Connector Models
DC 3-wire and AC 2-wire, DC 2-wire with self-diagnosis output,
DC 2-wire with old pin arrangement (polarity)
Connector Models
DC 2-wire with IEC pin arrangement (polarity)
Pre-wired Connector Models
DC 3-wire and AC 2-wire, DC 2-wire with IEC pin arrangement
(polarity), DC 3-wire and AC 2-wire, DC 2-wire with self-diagnosis output, DC 2-wire with old pin arrangement (polarity)
Pre-wired Connector Models
DC 2-wire with IEC pin arrangement (polarity)
Pre-wired Smartclick Connector Models
DC 2-wire with IEC pin arrangement (no polarity)
Pre-wired Smartclick Connector Models
DC 2-wire with IEC pin arrangement (polarity)
New model (Applies only to DC 2-wire pre-wired and shielded
models.)
Cable length (Unit: m) (Applicable to Pre-wired Models and Prewired Connector Models.)
R6: 0.6 mm
1R5: 1.5 mm
Whether D models have
polarity is defined by number J.
Used to prevent mutual interference.
This is blank if the cable
specification in number K
is R or U.
Example:
2M
0.3M
6
Ordering Information
2-Wire Models
Shielded DC 2-wire Models with No Self-diagnostic Output [Refer to Dimensions on page 29.]
E2E
Appear-
ance
M8
M12
M18
M30
*1. Models with different frequencies are also available. The model number is E2E-X @D15 (example: E2E-X3D15-N 2M).
*2. Models with a flexible cable are also available. Add "-R" rather than "-N" to the end of the model number (example: E2E-X2D1-R 2M).
*3. The standard stock includes models with a cable length of 5 m. Specify the cable length at the end of the model number. (Example: E2E-X3D1-N 5M)
*4. Refer to page 24 for details.
*5. The residual voltage for models without polarity is 5 V, so use caution concerning the connection load interface conditions (e.g., PLC ON voltage). Refer to page 28.
*6. The standard cable length is 300 mm. Cables with a length of 500 mm and 1 m can also be manufactured.
Unshielded DC 2-Wire Models with No Self-diagnosis Output [Refer to Dimensions on page 29.]
E2E
Appear-
ance
M8
M12
M18
M30
*1. Models with different frequencies are also available. The model number is E2E-X @D15 (example: E2E-X8MD15 2M).
*2. Models with a flexible cable are also available. Add -R to the end of the model number. (example: E2E-X4MD1-R 2M).
*3. The standard stock includes models with a cable length of 5 m. Specify the cable length at the end of the model number. (Example: E2E-X4MD1 5M)
*4. Refer to page 24 for details.
Shielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 29.]
Appear-
ance
M12
M18
M30
*1. Models with different frequencies are also available. The model number is E2E-X @D15S (example: E2E-X3D15S 2M).
*2. Refer to page 24 for details.
Sensing distance
3 mm
7 mm
10 mm
Connection
method
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Cable
specifications
PVC (oil-resistant)
---
PVC (oil-resistant)------E2E-X7D1S 2M *1
---
PVC (oil-resistant)------E2E-X10D1S 2M *1
---
Polar-
ity
Yes
Opera-
tion
mode
2: +V and diagnostic output
3: 0 V
4: +V and control output
NO
2: +V and diagnostic output
3: 0 V
4: +V and control output
2: +V and diagnostic output
3: 0 V
4: +V and control output
Pin
arrangement
------E2E-X3D1S 2M *1
Applicable
connector
code *2
DE2E-X3D1S-M1
DE2E-X7D1S-M1
DE2E-X10D1S-M1
Model
8
2-Wire Models
Unshielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 29.]
E2E
Appear-
ance
M12
M18
M30
*1. Models with different frequencies are also available. The model number is E2E-X @MD15S (example: E2E-X8MD15S 2M).
*2. Refer to page 24 for details.
Sensing distance
8 mm
14 mm
20 mm
Connection
method
Pre-wired Models (2 m)
M12 Connector
Models
Pre-wired Models (2 m)
M12 Connector
Models
Pre-wired Models (2 m)
M12 Connector
Models
Cable
specifications
PVC (oil-resistant)
---
PVC (oil-resistant)------E2E-X14MD1S 2M *
---
PVC (oil-resistant)------E2E-X20MD1S 2M *
---
Polar-
ity
Yes
Opera-
tion
mode
2: +V and diagnostic output
3: 0 V
4: +V and control output
NO
2: +V and diagnostic output
3: 0 V
4: +V and control output
2: +V and diagnostic output
3: 0 V
4: +V and control output
Pin
arrangement
------E2E-X8MD1S 2M *
Connector Pin Assignments of DC 2-Wire Models
• The connector pin assignments of each New E2E DC 2-Wire Model
conform to IEC 947-5-2 Table III. (Only DC 2-Wire Models have
been changed in comparison to the previous models.)
• The following models with conventional connector pin assignments
are available as well. (Only NO Models can be used.)
The cable at the right should also be used if the XW3A-P@45-G11
Connector Junction Box is already being used.
Cable lengthModel
500 mmXS2W-D421-BY1
Internal Wiring
(Proximity Sensor end)(Wired end)
1
4
Models with conventional connector pin assignments are available as well.
AC 2-Wire Models Shielded Models [Refer to Dimensions on page 29.]
E2E
Appear-
ance
M8
M12
M18
M30
*1. Models with different frequencies are also available. The model number is E2E-X @Y@5 (example: E2E-X5Y15 2M).
*2. The standard stock includes models with a cable length of 5 m. Specify the cable length at the end of the model number. (Example: E2E-X2Y1 5M)
*3. Refer to page 24 for details.
Sensing distance
1.5 mm
2 mm
5 mm
10 mm
Connection
method
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Cable
specifications
PVC (oil-resistant)
PVC (oil-resistant)
---
PVC (oil-resistant)
---
PVC (oil-resistant)
---
Operation
mode
NO
NCE2E-X1R5Y2 2M
NO
NCE2E-X2Y2 2M
NO(3, 4): (AC, AC)EE2E-X2Y1-M1
NC(1, 2): (AC, AC)FE2E-X2Y2-M1
NO
NCE2E-X5Y2 2M
NO(3, 4): (AC, AC)EE2E-X5Y1-M1
NC(1, 2): (AC, AC)FE2E-X5Y2-M1
NO
NCE2E-X10Y2 2M
NO(3, 4): (AC, AC)EE2E-X10Y1-M1
NC(1, 2): (AC, AC)FE2E-X10Y2-M1
Pin
arrangement
------
------
------
------
Applicable con-
nector code *3
E2E-X1R5Y1 2M
E2E-X2Y1 2M *1*2
E2E-X5Y1 2M *1*2
E2E-X10Y1 2M *1*2
Model
Unshielded Models
Appear-
ance
M8
M12
M18
M30
*1. Models with different frequencies are also available. The model number is E2E-X @MY@5 (example: E2E-X5MY15 2M).
*2. The standard stock includes models with a cable length of 5 m. Specify the cable length at the end of the model number. (Example: E2E-X5MY1 5M)
*3. Refer to page 24 for details.
Sensing distance
2 mm
5 mm
10 mm
18 mm
Connection
method
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Cable
specifications
PVC (oil-resistant)
PVC (oil-resistant)
---
PVC (oil-resistant)
---
PVC (oil-resistant)
---
Operation
mode
NO
NCE2E-X2MY2 2M
NO
NCE2E-X5MY2 2M
NO(3, 4): (AC, AC)EE2E-X5MY1 2M
NC(1, 2): (AC, AC)FE2E-X5MY2-M1
NO
NCE2E-X10MY2 2M
NO(3, 4): (AC, AC)EE2E-X10MY1-M1
NC(1, 2): (AC, AC)FE2E-X10MY2-M1
NO
NCE2E-X18MY2 2M
NO(3, 4): (AC, AC)EE2E-X18MY1-M1
NC(1, 2): (AC, AC)FE2E-X18MY2-M1
Pin
arrangement
------
------
------
------
Applicable con-
nector code *3
E2E-X2MY1 2M
E2E-X5MY1 2M *1*2
E2E-X10MY1 2M *1
E2E-X18MY1 2M *1
Model
AC 2-Wire Models Shielded Models [Refer to Dimensions on page 29.]
(There are no unshielded models.)
Appear-
ance
M12
M18
M30
Note: Not compliant with CE.
* The standard stock includes models with a cable length of 5 m. Specify the cable length at the end of the model number. (Example: E2E-X7T1 5M)
Sensing distance
3 mm
7 mm
10 mm
Connection
method
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
Cable
specifications
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
Operation
mode
NO
Pin
arrangement
------E2E-X3T1 2M
------E2E-X7T1 2M *
------E2E-X10T1 2M
Applicable con-
nector code *3
Model
10
3-Wire Models
Shielded DC 3-Wire Models [Refer to Dimensions on page 29.]
E2E
Appear-
ance
3 dia.
4 dia.
M5
5.4 dia.
M8
M12
M18
M30
*1. The standard stock includes models with a cable length of 5 m. Specify the cable length at the end of the model number. (Example: E2E-X2E1 5M)
*2. Models with a flexible cable are also available. Add -R to the end of the model number. (example: E2E-X5E1-R 2M).
*3. Models with different frequencies are also available. The model number is E2E-X@@@5 (example: E2E-X5E15 2M).
*4. Refer to page 24 for details.
Sensing distance
0.6 mm
0.8 mm
1 mm
1 mm
1.5 mm
2 mm
5 mm
10 mm
Connection
method
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
Pre-wired Models
(2 m)
M12 Connector
Models
M8 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Pre-wired Models
(2 m)
M12 Connector
Models
Cable
specifica-
tions
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
PVC (oil-resistant)
Opera-
tion
mode
NO
NCE2E-CR6C2 2ME2E-CR6B2 2M
NO
NCE2E-CR8C2 2ME2E-CR8B2 2M
NO
NCE2E-X1C2 2ME2E-X1B2 2M
NO
NCE2E-C1C2 2ME2E-C1B2 2M
NO
NCE2E-X1R5E2 2ME2E-X1R5F2 2M
---
---
---
---
---
NO
NC
NO
NC
NO
NCE2E-X2E2 2ME2E-X2F2 2M
NO
NC
NO
NCE2E-X5E2 2ME2E-X5F2 2M
NO
NC
NO
NCE2E-X10E2 2ME2E-X10F2 2M
NO
NC
Pin
arrangement
------
------
------
------
------
1: +V, 3: 0 V,
4: Control output
1: +V, 3: 0 V,
2: Control output
1: +V, 3: 0 V,
4: Control output
1: +V, 3: 0 V,
2: Control output
------
1: +V, 3: 0 V,
4: Control output
1: +V, 3: 0 V,
2: Control output
------
1: +V, 3: 0 V,
4: Control output
1: +V, 3: 0 V,
2: Control output
------
1: +V, 3: 0 V,
4: Control output
1: +V, 3: 0 V,
2: Control output
Appli-
cable
connector code
*5
B
DE2E-X1R5E2-M1E2E-X1R5F2-M1
I
B
DE2E-X2E2-M1E2E-X2F2-M1
B
DE2E-X5E2-M1E2E-X5F2-M1
B
DE2E-X10E2-M1E2E-X10F2-M1
NPN outputPNP output
E2E-CR6C1 2ME2E-CR6B1 2M
E2E-CR8C1 2M *1*2E2E-CR8B1 2M *2
E2E-X1C1 2M *1*2E2E-X1B1 2M *2
E2E-C1C1 2M *1*2E2E-C1B1 2M
E2E-X1R5E1 2M *1*2 E2E-X1R5F1 2M *1*2
E2E-X1R5E1-M1E2E-X1R5F1-M1
E2E-X1R5E1-M3E2E-X1R5F1-M3
E2E-X1R5E2-M3E2E-X1R5F2-M3
E2E-X2E1 2M *1*2*3E2E-X2F1 2M *1*2*3
E2E-X2E1-M1E2E-X2F1-M1
E2E-X5E1 2M *1*2*3E2E-X5F1 2M *1*2*3
E2E-X5E1-M1E2E-X5F1-M1
E2E-X10E1 2M *1*2*3 E2E-X10F1 2M *2
E2E-X10E1-M1E2E-X10F1-M1
Model
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.