Omron E2AG DATASHEET

Cylindrical Proximity Sensor

E2AG

• Highest value-performance ratio for standard applications

• Shielded and unshielded models with standard sensing range

Ordering information

Appearance Sensing distance Output

Shielded

Unshielded

Note:Add the cable length to the model number (example: E2AG-M12KS02-WP-B1 2M).

M8

M12 E2AG-M12KS02-WP-B1 E2AG-M12KS02-WP-B2

M18 E2AG-M18KS05-WS-B1 E2AG-M18KS05-WS-B2

M30 E2AG-M30KS10-WS-B1 E2AG-M30KS10-WS-B2

M8

M12 E2AG-M12KN05-WP-B1 E2AG-M12KN05-WP-B2

M18 E2AG-M18KN10-WS-B1 E2AG-M18KN10-WS-B2

M30 E2AG-M30KN18-WS-B1 E2AG-M30KN18-WS-B2

1.5 mm

2 mm

2 mm

5 mm

5 mm

10 mm

10 mm

PNP

PNP

18 mm

Operation mode NO Operation mode NC

E2AG-S08KS01-WP-B1 E2AG-S08KS01-WP-B2

E2AG-S08KN02-WP-B1 E2AG-S08KN02-WP-B2

Type

1E2AG

Model Number Legend

E2AG-@@@@@-@-@@-@

123 45 6 78 9

1. Housing shape and material
M: Cylindrical, metric threaded, brass
S: Cylindrical, metric threaded, stainless steel (only M8)

2. Housing size
08: 8 mm
12: 12 mm
18: 18 mm
30: 30 mm

3. Barrel length
K: Standard length

4. Shield
S: Shielded
N: Unshielded

eg., E2AG-M 12 K N 05-WP-B 1-2M

able length: 2 m

C
NO
DC, 3 wire, PNP
pre-wired, PVC, dia 4 mm
Sensing distance 3 mm
Unshielded
Standard length
M12
Cylindrical, brass

5. Sensing distance
Numeral: Sensing distance, e.g. 02=2 mm,10=10 mm
Exceptional case: 01=1.5 mm

6. Kind of connection
WP: pre-wired, PVC, dia 4 mm
WS: pre-wired, PVC, dia 6 mm

7. Power Source and Output
B: DC, 3-wire, PNP open collector

8. Operation mode
1: Normally open (NO)
2: Normally closed (NC)

9. Cable length
Numeral: Cable length

eg., E2AG-S 08 K S 01-WP-B 1-2M

Cable length: 2 m
NO
DC, 3 wire, PNP
pre-wired, PVC, dia 4 mm

Sensing distance 1.5 mm
Shielded
Standard length

M8
Cylindrical, stainless steel

2 Cylindrical Proximity Sensor

Specifications

Item M8 M12 M18 M30

Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded

E2AG­S08KS01-@-B1
E2AG­S08KS01-@-B2

Sensing
distance

Differential travel 10% max. of sensing distance

Detectable
object

Standard
sensing object

Response
frequency

Power supply
voltage
(operating
voltage range)

Current
consumption

Load
current

Residual

output

Control

voltage

Indicator Operation indicator (yellow)

Operation mode
(with sensing
object
approaching)

Protection
circuits

Ambient
temperature
range

Ambient
humidity range

Voltage
influence

Insulation
resistance

Dielectric
strength

Vibration
resistance

Shock
resistance

Degree of
protection

Connection
method

Weight Approx. 55 g Approx. 65 g Approx. 140 g Approx. 190 g

Case Stainless steel (SUS303) Nickel plated brass

Sensing
surface

Materials

*1.

The response frequency is an average value. Measurement conditions are as follows:standard sensing object, a distance of twice the standard sensing object, and
a set distance of half the sensing distance.

1.5 mm ±10% 2 mm ±10% 5 mm ±10% 10 mm ±10% 18 mm ±10%

Ferrous metal (The sensing distance decrease with non-ferrous metal. Refer to Engineering Data on pages 4 and 5)

Iron
8×8×1 mm

1 kHz 0.4 kHz 0.8 kHz 0.1 kHz 0.5 kHz 0.1 kHz 0.1 kHz 0.1 kHz

*1

12 to 24 VDC. Ripple(p-p):10% max.
(10~30 VDC)

13 mA max.

open collector, 200 mA max.

2 V max. (under load current of 200 mA with cable length of 2 m)

B1 Models: NO
B2 Models: NC

Refer to the timing charts under Output Circurt Diagrams of page 7 for details.

Reverse polarity protection,Surge suppressor,Load short-circurt protection

Operating / Storage: -25~+70°C (with no icing or condensation)

Operating / Storage: 35~95% RH

±10% max. of sensing distance in rated voltage range ±15%

50 MΩ min. (at 500 VDC) between current carry parts and case

1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case

10~55 Hz 0.75 mm double amplitude for 2 hours each in X,Y,and Z directions

500 m/s² 10 times
each in X,Y,and Z directions

IEC 60529 IP67

Pre-wired models (Standard cable length: 2 m)

PBT

E2AG­S08KN02-@-B1
E2AG­S08KN02-@-B2

Iron
12×12×1 mm

E2AG­M12KS02-@-B1
E2AG­M12KS02-@-B2

1,000 m/s² 10 times each in X,Y,and Z directions

E2AG­M12KN05-@-B1
E2AG­M12KN05-@-B2

Iron
15×15×1 mm

E2AG­M18KS05-@-B1
E2AG­M18KS05-@-B2

Iron
18×18×1 mm

E2AG­M18KN10-@-B1
E2AG­M18KN10-@-B2

Iron
30×30×1 mm

E2AG­M30KS10-@-B1
E2AG­M30KS10-@-B2

E2AG­M30KN18-@-B1
E2AG­M30KN18-@-B2

Iron
54×54×1 mm

3E2AG