Omnitron Systems Technology OC12FF User Manual

FlexPoint

FlexPoint™ OC12FF

Single-mode to Multimode Fiber Converters for OC-12

The FlexPoint that provides reliable and cost-effective extension of network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.

No manual configuration is required with the plug-and-play FlexPoint OC12FF . Connect the fiber cables to the appropriate interface and the installation is complete.

The fiber port operates at 1310nm or 1550nm and features SC connectors. Multimode fiber models support distances of up to 550m, and single-mode fiber models support distances of up to 80km.

The FlexPoint OC12FF features descriptions of the LED indicators on the label for easy in-the-field installation and maintenance. The LEDs report the availability of power and the detection of devices attached to the fiber ports.

OC12FF is a protocol-independent fiber converter

FlexPoint modules can be mounted utilizing optional wallmounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.

FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector.

The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow.

 The FlexPoint OC12FF single-mode to multimode

protocol-independent fiber converter

 Supports all OC-12 standards over A TM and SONET  Requires no manual configuration  Supports auto-negotiation of duplex mode  Extends network distances up to 80km  Labeled status LEDs for quick and easy installation  Wall-mount or rack-mount on a 5-Module shelf or in a

14-Module power-redundant FlexPoint Powered Chassis

 Completely software independent with no installation

of drivers required

 Peace-of mind reliability backed by a lifetime

warranty and free 24/7 technical support

Simple, dependable and flexible. For over a decade, FlexPoint media converters have been providing reliable fiber connectivity in Enterprise and mission-critical networks around the world.

Model Type OC12FF Protocols

Fiber Cables Fiber

Connectors LED Displays

Dimensions Weight Co m plian ce

Power Requirements

Tem pe ra t ure Humidity Altitude

MTBF (Hours)

Multimode: 50/125, 62.5/125, 100/140µm

Power, Fiber Link/Activity

W: 3.0" x D: 4.0" x H: 1.0"

6 oz. (without power adapter)

NominalVoltage:

Voltag e Rang e:

Power Nominal:

Maximum P ower:

5 to 95% (non-condensing)

Module without Power Adapter: 2,600,000 Module with Power Adapter -1: 250,000 Module with Power Adapter -2: 100,000

OC-12

Single-mode : 9/125µm

UL, CE, FCC Class A

Barrel

Connector

9VDC

6.0 to 15.0VDC

0.2A @ 9VDC 1A @ 9VDC

0 to 50o C

-100m to 4000m

Molex

Connector

5VDC

4.75 to 5.25V DC

0.5A @ 5V D C

0.75A @ 5VD C

The FlexPoint OC12FF fiber converter can extend the network across single-mode fiber with distances up to 80km. In this application, the customer's router is connected to an Add Drop Multiplexer (ADM) providing access to the SONET ring using a pair of FlexPoint OC12FF fiber converters. The converters provide the multimode to single-mode conversion.

Port Fiber Type Distance

Port 1 MM 550m Port 2 SM 12km Port 1 MM 550m Port 2 SM 34km Port 1 MM 550m Port 2 SM 80km

Connector

4461-X

4463-x

4469-x

Wavelength

[nm] 1310

1310 1310 1310 1310 1550

Min. Tx Power

(dBm)

Max. Tx

Power

(dBM)

-20 -14 -26 -14 6

-9.5 -3 -19.5 -3 10

-20 -14 -26 -14 6

-5 0 - 23 -3* 18

-20 -14 -26 -14 6

-5 0 -26 -3* 18

Min. Rx

Sensitivity

(dBm)

Max. Rx

Sensitivity

(dBm)

Link

Budget

(dBm)

Pow e r Adap ter Kits (-x): -0 = No power adapter included, -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no powe r cord) For other power and fiber confi gurati ons, contact Omnitron. *When using these models in pairs, a minimum attenua tion of 3dB is required.

Trademarks are owned by their respective companies. FlexPoint is a trademark of Omnitron Systems Technology, Inc. Specifications subject to change without notice. © 1998-2007 Omnitron Systems Technology, Inc.

091-04460-004C 12/07

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. • Irvine, CA 92618