

• Locations subject to radioactivity

Mounting

• The G3PE is heavy. Firmly mount the DIN Track and secure both

ends with End Plates for DIN Track mounting models. When

mounting the G3PE directly to a panel, firmly secure it to the panel. Screw diameter: M4 Tightening torque: 0.98 to 1.47 N·m

Note: Make sure that the load current is 50% of the rated load current

when the G3PE is mounted horizontally. For details on close mounting, refer to the related information under performance characteristics. Mount the G3PE in a direction so that the markings read naturally.

• The G3PE-2N/-3N (DIN Track mounting models) can be mounted

on the following TR35-15Fe (IEC 60715) DIN Tracks.

Wiring

• When using crimp terminals, refer to the terminal clearances

shown below.

• Make sure that all lead wires are thick enough for the current.

• For three-element and two-element models, the output terminal will

be charged even when the Relay is OFF. Touching the terminal may result in electric shock. To isolate the Relay from the power supply, install an appropriate circuit breaker between the power supply and the Relay. Always turn OFF the power supply before wiring the Unit.

• Terminal L2 and terminal T2 of a 2-element model are internally

connected to each other. Connect terminal L2 to the ground terminal of the power supply. If terminal L2 is connected to a terminal other than the ground terminal, cover all the charged terminals, such as heater terminals, to prevent electric shock and ground faults.

Fuses

• Use a quick-burning fuse on the output terminals to prevent

accidents due to short-circuiting. Use a fuse with equal or greater performance than those given in the following table.

Recommended Fuse Capacity

Precautions for Correct Use

Terminals Screw terminal diameter Tightening torque

Input terminals M3.5 0.59 to 1.18 N·m

Output

terminals

M4 0.98 to 1.47 N·m M5 1.57 to 2.45 N·m

Manufacturer Thickness 1.5 mm 2.3 mm Schneider AM1-DE200 ---

WAGO

210-114, 210-197

210-118

PHOENIX NS35/15 NS35/15-2.3

Panel

Vertical Direction

Mounted on a

vertical surface

Panel

Mounted on a

horizontal surface

Rated G3PE output

current

Applicable SSR

Fuse

(IEC 60269-4)

15 A G3PE@15B Series

32 A

25 A G3PE@25B Series 35 A G3PE@35B Series

63 A

45 A G3PE@45B Series

7 mm

13 mm

10 mm 13 mm

12 mm

M4 (15A, 25A) M5 (35A, 45A)

12.9 mm

12.4 mm

10 mm

7.0 mm

M3.5

15-A and 25-A Models 35-A and 45-A Models

M5 (35 A, 45 A)

M4 (15 A, 25 A)

Output Terminal Section for Three-phase Models

Output Terminal Section for Single-phase Models

Input Terminal Section

G3PE

EMC Connection

Make EMC connections according to the following figure.

• Connect a capacitor to the load power supply.

• The input cable must be no longer than 3 m.

EMI

This is a Class A product (for industrial environments). In a domestic environment, the G3PE may cause radio interference, in which case the user may be required to take appropriate measures.

Noise and Surge Effects

If noise or an electrical surge occurs that exceeds the malfunction withstand limit for the G3PE output circuit, the output will turn ON for a maximum of one half cycle to absorb the noise or surge. Confirm that turning the output ON for a half cycle will not cause a problem for the device or system in which the G3PE is being used prior to actual use. The G3PE malfunction withstand limit is shown below.

• Malfunction withstand limit (reference value): 500 V

Note: This value was measured under the following conditions.

Noise duration: 100 ns and 1 µs Repetition period: 100 Hz Noise application time: 3 min

Mounting Models with Externally Attached Heat Sinks

• Before attaching an external Heat Sink or Radiator to the Unit,

always apply silicone grease, such as Toshiba Silicone's YG6260 or Sinetsu Silicone's G746, to the mounting surface to enable proper heat radiation.

• Tighten the screws to the following torque to secure the Unit and

external Heat Sink or Radiator to enable proper heat dissipation.

Tightening torque: 2.0 N·m

Mounting to Control Panel

The G3PE is heavy. Firmly mount the DIN track and secure both ends with End Plates for DIN-track-mounting models. When mounting the G3PE directly to a panel, firmly secure it to the panel. If the panel is airtight, heat from the SSR will build up inside, which may reduce the current carry ability of the SSR or adversely affect other electrical devices. Be sure to install ventillation holes on the top and bottom of the panel.

SSR Mounting Pitch (Panel Mounting)

• Single-phase Model

• Three-phase Models

G3PE

Input Output

3 m max.

Load

Recommended Capacitor (Film Capacitor) G3PE-2@@B Series: 1 µF, 250 VAC G3PE-5@@B Series: 0.5 µF, 500 VAC

SSR

10 mm min.

30 mm min.

80 mm min.

60 mm min.

Duct or other object blocking airflow

Vertical Direction

Between duct and G3PE

Mounting direction

Host and slave

60 mm min.

30 mm min.

G3PE

G3PE G3PE

G3PE

80 mm min.

Duct or other object blocking airflow

Between duct and G3PE

Host and slave

G3PE

Relationship between the G3PE and Ducts or Other Objects Blocking Airflow

Ventilation Outside the Control Panel

Note: 1. If the air inlet or air outlet has a filter, clean the filter regularly

to prevent it from clogging to ensure an efficient flow of air.

2. Do not locate any objects around the air inlet or air outlet, otherwise the objects may obstruct the proper ventilation of the control panel.

3. A heat exchanger, if used, should be located in front of the G3PE to ensure the efficiency of the heat exchanger.

G3PE Ambient Temperature

The rated current of the G3PE is measured at an ambient temperature of 40°C. The G3PE uses a semiconductor to switch the load. This causes the temperature inside the control panel to increase due to heating resulting from the flow of electrical current through the load. The G3PE reliability can be increased by adding a ventilation fan to the control panel to dispel this heat, thus lowering the ambient temperature of the G3PE. (Arrhenius's law suggests that life expectancy is doubled by each 10°C reduction in ambient temperature.)

Example: For 10 G3PE SSRs with load currents of 15 A,

0.23 × 10 = 2.3 Thus, 3 fans would be required.

Note: 1. Size of fans: 92 mm × 92 mm, Air volume: 0.7 m

/min,

Ambient temperature of control panel: 30°C

2. If there are other instruments that generate heat in the control panel in addition to SSRs, more ventilation will be required.

3. Ambient temperature: The temperature that will allow the SSR to cool by convection or other means.

SSR rated current (A) 15 A 25 A 35 A 45 A

Required number of fans per SSR

0.23 0.39 0.54 0.70

Duct or other object blocking airflow

Duct

Duct Duct Duct

Vertical Direction

50 mm max.

Airflow

Base

SSR SSR

SSR

Incorrect Example Countermeasure 1 Countermeasure 2

Mounting surface

If the depth direction of the G3PE is obstructed by ducts, the heat radiation will be adversely affected.

(No more than 1/2 the SSR depth is recommended.)

Use ducts that have a shallow depth, to provide a sufficient ventilation area.

If the ducts cannot be made lower, place the G3PE on a metal base so that it is not surrounded by the ducts.

SSR

Air inlet

Be aware of airflow

Ventilation outlet (Axial Fan)

SSR

Duct or other object blocking airflow

G3PE

Warranty and Application Considerations

Read and Understand this Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE

PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products.

Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used.

Know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT

ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Disclaimers

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your OMRON representative at any time to confirm actual specifications of purchased product.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

G3PE

Authorized Distributor:

In the interest of product improvement, specifications are subject to change without notice.

Cat. No. J174-E1-01

OMRON Industrial Automation Global: www.ia.omron.com

Printed in Japan

0708 (0708)

OMRON Corporation

Industrial Automation Company

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69-2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388

OMRON ELECTRONICS LLC

One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Control Devices Division H.Q. Strategy Planning Division

Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81) 75-344-7109/Fax: (81) 75-344-7149

Omron G3PE-245B DC12-24, G3PE-215B DC12-24, G3PE-215BL DC12-24, G3PE-225BL DC12-24, G3PE-235BL DC12-24 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual