Omron D4A-1101N, D4A-1104N, D4A-1102N, D4A-1103N, D4A-1105N Datasheet
...
General-purpose Limit Switch
D4A-
@N
F-9
Limit
Switches
General-purpose Limit Switch
D4A-
@N
The Limit Switch with Better Seal, Shock
Resistance, and Strength
• A double seal on the head, a complete gasket cover, and other
features ensure a better seal (meets UL NEMA 3, 4, 4X, 6P, 12,
13).
• Block mounting method to reduce weight to 290 g.
• Block mounting method also reduces downtime for mainte-
nance.
• Wide standard operating temperature range:
–40°C to 100°C (standard type).
• Models with fluoro-rubber available for greater resistance to
chemicals.
• DPDT, double-break models available for complex operations.
Model Number Structure
■
Model Number Legend
1. Receptacle Box
1: 1/2-14 NPT conduit (SPDT, double-break)
2: 1/2-14 NPT conduit (DPDT, double-break)
3: G 1/2 conduit (SPDT, double-break)
4: G 1/2 conduit (DPDT, double-break)
5: M20 x 1.5 conduit (SPDT, double-break)
6: M20 x 1.5 conduit (DPDT, double-break)
2. Switch Box
1: SPDT, double-break, without indicator
3: SPDT, double-break, neon lamp
A: SPDT, double-break, LED (12 VDC)
C: SPDT, double-break, LED
(24 VDC, leakage current: 4 mA)
E: SPDT, double-break, LED
(24 VDC, leakage current: 1.3 mA)
G: SPDT, double-break, LED (48 VDC)
5: DPDT, double-break, simultaneous operation, without indi-
cator
7: DPDT, double-break, sequential operation, without indicator
(See note 1.)
9: DPDT, double-break, center neutral operation, without indi-
cator (See note 2.)
L: DPDT, double-break, simultaneous operation, neon lamp
M: DPDT, double-break, sequential operation, neon lamp
(See note 1.)
N: DPDT, double-break, center neutral operation, neon lamp
(See note 2.)
P: DPDT, double-break, simultaneous operation, LED
Q: DPDT, double-break, sequential operation, LED
(See note 1.)
R: DPDT, double-break, center neutral operation, LED
(See note 2.)
3. Head
01: Roller lever, standard
02: Roller lever, high-sensitivity
03: Roller lever, low torque
04: Roller lever, high-sensitivity, low torque
05: Roller lever, maintained
17: Roller lever, sequential operation
18: Roller lever, center neutral operation
06: Side plunger, standard
07-V: Side plunger, vertical roller
07-H: Side plunger, horizontal roller
08: Side plunger, adjustable
09: Top plunger, standard
10: Top plunger, roller
11: Top plunger, adjustable
12: Flexible rod, spring wire
14: Flexible rod, plastic rod
15: Flexible rod, cat whisker
16: Flexible rod, coil spring
Note: 1.
Use the D4A-0017N Special Head.
2.
Use the D4A-0018N Special Head.
3.
Fluoro-rubber sealed type is also available.
1 2 3
D4A-@@@@N
F-10
General-purpose Limit Switch
D4A-
@N
Ordering Information
■
List of Models
SPDT Double-break Switches
Note: 1.
The Switches listed above with an optional G1/2 or M20 x 1.5 conduit can be supplied upon request. To order, change the conduit identifier in the model number as follows:
2.
Switches with fluoro-rubber seals (with an operating temperature range of –10°C to 120°C) may be ordered by adding an “F” suffix to the
model number. (Example: D4A-3101N-F for D4A-3101N) Contact your OMRON representative for details.
3.
Switches with silicon rubber seals that have high weather-proof performance are also available and may be ordered by adding an “T”
suffix to the model number. (Example: D4A-3112N-T for D4A-3112N) Contact your OMRON representative for details.
4.
Levers for Roller Lever Switches are optionally available. Select the lever from those listed in this datasheet (refer to
Levers
on pages 28
and 29) and order.
5.
“Roller lever: maintained” refers to actuators that possess a lock mechanism for switching operations. Use a Fork Lever Lock (D4A-E@@)
as the lever.
Actuator 1/2-14NPT conduit
Without indicator With neon lamp indicator (AC) With LED indicator (DC)
Model Approved
standards
Model Approved
standards
D4A-1101N UL, CSA D4A-1301N UL, CSA D4A-1A01N, D4A-1C01N,
D4A-1E01N, D4A-1G01N
D4A-1102N UL, CSA D4A-1302N UL, CSA D4A-1A02N, D4A-1C02N,
D4A-1E02N, D4A-1G02N
D4A-1103N UL, CSA D4A-1303N UL, CSA D4A-1A03N, D4A-1C03N,
D4A-1E03N, D4A-1G03N
D4A-1104N UL, CSA D4A-1304N UL, CSA D4A-1A04N, D4A-1C04N,
D4A-1E04N, D4A-1G04N
D4A-1105N UL, CSA D4A-1305N UL, CSA D4A-1A05N, D4A-1C05N,
D4A-1E05N, D4A-1G05N
D4A-1106N UL, CSA D4A-1306N UL, CSA D4A-1A06N, D4A-1C06N,
D4A-1E06N, D4A-1G06N
D4A-1107-VN UL, CSA D4A-1307-VN UL, CSA D4A-1A07-VN, D4A-1C07-VN,
D4A-1E07-VN, D4A-1G07-VN
D4A-1107-HN UL, CSA D4A-1307-HN UL, CSA D4A-1A07-HN, D4A-1C07-HN,
D4A-1E07-HN, D4A-1G07-HN
D4A-1108N UL, CSA D4A-1308N UL, CSA D4A-1A08N, D4A-1C08N,
D4A-1E08N, D4A-1G08N
D4A-1109N UL, CSA D4A-1309N UL, CSA D4A-1A09N, D4A-1C09N,
D4A-1E09N, D4A-1G09N
D4A-1110N UL, CSA D4A-1310N UL, CSA D4A-1A10N, D4A-1C10N,
D4A-1E10N, D4A-1G10N
D4A-1111N UL, CSA D4A-1311N UL, CSA D4A-1A11N, D4A-1C11N,
D4A-1E11N, D4A-1G11N
D4A-1112N UL, CSA D4A-1312N UL, CSA D4A-1A12N, D4A-1C12N,
D4A-1E12N, D4A-1G12N
D4A-1114N UL, CSA D4A-1314N UL, CSA D4A-1A14N, D4A-1C14N,
D4A-1E14N, D4A-1G14N
D4A-1115N UL, CSA D4A-1315N UL, CSA D4A-1A15N, D4A-1C15N,
D4A-1E15N, D4A-1G15N
D4A-1116N UL, CSA D4A-1316N UL, CSA D4A-1A16N, D4A-1C16N,
D4A-1E16N, D4A-1G16N
1/2-14NPT G1/2 M20 x 1.5
D4A-1
@@@
ND4A-3
@@@
ND4A-5
@@@
N
Roller lever: standard
(See note 4.)
Roller lever: highsensitivity (See note 4.)
Roller lever: low torque
(See note 4.)
Roller lever: highsensitivity/low torque
(See note 4.)
Roller lever: maintained
(See note 4 and 5.)
Side plunger
Side-roller plunger:
vertical roller
Side-roller plunger:
horizontal roller
Side plunger:
adjustable
Top plunger
Top plunger:
roller
Top plunger:
adjustable
Flexible rod:
Spring wire
Flexible rod:
Plastic rod
Flexible rod:
Cat whisker
Flexible rod:
Coil spring
General-purpose Limit Switch
D4A-
@N
F-11
Limit
Switches
DPDT Double-break Switches
Note: 1.
The Switches listed above with an optional G1/2 or M20 x 1.5 conduit can be supplied upon request. To order, change the conduit iden-
tifier in the model number as follows:
2.
Switches with fluoro-rubber seals (with an operating temperature range of –10°C to 120°C) may be ordered by adding an “F” suffix to the
model number. (Example: D4A-3101N-F for D4A-3101N) Contact your OMRON representative for details.
3.
Levers for Roller Lever Switches are optionally available. Select the lever from those listed in this data sheet (refer to
Levers
on pages 28
and 29) and order.
4.
“Roller lever: maintained” refers to actuators that possess a lock mechanism for switching operations. Use a Fork Lever Lock (D4A-E@@)
as the lever.
Actuator 1/2-14NPT conduit
Without indicator With neon lamp indicator
(AC)
With LED indicator
(DC)
Model Approved
standards
D4A-2501N UL, CSA D4A-2L01N D4A-2P01N
D4A-2502N UL, CSA D4A-2L02N D4A-2P02N
D4A-2503N UL, CSA D4A-2L03N D4A-2P03N
D4A-2504N UL, CSA D4A-2L04N D4A-2P04N
D4A-2505N UL, CSA D4A-2L05N D4A-2P05N
D4A-2717N UL, CSA D4A-2M17N D4A-2Q17N
D4A-2918N UL, CSA D4A-2N18N D4A-2R18N
D4A-2506N UL, CSA D4A-2L06N D4A-2P06N
D4A-2507-VN UL, CSA D4A-2L07-VN D4A-2P07-VN
D4A-2507-HN UL, CSA D4A-2L07-HN D4A-2P07-HN
D4A-2508N UL, CSA D4A-2L08N D4A-2P08N
D4A-2509N UL, CSA D4A-2L09N D4A-2P09N
D4A-2510N UL, CSA D4A-2L10N D4A-2P10N
D4A-2511N UL, CSA D4A-2L11N D4A-2P11N
D4A-2512N UL, CSA D4A-2L12N D4A-2P12N
D4A-2514N UL, CSA D4A-2L14N D4A-2P14N
D4A-2515N UL, CSA D4A-2L15N D4A-2P15N
D4A-2516N UL, CSA D4A-2L16N D4A-2P16N
1/2-14NPT G 1/2 M20 x 1.5
D4A-2
@@@
ND4A-4
@@@
ND4A-6
@@@
N
Roller lever: standard
(See note 3.)
Roller lever: highsensitivity (See note 3.)
Roller lever: low
torque (See note 3.)
Roller lever: highsensitivity/low torque
(See note 3.)
Roller lever: maintained
(See note 3 and 4.)
Roller lever: sequential
operating (See note 3.)
Roller lever: center
neutral operating
(See note 3.)
Side plunger
Side-roller plunger:
vertical roller
Side-roller plunger:
horizontal roller
Side plunger:
adjustable
Top plunger
Top plunger:
roller
Top plunger:
adjustable
Flexible rod:
Spring wire
Flexible rod:
Plastic rod
Flexible rod:
Cat whisker
Flexible rod:
Coil spring
F-12
General-purpose Limit Switch
D4A-
@N
Individual Parts
Replacement of Parts
Because the D4A-@N employs block mounting construction, the
switch body, receptacle, and operating head may be ordered as a
complete assembly or individually as replacement parts.
Receptacle Box
Note: 1.
M6-screw mounting (standard mounting)
2.
10-32UNF-screw mounting (standard mounting)
Switch Box
Receptacle Switch box Head Lever
D4A-1101N D4A-1000N D4A-0100N D4A-0001N
Levers for Roller Lever Switches are optionally
available. Select the lever from those listed in
this datasheet and order (refer to Levers on
pages 20 and 21).
Type Appearance 1/2-14NPT conduit (See note 2.) G1/2 conduit (See note 1.) M20 x 1.5 (See note 1.)
Model Approved
standards
Model Approved
standards
Model Approved
standards
SPDT
doublebreak
D4A-1000N UL, CSA D4A-3000N UL, CSA D4A-5000N UL, CSA
DPDT
doublebreak
D4A-2000N UL, CSA D4A-4000N UL, CSA D4A-6000N UL, CSA
Type Appearance Without indicator With neon lamp indicator
(AC)
With LED
indicator (DC)
Model Approved
standards
Model Approved
standards
Model
SPDT
double-break
D4A-0100N UL, CSA D4A-0300N UL, CSA D4A-0A00N
D4A-0C00N
D4A-0E00N
D4A-0G00N
DPDT
double-break
Simultaneous
operation
D4A-0500N UL, CSA D4A-0L00N --- D4A-0P00N
Sequential operation
D4A-0700N UL, CSA D4A-0M00N --- D4A-0Q00N
Center neutral
operation
D4A-0900N UL, CSA D4A-0N00N --- D4A-0R00N
(Without indicator lamp)
(Without indicator lamp)
General-purpose Limit Switch
D4A-
@N
F-13
Limit
Switches
Heads
Note: 1.
Levers for Roller Lever Switches are optionally available. Select the lever from those listed in this data sheet and order (refer to
Levers
on pages 28 and 29).
2.
The D4A-C00 adjustable roller lever is too heavy and long for these heads and it should not be used or mechanical malfunction will result.
3.
These heads cannot be used for double break operations.
Type Appearance Approved standards
Roller lever
(See note 1.)
UL, CSA
UL, CSA
Side plunger
UL, CSA
Top plunger
UL, CSA
Flexible rod
UL, CSA
Standard: D4A-0001N
High-sensitivity: D4A-0002N
Low torque: D4A-0003N (see note 2)
High-sensitivity/low torque: D4A-0004N (see note 2)
Sequential operation: D4A-0017N (see note 3)
Center neutral operation: D4A-0018N (see note 3)
Maintained: D4A-0005N
Standard:
D4A-0006N
Horizontal roller:
D4A-0007-HN
Vertical roller:
D4A-0007-VN
Side adjustable:
D4A-0008N
Standard:
D4A-0009N
Roller plunger:
D4A-0010N
Plunger adjustable:
D4A-0011N
Spring wire
D4A-0012N
Plastic rod
D4A-0014N
Cat whisker
D4A-0015N
Coil spring
D4A-0016N
F-14
General-purpose Limit Switch
D4A-
@N
Specifications
■
Approved Standards
■
Approved Standard Ratings
UL/CSA
A600
D4A-@1@@N (SPDT, Double-break, Without Indicator)
A300
D4A-@3@@N (SPDT, Double-break, With Neon Lamp)
B600
D4A-@5@@N (DPDT, Double-break, Simultaneous Operation)
D4A-@7@@N (DPDT, Double-break, Sequential Operation)
D4A-@9@@N (DPDT, Double-break, Center Neutral Operation)
Agency Standard File No.
UL UL508 E76675
CSA CSA C22.2 No. 14 LR45746
Rated voltage Carry current Current Volt-amperes
Make Break Make Break
120 VAC
240 VAC
480 VAC
600 VAC
10 A 60 A
30 A
15 A
12 A
6 A
3 A
1.5 A
1.2 A
7,200 VA 720 VA
Rated voltage Carry current Current Volt-amperes
Make Break Make Break
120 VAC
240 VAC
10 A 60 A
30 A
6 A
3 A
7,200 VA 720 VA
Rated voltage Carry current Current Volt-amperes
Make Break Make Break
120 VAC
240 VAC
480 VAC
600 VAC
5 A 30 A
15 A
7.5 A
6.0 A
3 A
1.5 A
0.75 A
0.6 A
3,600 VA 360 VA
General-purpose Limit Switch
D4A-
@N
F-15
Limit
Switches
■
Ratings
Note: 1.
The above current ratings are for steady-state current.
2.
Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3.
Lamp loads have an inrush current of 10 times the steady-state current.
4.
Motor loads have an inrush current of 6 times the steady-state current.
5.
For those with indicators, refer to the following rated voltages.
Indicators
Type Rated voltage Non-inductive load Inductive load
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
SPDT double-break
(with/without
indicator)
125 VAC (See note
5.)
10 A 10 A 3 A 1.5 A 10 A 5 A 2.5 A
250 VAC (See note
5.)
10 A 10 A 2 A 1 A 10 A 3 A 1.5 A
480 VAC 10 A 10 A 1.5 A 0.8 A 3 A 1.5 A 0.8 A
600 VAC 3 A 1 A 1 A 0.5 A 1.5 A 1 A 0.5 A
8 VDC 10 A 6 A 3 A 10 A 6 A
14 VDC 10 A 6 A 3 A 10 A 6 A
30 VDC 6 A 4 A 3 A 6 A 4 A
125 VDC (See note
5.)
0.8 A 0.2 A 0.2 A 0.8 A 0.2 A
250 VDC (See note
5.)
0.4 A 0.1 A 0.1 A 0.4 A 0.1 A
DPDT double-break
(without indicator)
125 VAC 5 A 2 A 4 A 3 A
250 VAC 3 A 1 A 2 A 1.5 A
480 VAC 1.5 A 0.5 A 1 A 0.8 A
600 VAC 1 A 0.4 A 0.7 A 0.5 A
14 VDC 5 A 2 A 4 A 3 A
30 VDC 3 A 1 A 2 A 1.5 A
125 VDC 0.4 A 0.1 A 0.4 A 0.1 A
250 VDC 0.2 A 0.05 A 0.2 A 0.05 A
DPDT double-break
(with indicator)
125 VAC 5 A 2 A 4 A 3 A
250 VAC 3 A 1 A 2 A 1.5 A
12 VDC 5 A --- --- --- --24 VDC 3 A
48 VDC 1 A
Type SPDT, double-break DPDT, double-break
Without indicator With indicator Without indicator With indicator
Inrush
current
Normally closed
30 A max.
Normally open
20 A max.
Classification Indicator Model Rated voltage Carry current Internal resistance
SPDT
double-break
Neon lamp D4A-0300N 125 VAC, 250 VAC Approx. 0.47 mA 150 k
Ω
LED D4A-0A00N 12 VDC Approx. 3.2 mA 2.2 k
Ω
D4A-0C00N 24 VDC Approx. 4 mA 4.7 k
Ω
D4A-0E00N 24 VDC Approx. 1.3 mA 15 k
Ω
D4A-0G00N 48 VDC Approx. 2 mA 22 k
Ω
DPDT
double-break
Neon lamp D4A-0L00N
D4A-0M00N
D4A-0N00N
125 VAC, 250 VAC Approx. 0.28 mA 240 k
Ω
LED D4A-0P00N
D4A-0Q00N
D4A-0R00N
48 VDC Approx. 1.4 mA ---
Loading...