Omron E3S-CT61-M1J, E3S-CT11, E3S-CR11, E3S-CR11-M1J, E3S-CR61 Datasheet
...
Oil-resistive, compact photoelectric sensor in metal housing
E3S-C
E3S-C
Features
Meets IP67/IP67G (oil tight) and NEMA 6P
standards water/oil resistance
E3S-C meets the IP67 requirements of the IEC standards and
6P of the NEMA standards. E3S-C can be used worry-free in
automotive assembly lines and other production lines where
oil vapor exists. It can also be applied to food processing lines
because it resists hydrogen peroxide, detergent and potassium hydroxide.
High shock resistance of 1,000 m/s
The industry's top-class photoelectric sensor features shock resistance of 1,000 m/s
sor at rated values, and vibration resistance of as high as 10 to
2,000 Hz.
2
, which is as high as that of a proximity sen-
2
Lineup of M12 metal connector joint type models
Lineup of water/oil/shock-resistant M12 metal connector joint
type models are available. This series ensures ease of sensor
replacement during maintenance.
NPN/PNP output selector
The operation panel has the NPN/PNP output selector. You need not prepare two
NPN and PNP models for export. You need
not worry about malfunctions due to noise,
either.
Mutual interference prevention enhanced
(Retroreflective, diffuse reflective models)
Fuzzy inference is introduced into the mutual interference prevention for the first time in the industry. This prevents a malfunction due to mutual interference, enabling two sensors to
be mounted closely side by side.
Easy optical axis alignment
OMRON's original "automatic position compensation system"
minimizes misalignment of mechanical and optical axes to
merely ±2°. The optical axis is aligned perfectly by only installing the sensor.
A-101E3S-C
Application
Drill breakage detection
Detection of engine block
IP67 ensures a worry-free use in oil
mist environment.
Ordering Information
Sensors
Sensor type Shape Connection method Sensing distance Model
Horizontal Model
Through-beam
Vertical Model
Pre-wired E3S-CT11
Junction connector E3S-CT11-M1J
Plug-in connector E3S-CT16
30m
Pre-wired E3S-CT61
Junction connector E3S-CT61-M1J
Plug-in connector E3S-CT66
Red light Infrared light
Horizontal Model
Retroreflective Models
Vertical Model
Horizontal Model
Diffuse-reflective
Vertical Model
Accessories (Order Separately)
Slits
Slit width
Width 0.5 mmx11 mm
Width 1 mmx11 mm
Width 2 mmx11 mm
Width 4 mmx11 mm
Sensing
distance
1.8 m
3.5 m
7 m
15 m
Pre-wired E3S-CR11
Junction connector E3S-CR11-M1J
Plug-in connector E3S-CR16
Pre-wired E3S-CR61
Junction connector E3S-CR61-M1J
Plug-in connector E3S-CR66
Pre-wired
Junction connector
Plug-in connector
Pre-wired
Junction connector
Plug-in connector
Minimum sensing
object (typical)
0.5 mm dia.
1 mm dia.
2 mm dia.
2.6 mm dia.
3m
700mm
2m
700mm
2m
700mm
2m
700mm
2m
700mm
2m
700mm
2m
Model Quantity Remarks
E39-S61
1 each for emitter
and receiver
(total of 8 pcs.)
(Plug-in type long slit) Can be used
with through-beam E3S-CT#1
(-M1J).
E3S-CD11
E3S-CD12
E3S-CD11-M1J
E3S-CD12-M1J
E3S-CD16
E3S-CD17
E3S-CD61
E3S-CD62
E3S-CD61-M1J
E3S-CD62-M1J
E3S-CD66
E3S-CD67
A-102 Standard Photoelectric Sensors
Reflectors
Name Sensing distance (typical) Model Quantity Remarks
Reflectors
3 m (rated value) E39-R1 1 Attached to the Retroreflective E3S-CR#1 (-M1J).
4 m E39-R2 1 ---
Small reflector
1.5 m E39-R3 1 ---
750 mm E39-R4 1 ---
700 mm (50 mm) * E39-RS1 1 pc.
Tape Reflector
The M.S.R. function is available.1,100 mm (100 mm) * E39-RS2 1 pc.
1,400 mm (100 mm) * E39-RS3 1 pc.
* Values in parentheses indicate the minimum required distance between the sensor and reflector.
Note: 1 .When the reflector used is other than the supplied one, set the sensing distance to about 0.7 times of the typical example as a guideline.
Mounting Brackets
Shape Model Quantity Remarks
E39-L102 1 Attached to the horizontal model.
E39-L103 1 Attached to the vertical model.
Mounting bracket designed to switch from
E39-L85 1
E3S-#####42, 44 to the vertical model of
E3S-C.
E3S-C
E39-L86 1
E3S-#####43 to the vertical model of E3SC.
E39-L87 1 ---
Mounting bracket designed to switch from
Note: If a through-beam model is used, order two Mounting Brackets for the emitter and receiver respectively.
Sensor I/O Connectors
Cable Shape Cable length Model
Straight
Standard cable
L-shaped
2 m
5 m
2 m
3-wire type
5 m
XS2F-D421-DC0-A
XS2F-D421-GC0-A
XS2F-D422-DC0-A
XS2F-D422-GC0-A
A-103E3S-C
Loading...