Omron F3ET2-005-150, F3ET2-005-300, F3ET2-018-150, F3ET2-018-300, F3ET2-005-450 Operation Manual
...
At the end of this document you will find links to products related to this catalog. You can go directly to our shop by
clicking HERE. HERE
Cat. No. E79E-EN-01
ZX-T Series
F3ET2
Detection Light Curtain
OPERATION MANUAL
Manufacturer: OMRON Europe B.V.
Wegalaan 67-69
2132 JD Hoofddorp, THE NETHERLANDS
WWW www.industrial.omron.eu
User‘s Manual: Version 0.2 dated 18-10-2011
Precautions
WARNING
The F3ET2 multi-beam photoelectric sensor with beam evaluation function is not a safety
component for ensuring the safety of people which is defined in EC directive (2006/42/EC) or
by any other regulations or standards.
GENERAL INFORMATION
The instructions in this manual must be followed in order to safeguard correct installation. The
barrier does not contain any parts that are subject to maintenance; do not remove any
electronic parts from the housing for any reason. In case of malfunction, please contact your
sales representative with a description of the failure found and its period of operation. Do not
touch the front protective cover with your hands as dust and/or grease may decrease
performance.
Precautions
OPERATING ENVIRONMENT
Do not use the light curtain in locations with explosive or flammable gas. Make sure that the
product is operated in accordance with IP65 standards. Do not subject the light curtain to
excessive shock when mounting. When using the light curtain in the vicinity of an inverter
motor, be sure to connect the protective earth ground wire of the motor to earth. Failure to
ground the motor may result in malfunction of the light curtain. Further it is recommended to
use shielded cables and to connect the shield to the ground in such cases.
CLEANING
When cleaning the front covers please do not use woollen cloths or organic solvents. The
interval between cleaning depends on conditions in the environment (dust, fog).
POWER SUPPLY VOLTAGE AND OUTPUT LOAD
Do not connect an AC power supply to the Sensor. If AC power (100 VAC or more) is supplied
to the Sensor, it may explode or burn. Make sure that the power supply to the Sensor is within
the rated voltage range. If a voltage exceeding the rated voltage range is supplied to the
Sensor, it may explode or burn.
F3ET2 LIGHT CURTAINS OPERATION MANUAL
1
Table Of Contents
Precautions ........................................................................................... 1
Chapter 1 Overview
Chapter 2 Installation
2-1 General...................................................................................................2-2
2-2 Mechanical installation ...........................................................................2-3
2-3 Operating environment ...........................................................................2-4
2-4 Operating distances................................................................................2-4
2-5 Wiring & output circuit.............................................................................2-5
2-6 Setting the internal selector-switches .....................................................2-6
Chapter 3 Order codes
Chapter 4 Technical specifications
4-1 Ratings ...................................................................................................4-2
Chapter 5 LED indicators and error indication
5-1 LED indication on receiver unit...............................................................5-2
5-2 LED indication on emitter unit.................................................................5-3
5-3 Troubleshooting for error indication........................................................5-4
Chapter 6 Dimensions
Chapter 7 Accessories
7-1 Mounting bracket ....................................................................................7-2
7-2 Cables ....................................................................................................7-2
Manual Revision History .............................................................................. 1
F3ET2 LIGHT CURTAINS OPERATION MANUAL
3
4
Overview
F3ET2 is a multi-beam light curtain for easy area detection for various applications. Due to its
robust housing F3ET2 is also suitable for hash environments in industrial automation.
F3ET2 is provided with PNP and NPN transistor output.
F3ET2 is available in two resolutions:
Model Sensing distance Pitch resolution Min. detectable object
F3ET2-005-[…] 0 to 3 m 5 mm 10 mm
F3ET2-018-[…] 0 to 15 m 18 mm 30 mm
Models with 7.5 mm resolution are available upon request.
Due to its modular design F3ET2 can be provided in various sizes. For standard sizes please
refer to model list in chapter 3.
1
F3ET2 LIGHT CURTAINS OPERATION MANUAL
Installation
2-1 General ..........................................................................2-2
2-2 Mechanical installation ................................................2-3
Mounting accessories ..................................................................... 2-3
Additional mounting rigidity ............................................................. 2-3
Mechanical Mounting ...................................................................... 2-4
2-3 Operating environment ................................................2-4
2-4 Operating distances .....................................................2-4
2-5 Wiring & output circuit .................................................2-5
2-6 Setting the internal selector-switches........................2-6
2
F3ET2 LIGHT CURTAINS OPERATION MANUAL
Loading...