Omron E2F-X5Y1, E2F-X10Y1, E2F-X1R5Y2, E2F-X2Y2, E2F-X5Y2 Datasheet

E2E-@Y/E2F-@Y 1

Cylindrical Inductive Sensor for AC Power Supply

E2E-@Y/E2F-@Y

• 24 to 240 VAC power supply voltage

• brass or plastic housing
(M8 in SUS housing)

Ordering Information

Plastic Housing

AC 2-wire/Pre-wired Models

Metal Housing

AC 2-wire/Pre-wired Models

AC 2-wire/Connector Models

Size Sensing

distance

Model

Operating status

NO NC

Shielded M8 1.5 mm

E2F-X1R5Y1

*1

*1. A different frequency type is available (E2F-X@@5; e.g. E2F-X5E15)

E2F-X1R5Y2

*1

M12 2 mm

E2F-X1Y1

*1

E2F-X2Y2

*1

M18 5 mm

E2F-X5Y1

*1*2

E2F-X5Y2

*1*2

M30 10 mm

E2F-X10Y1

*1*2

E2F-X10Y2

*1*2

*2. A short-circuit protection type is available (E2F-X@Y@-53;

e.g. E2F-X5Y1-53) Power Supply Voltage: 100 to 120 VAC

Size Sensing

distance

Operation

mode

Model

Shielded M8 1.5 mm NO E2E-X1R5Y1

NC E2E-X1R5Y2

M12 2 mm NO

E2E-X2Y1

*1*2

*1. Models with a different frequency are also available. These models are

E2E-X@Y@5 (e.g., E2E-X5Y15).

*2. Cables with a length of 5 m are also available. Specify the cable length at

the end of the model number (e.g., E2E-X2Y1 5M).

NC E2E-X2Y2

M18 5 mm NO

E2E-X5Y1

*1*2

NC E2E-X5Y2

M30 10 mm NO

E2E-X10Y1

*1*2

NC E2E-X10Y2

Un­shielded

M8 2 mm NO E2E-X2MY1

NC E2E-X2MY2

M12 5 mm NO

E2E-X5MY1

*1*2

NC E2E-X5MY2

M18 10 mm NO

E2E-X10MY1

*1

NC E2E-X10MY2

M30 18 mm NO

E2E-X18MY1

*1

NC E2E-X18MY2

Size Sensing

distance

Operation

mode

Model

Shielded M12 2 mm NO E2E-X2Y1-M1

NC E2E-X2Y2-M1

M18 5 mm NO E2E-X5Y1-M1

NC E2E-X5Y2-M1

M30 10 mm NO E2E-X10Y1-M1

NC E2E-X10Y2-M1

Un­shielded

M12 5 mm NO E2E-X5MY1-M1

NC E2E-X5MY2-M1

M18 10 mm NO E2E-X10MY1-M1

NC E2E-X10MY2-M1

M30 18 mm NO E2E-X18MY1-M1

NC E2E-X18MY2-M1

2 Cylindrical Inductive Sensor for AC Power Supply

Specifications

Plastic Housing (E2F)

Model

E2F-X1R5Y@ E2F-X2Y@ E2F-X5Y@ E2F-X10Y@

Sensing distance 1.5 mm ±10% 2 mm ±10% 5 mm ±10% 10 mm ±10%

Setting distance 0 to 1.2 mm 0 to 1.6 mm 0 to 4 mm 0 to 8 mm

Differential distance 10% max

Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals)

Standard sensing object Iron, 8 x 8 x 1 mm Iron, 12 x 12 x 1 mm Iron, 18 x 18 x 1 mm Iron, 30 x 30 x 1 mm

Response frequency

*1

*1. The response frequencies are average values measured on condition that the distance between each sensing object is twice as large as the size of the sensing

object and the sensing distance set is half of the maximum sensing distance.

25 Hz

Power supply
(Operating voltage
range)

24 to 240 VAC (20 to 264 VAC)

Leakage current 1.7 mA at 200 VAC

Control
output

Switching
capacity

5 to 100 mA 5 to 300 mA

Residual
voltage

Refer to the Specifications

Indicator lamp Operation indicator (red LED)

Operation status
(with sensing object
approaching)

Y1 Models: ON
Y2 Models: NC

Protection circuit

None

*2

*2. Short circuit protection types are available.

Ambient temperature Operating/Storage: –25 °C to 70 °C (with no icing or condensation)

Ambient humidity Operating/Storage: 35% to 95% RH

Temperature influence A maximim fluctuation of ±10% max. of sensing distance at 23 °C in the temperature range of –25 °C to 70 °C

Voltage influence ±1% max. of sensing distance within a range of ±10% of rated power supply voltage

Insulation resistance 50 MΩ min. (at 500 VDC) between current carry parts and case

Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 1,000 m/s

2

for 10 times each in X, Y, and Z directions

Protective structure

IEC IP68

*3

*3. OMRON test method

Conditions: Less than 10 m natural state under water
(1) It is not flooded underwater with two atmospheric pressure for 1 hour.
(2) A heat shock cycle (it is 1 hour, respectively to 0 °C cold water and 70 °C warm water) is repeated 20 times, and the performance of detection distance and
insulation resistance is checked.

Connection method Pre-wired models (standard length 2 m)

Weight (Packed state) Approx. 40 g Approx. 50 g Approx. 130 g Approx. 170 g

Material Case Polyarylate

Sensing
surface

Clamping
nut

Polyarylate resin

Accessories Instruction manual

3E2E-@Y/E2F-@Y

Metal Housing (E2E)

Size M8 M12 M18 M30

Type Shielded

Unshielded

Shielded

Unshielded

Shielded

Unshielded

Shielded

Unshielded

Item

E2E-X1R5Y@

E2E-X2MY@ E2E-X2Y@ E2E-X5MY@ E2E-X5Y@

E2E-X10MY@

E2E-X10Y@

E2E-X18MY@

Sensing distance 1.5 mm ±10% 2 mm ±10% 2 mm ±10% 5 mm ±10% 5 mm ±10% 10 mm ±10% 10 mm ±10% 18 mm ±10%

Set distance 0 to 1.2 mm 0 to 1.6 mm 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm

Differential travel 10% max. of sensing distance

Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)

Standard sensing
object

Iron, 8 x 8 x
1mm

Iron,12 x 12
x 1 mm

Iron, 12 x 12
x 1 mm

Iron, 15 x 15
x 1 mm

Iron, 18 x 18
x 1 mm

Iron, 30 x 30
x 1 mm

Iron, 30 x 30
x 1 mm

Iron, 54 x 54
x 1 mm

Response speed 25 Hz

Power supply voltage
(operating voltage
range)

*1

*1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is over –25 °C.

24 to 240 VAC, 50/60 Hz (20 to 264 VAC)

Leakage current 1.7 mA max.

Control
output

Load
current

*2

*2. When using an M18- or M30-sized E2E within an ambient temperature of 70 °C to 85 °C, make sure that the E2E has a control output of 5 to 200 mA max.

5 to 100 mA 5 to 200 mA 5 to 300 mA

Residual
voltage

Refer to Engineering Data.

Indicator Operation indicator (red LED)

Operation mode
(with sensing object
approaching)

Y1 Models: NO
Y2 Models: NC
For details, refer to Timing Charts.

Protection circuit Surge suppressor

Ambient temperature

*1 *2

Operating/Storage:
–25 °C to 70 °C (with no
icing or condensation)

Operating/Storage: –40 °C to 85 °C (with no icing or condensation)

Ambient humidity Operating/Storage: 35% to 95% (with no condensation)

Temperature
influence

±10% max. of sensing
distance at 23 °C in the
temperature range of
–25 °C to 70 °C

±15% max. of sensing distance at 23 °C in the temperature range of –40 °C to 85 °C
±10% max. of sensing distance at 23 °C in the temperature range of –25 °C to 70 °C

Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%

Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case (2,000 VAC for M8 Models)

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

500 m/s

2

10 times each in X,

Y, and Z directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP67 (Pre-wired models: JEM standard IP67g (waterproof, oil-proof))

Connection method Pre-wired models (standard length 2 m), connector models

Weight
(packed
state)

Pre-wired
models

Approx. 60 g Approx. 70 g Approx. 130 g Approx. 175 g

Connector
models

Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g

Material Case Stainless steel (SUS303) Brass-nickel plated

Sensing
surface

PBT (polybutylene terephthalate)

Clamping
nuts

Brass-nickel plated

Toothed
washer

Iron-zinc plated

Accessories Instruction manual

4 Cylindrical Inductive Sensor for AC Power Supply

Engineering Data

Output Circuit and Timing Charts

Pin Arrangement

E2E-X@Y@-M1 AC 2-wire Models

Output Operating

Status

Model Timing chart Output circuit

AC 2­wire
Models

NO E2F-X1R5Y1

E2F-X2Y1
E2F-X5Y1
E2F-X10Y1
E2E-@Y1

NC E2F-X1R5Y2

E2F-X2Y2
E2F-X5Y2
E2F-X10Y2
E2E-@Y2

Operation mode Applicable models Pin arrangement

NO E2E-X@Y1-M1

NC E2E-X@Y2-M1

Ye s

No

Operates
Releases

ON

OFF

Sensing object

Load

Detection indicator

Main
circuit

Load

Brown

Blue

Ye s

No

Operates
Releases

ON

OFF

Sensing object

Load

Detection indicator

Note: Terminals 1 and 2 are not used.

Load

Load

Note: Terminals 3 and 4 are not used.

Load

Load

5E2E-@Y/E2F-@Y

E2E

Operating Range (Typical)

Leakage Current (Typical)

E2E-X@Y@
E2F-X@Y@

E2E-X@MY@

12

10

8

6

4

2

0

−15 −10 −5 0 5 10 15
Distance Y (mm)

E2E-X10

E2E

-X1R5

E2E-X5

E2E-X2

Sensing distance X (mm)

X

Y

30

25

20

15

10

5

0

−30 −20 −10 0 10 20 30
Distance Y (mm)

E2E-X18M

E2E-X10M

E2E-X5M

E2E-X2M

Sensing distance X (mm)

X

Y

E2E-X@Y@

Leakage current (mA)

Supply voltage (V)

Proximity
Sensor
(when
OFF)

Protective
resistance

AC power
supply

E2F-X@Y@

Power supply voltage (V)

Proximity
Sensor
(OFF)

Protective
resistance

AC power
supply,
50/60 Hz

Leakage current (mA)

E2F-XjYj