Omron G3NE-205T-US, G3NE-210T-2-US, G3NE-205T-2-US, G3NE-210T-US, G3NE-220T-US User Manual

Solid State Relays G3NE J-17

SSR

Solid State Relays

G3NE

Compact, Low-cost, SSR Switching 5 to 20 A

• Wide load voltage range: 75 to 264 VAC. Both 100-V and
200-V loads can be handled with the same model.

• Dedicated, compact aluminum PCB and power elements used.

• Built-in varistor effectively absorbs external surges.

• Quick-connect #110 input terminals and #250 output
connections. (#187 input terminals and #250 output
connections are available.)

• “-US” models certified by UL, CSA, and IEC/EN (TÜV).

Model Number Structure

■ Model Number Legend

1. Basic Model Name

G3NE: Solid State Relay

2. Rated Load Power Supply Voltage

2: 200 VAC

3. Rated Load Current

05: 5 A
10: 10 A
20: 20 A

4. Terminal Type

T: Quick-connect terminals

5. Zero Cross Function

Blank: Equipped with zero cross function
L: Not equipped with zero cross function

6. Special Specifications

Blank: Standard models
2: #187 input terminals

7. Certification

US: Certified by UL, CSA, and TÜV

1

234

5

67

G3NE-@@@@-@-@

J-18 Solid State Relays G3NE

Ordering Information

■ List of Models

Note: When ordering, specify the input voltage.

■ Accessories (Order Separately)

Heat Sinks

The following heat sinks are thin and can be DIN-track mounted.
See Dimensions for details.

Specifications

■ Ratings (at an Ambient Temperature of 25°C)

Input

Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions.

Output

Note: 1. The load current varies depending on the ambient temperature. Refer to Load Current vs. Ambient Temperature under Engineering Data

for details.

2. These values apply when using a dedicated heat sink or a radiation plate of specified size.

Isolation Zero cross

function

Indicator Rated output load Rated input voltage Model

Phototriac Yes No 5 A at 100 to 240 VAC 5, 12, 24 VDC G3NE-205T-US

G3NE-205T-2-US

10 A at 100 to 240 VAC G3NE-210T-US

G3NE-210T-2-US

20 A at 100 to 240 VAC G3NE-220T-US

G3NE-220T-2-US

No 5 A at 100 to 240 VAC G3NE-205TL-US

G3NE-205TL-2-US

10 A at 100 to 240 VAC G3NE-210TL-US

G3NE-210TL-2-US

20 A at 100 to 240 VAC G3NE-220TL-US

G3NE-220TL-2-US

Model Applicable SSR
Y92B-N50 G3NE-205T(L)(-2)-US/-210T(L)(-2)-US
Y92B-N100 G3NE-220T(L)(-2)-US

Rated voltage Operating voltage Voltage level Input impedance

Must operate Must release With zero cross function Without zero cross function

5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 250 Ω±20% 300 Ω±20%
12 VDC 9.6 to 14.4 VDC 9.6 VDC max. 600 Ω±20% 800 Ω±20%
24 VDC 19.2 to 28.8 VDC 19.2 VDC max. 1.6 kΩ±20%

Model Applicable load

Rated load voltage Load voltage range Load current

(See note 1.)

Inrush current

With heat sink Without heat sink
G3NE-205T(L)(-2)-US 100 to 240 VAC 75 to 264 VAC 0.1 to 5 A 0.1 to 5 A 60 A (60 Hz, 1 cycle)
G3NE-210T(L)(-2)-US 0.1 to 10 A

(See note 2.)

0.1 to 5 A 150 A (60 Hz, 1 cycle)

G3NE-220T(L)(-2)-US 0.1 to 20 A

(See note 2.)

0.1 to 5 A 220 A (60 Hz, 1 cycle)

Solid State Relays G3NE J-19

SSR

■ Characteristics

Engineering Data

Load Current vs. Ambient Temperature

One Cycle Surge Current: Non-repetitive

Note: Keep the inrush current to half the rated value if it occurs repetitively.

Item G3NE-2@@T(-2)-US G3NE-2@@TL(-2)-US

Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max.
Release time 1/2 of load power source cycle + 1 ms max.
Output ON voltage drop 1.6 V (RMS) max.
Leakage current 2 mA max. (at 100 VAC)

5 mA max. (at 200 VAC)

Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude
Shock resistance

Destruction: 1,000 m/s

2

Ambient temperature Operating: –30°C to 80°C (with no icing or condensation)

Storage: –30°C to 100°C (with no icing or condensation)

Ambient humidity Operating: 45% to 85%
Certified standards UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535

TÜV R9051064 (VDE0435) (EN60950)

Weight Approx. 37 g

G3NE-205T(L)(-2)-US G3NE-210T(L)(-2)-US G3NE-220T(L)(-2)-US

Ambient temperature (°C)

Ambient temperature (°C)

Ambient temperature (°C)

Load current (A)

Load current (A)

Load current (A)

Without heat sink

Without heat sink

Without heat sink

With standard heat sink (Y92B-N50)
or aluminum plate measuring 100 mm
x 100 mm x t2 mm (W x H x D)

With standard heat sink (Y92B-N100) or
aluminum plate measuring 300 mm x
300 mm x t3 mm (W x H x D)

G3NE-205T(L)(-2)-US G3NE-210T(L)(-2)-US G3NE-220T(L)(-2)-US

Inrush current (A. Peak)

Energized time (ms)

Inrush current (A. Peak)

Energized time (ms)

Inrush current (A. Peak)

Energized time (ms)

J-20 Solid State Relays G3NE

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Safety Precautions

■ Precautions for Correct Use

Please observe the following precautions to prevent failure to
operate, malfunction, or undesirable effect on product performance.

Do not apply excessive force to the terminals. Be careful when
pulling or inserting the terminal clips for the Quick Connector (QC).

When attaching a heat sink to the G3NE, in order to facilitate heat
dissipation, apply heat-conductive grease on the heat sink. Tighten
the mounting screws of the heat sink with a torque of 0.59 to

0.98 N·m.

30±0.2

3 +

4 −

1

2

14.5

6.5

7.1

2.9

7.95

3

6

30+0.5

G3NE-205T(L)/210T(L)/220T(L)(-2)-US

Mounting Holes

Two, 3.5-dia. or M3 holes

Output Load

Input

37.5 max.

3.5 dia. hole

11.5 max.

* G3NE-2@@T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent)

47.5
max.

Two #110 (t = 0.5) (Faston
tab or equivalent)*

Two #250 (t = 0.8) (Faston
tab or equivalent)

Terminal Arrangement/
Internal Connections
(Top View)

Input
voltage

Load power
supply

5.6

47.6

90±0.3

35 30.5±0.3

30

5

4.5

6

35±0.2

90±0.4

35

30.5±0.3

47.6

90±0.3

5.6

30

5 4.5

28

13

35±0.2

90±0.4

Mounting Holes

Y92B-N100

4.6 dia. hole

Two, M3 holes

Two, M4 holes

77 max.

100 max.

44 max. 47 max.

51 max.

4.6 dia. hole

Two, M3 holes

77 max.

100 max.

71 max.

100 max.

75 max.

Two, 3.2-dia. holes

Mounting Holes

Weight: approx. 200 g

Weight: approx. 400 g

Heat Sink
Y92B-N50

Two, 3.2-dia.
holes

Two, M4
holes

Two, 4.4-dia.
or M4 holes

Two, 4.4-dia.
or M4 holes

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. K062-E1-05