Omron F3E-16-T1 5M, F3E-16-T6, F3E-46-T1 5M, F3E-46-T6 Datasheet
Ultra-flat multi-beam sensor for elevators
K
F3E
• Ultra-flat 9 mm shape for easy design-in in
elevator constructions
• Highest ambient light immunity
(200,000 lux) for installations with direct
sunlight exposition
• Triple crossing resolution maintained
close to zero distance
• Robust aluminum housing
• Ray failure toleration
• Test input
• Built-in amplifier
(operation with 10-30 VDC)
• Fulfills requirements of EN81-70
Designed & manufactured
by
STRAC
LIFT AUTOMATION
Ordering Information
Pitch Detection area channels
120 mm 1800 mm 16 46 5 m pre-wired potential-
40 mm 1800 mm 46 136 5 m pre-wired F3E-46-T1 5M
Number of
optical axis
Connection Output Model number
F3E-16-T1 5M
M8 Connector (4-pin) F3E-16-T6
M8 Connector (4-pin) F3E-46-T6
free output
Features
High reliability and flexibility:
Test input: Function of multi-beam sensor can be tested by transmitter cut off on test signal. A subsequent receiver cut off can be
monitored by control unit.
Ray failure toleration: As soon as one channel is not switching for more than 60 seconds, the F3E identifies a defect and deactivates this channel. The sensor then functions normally again showing the defect channel by a red error LED.
Easy parameterization: By test input of transmitter a parameterization of L-ON/D-ON operation and shading of LED areas is possible. No complicated programming or remote control needed
Potential free output: The F3E provides a wear-free electronic relay output for highest connection flexibility and life-time.
1F3E Multibeam sensor
A/2
A/3 A/3
B
C
D
C
High resolution is realized by triple crossing of light
beams.
Automatic sensitivity control ensures steady and op-
timum light power. Even when sensors are operated
in dirty environment or at highest distances, no adjustment is necessary. Sensitivity control ensures
that the high resolution is maintained at small distances close to "zero".
Min. size of recognized objects:
Pitch B D C
120 mm 125 mm 65 mm 45 mm
40 mm 45 mm 35 mm 18 mm
protected area
A = current scanning radius
Rating/Specifications
ItemType F3E-16-T[..] F3E-46-T[..]
Rated sensing distance 0-5 m
Number LEDs 16 46
Number of optical axis 46 136
Resolution 120 mm 40 mm
Vertical detection area
Response time max. 110ms (signal interruption)
Light source (wave length) Infrared LED (880 nm)
Power supply voltage 10-30 VDC
Current consumption max. 120 mA / pair max. 240 mA / pair
Control output Wearless potential free output, 35 V AC/DC max., 150mA max. at 20°C, 100mA max.
Test input / light emission stop function 110 ms max. response time
Ambient light immunity
Ambient temperature -20…+60°C (operation)
EMC conformity/standards 73/23/EWG; 89/336/EWG; 95/16/EG; EN81-1; EN81-2; EN12015; EN12016;
Protective degree IP54
Connection methods Pre-wire type (5 m PVC cable), M8-4-PIN
Indicator LEDs Emitter: power indicator (yellow);
Error status indication Red LED blinking: unstable operation, contamination, max. exceeding sensing dis-
Dimension
1
Weight 880g (connector version), 1040g (cable version)
Material Case Aluminum
1
other sizes available on request
2
Measured at angle of 20°
3
No icing and condensation
1
20-1820 mm
at 60°C, D-ON (parameterization by emitter test input), max. leakage at open contact
0,001mA, contact resistance 4/12 Ohm
2
200.000 lux
EN61000-6-x
Receiver: output indicator (yellow), output indicator (red)
tance
Red LED ON + yellow LED ON: beam channel defect
2070x40,7x9 mm 2000x40,7x9 mm
Cable PVC
3
, -40…+70 (storage)
2 F3E Multibeam sensor
Loading...