Omron F3C-AL14-M1J, F3C-AL44-M1J Datasheet
F3C-AL
A-177F3C-AL
Distance setting laser photoelectric sensor
F3C-AL
• 700 mm max setting distance
• small visible Laser light spot for simple
adjustment
Features
Clear red spot ensures easy setting.
With its wide setting range 170 to 700 mm, F3C-AL is compatible with standard conveyors. In the setting distance of 700
mm, the distance can be set easily with a 1.5x4 mm red spot.
Secure detection of shiny surface
Ensures stable detection of a 45-degree shiny surface. Detection of pouches, laminated packages or like minimizes setup
change time.
Unaffected by a shiny background.
Insensitive to shiny objects in the background, the Sensor can
be installed in any place.
Small Black/White error:
2% (Setting distance 300 mm),
8% max. (Setting distance 500 mm)
A little black/white error saves adjustment time during setup
change.
Full hysteresis detection range 0.5% max.
(for white paper)
6-turn adjuster ensures ease of adjustment.
700mm
170mm
A-178 Standard Photoelectric Sensors
Application
Ordering Information
Sensors
Accessories (Order Separately)
Shape
Connection
method
Sensing/Setting range Operating mode
Model
NPN output PNP output
Pre-wired with
M12-connector
Light-ON/Dark-ON cable
connection selectable
F3C-AL14-M1J
F3C-AL44-M1J
Detection of the object
between 150 to 700 mm max.
on the conveyor.
F3C
The cup of yogurt
Detection of food being transferred
Since it is a reflection
type, a viewport is
OK with one place!
F3C
Wafer
Detection of wafers through view port
(Reflective model)
Red light
120 170
Setting range
120 to 700 mm
Sensing distance
700 mm
Mounting Brackets
Shape Model Quantity
E39-L40 1
Sensor I/O Connectors
Cable spec-
ifications
Shape
Cable type
Model
Standard
cable
2 m
4 con-
ductors
XS2F-D421-D80-A
5 m
XS2F-D421-G80-A
2 m
XS2F-D422-D80-A
5 m
XS2F-D422-G80-A
Robot cable
(for vibration resis-
tance)
2 m
XS2F-D421-D80-R
5 m
XS2F-D421-G80-R
2 m
XS2F-D422-D80-R
5 m
XS2F-D422-G80-R
Straight
t
yp
e
L type
Straight
type
L type
A-179F3C-AL
F3C-AL
Rating/Performance
Item Model F3C-AL14-M1J F3C-AL44-M1J
Sensing 120 to 700 mm (White paper 100 x 100 mm) (Setting distance 700 mm)
Setting distance range
170 to 700 mm (White paper, 90% remission, 100 x 100 mm)
170 to 560 mm (White paper, 6% remission, 100 x 100 mm)
Black-/white-error 20% max. (of setting distance, 90%/6% remission)
Spot Diameter 1.5 x 4 mm (Setting distance 700 mm)
Light source
Pulsed red light semiconductor laser
Class II: < 1mWeff. / 670 nm / 5% duty cycle
(Impulse time 60 µs, Period time: 1.2 ms)
Power supply voltage 10 to 30 VDC [ripple (p-p) 10% included]
Current consumption 30 mA max.
Control output
Load supply voltage 30 VDC max., load
current 150 mA max. (residual voltage: 2 V max.)
NPN open collector output type, Light-ON/Dark-ON
cable connection selectable
Load supply voltage 30 VDC max., load
current 150 mA max. (residual voltage: 2 V max.)
PNP open collector output type, Light-ON/Dark-ON
cable connection selectable
Protective circuits Reverse polarity protection, output short-circuit protection, mutual interference prevention
Response time Operation and reset: 10 ms max.
Sensitivity adjustment 6-turn adjuster
Ambient illuminance Incandescent lamp/Sunlight: 5,000 lux max.
Ambient temperature Operating: 0°C to 50°C, Storage: -25°C to 60°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 85%RH (with no condensation)
Insulation resistance 20 M min. at 500 VDC
Vibration resistance 10 to 55 Hz double amplitude 1.5 mm or 300 m/s2 for 2 h in each of X, Y, Z directions
Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Protective structure IEC Standard IP40
Connection method M12 connector joint type (standard cable length 200 mm) / 4 x 0.34 mm² (PVC)
Weight (packed state) Approx. 80 g
Material
Case
ABS
Lens Acrylics (PMMA)
Accessories Adjusting screwdriver, Laser warning label, instruction manual
Loading...