Omnitron Systems Technology iConverter 10-100 User Manual

iConverteriConverter

®

iConverter

10BASE-T or 100BASE-TX to Fast Ethernet Managed Media Converter

The iConverter 10/100 managed media converters are
members of the modular iConverter product family, and provide

10BASE-T or 100BASE-TX to 100BASE-FX ber conversion.

The iConverter 10/100 modules are available with multimode,

single-mode and single-ber options, and support ST, SC
and LC connectors. The UTP port supports 10/100 and Half/

Full-Duplex auto-negotiation with both hardware and software

manual override. A UTP crossover switch eliminates the need

for a crossover cable and facilitates connectivity to network

equipment. The 10/100 also features two Ethernet Backplane

ports to provide connectivity to adjacent modules for network
expansion and for in-band connectivity to an iConverter

Network Management Module.

The 10/100 features user-selectable Link Propagate, Link

Segment and Remote Fault Detection modes to facilitate quick

fault detection, isolation and reporting.

iConverter 10/100 modules are hot-swappable and can be

mounted in a 19-Module (2U high) or 5-Module (1U high) rack­mountable chassis (19-inch or 23-inch) with any combination
of redundant AC, 24VDC or 48VDC power supplies. They
can also be mounted in a 2-Module AC or 18 to 60VDC powered
chassis, or in a 1-Module AC/DC powered chassis.

10/100

Key Features

The ■ iConverter 10/100 is an IEEE 802.3 compatible
10BASE-T or 100BASE-TX to Fast Ethernet

ber converter

Supports multimode, single-mode, and single-ber with ■
ST, SC and LC connectors

UTP port with 10/100 automatically supports Half or ■

Full-Duplex auto-negotiation with a manual crossover
switch

The iConverter Multi-Service Platform consists of Network

Interface Devices, T1/E1 multiplexers, CWDM multiplexers

and managed media converters that combine to deliver

Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This exible architecture supports a wide variety
of congurations for scalable and reliable ber connectivity in
Service Provider and Enterprise networks.

User-selectable link fault detection modes facilitate ■

quick fault detection, isolation and reporting

Management is available with the addition of a ■
management module to the chassis

SNMP management via ■ NetOutlook® provides real-
time port and module information, remote parameter

conguration and trap notication

Modules are hot-swappable in 19-Module, 5-Module, ■

2-Module or 1-Module chassis

LED displays for immediate visual status of each port ■

Wide Temperature models available with temperature ■
range of -40 to +60º C

Lifetime Warranty and free 24/7 Technical Support ■

speciFicatiOns

Model Type 10/100

Protocols

100BASE-FX, 10BASE-T,

or 100BASE-TX

UTP Connectors

RJ-45

Fiber Connectors

SC, ST, LC, Single-Fiber SC

Controls

UTP X-over, LS/LP, RFD, Auto/Man,

10/100, FDX/HDX

LED Displays

Power, F O link, UTP link, Auto,

UTP FDX/HDX, F/O F DX/HDX , 10, 100

Dimensions

W:0.85" x D:4.5" x H:2.8"

Weight

8 oz.

Compliance

UL, CE, FCC Class A, NEBS Level 3

Power Requirement

0.95A @ 3.3VDC (typical)

Temperature

Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C

Humidity

5 to 95% (non-condensing)

Altitude

-100m to 4000m

MTBF (hrs)

1,050,000

Model Type

Fiber /

Med ia

Type

Distances

Connector Types

Tx

Wavelength

(nm)

Rx

Wavelength

(nm)

Min. T x

Power
(dBm)

Max. Tx

Power
(dBm)

Min. R x

Sens itiv ity

(dBm)

Max. Rx

Sens itiv ity

(dBm)

Link

Budget

(dBm)

ST SC LC

10/100

Dual Fiber

MM 2km

8380-6 8382-6 -

850 850 -10 -4 -24 -3 14

MM 5km

8380-0 8382-0 8386-0

1310 1310 -24 -14 -31 -14 7

SM 30km

8381-1 8383-1 8387-1

1310 1310 -15 -8 -31 -8 16

SM 60km

8381-2 8383-2 8387-2

1310 1310 -5 0 -31 -3* 26

SM 120km

- 8383-3 8387-3

1550 1550 -5 0 -31 -3* 26

10/100

Single-Fiber

SM 20km

- 8390-1 -

1310 1550 -15 -5 -30 -3 15

SM 40km

- 8390-2 -

1310 1550 -8 0 -30 -3* 22

SM 60km

- 8390-3 -

1310 1550 -5 0 -31 -3* 26

SM 20km

- 8391-1 -

1550 1310 -15 -5 -30 -3 15

SM 40km

- 8391-2 -

1550 1310 -8 0 -30 -3* 22

SM 60km

- 8391-3 -

1550 1310 -5 0 -31 -3* 26

For wide temperature (-40 to 60º C), add a "W" to the end of the model number. Consult factory for extended temperature (-40 to +75º C) models and other fiber

configurations. When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.

management

Management is accomplished by using a Network Management
Module (NMM2) or a media converter with integrated management
(such as an iConverter 10/100M2) that provides monitoring,

remote conguration and trap notication. The management
module can be accessed via SNMP, Telnet and via a serial
port. The SNMP-based management is accomplished via

Omnitron’s intuitive, graphic-oriented NetOutlook management

software or third party SNMP management software, while the

Telnet and the serial interfaces have an easy-to-use, menu-

driven interface.

Some of the real-time 10/100 parameters that can be monitored

include power, link and data receive status. Other parameters

include module type and model, hardware and software

revisions, serial numbers, and an user-dened identier.

Th e user can over ride th e 10/10 0 module ’s ph ysical

DIP-switch settings using SNMP or Telnet to remotely congure
DIP-switch-selectable parameters such as auto-negotiation,
Half/Full-Duplex, Link Mode selection, and Ethernet Backplane
selection.

In addition to all standard iConverter SNMP traps such as
module insertion and removal, the 10/100 modules can
generate traps on port state changes including link-up and

link-down. Trap monitoring of specic events can be selectively
enabled or disabled by the network administrator.

Ordering inFOrmatiOn

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [e-mail] • 140 Technology Dr., Irvine, CA 92618

© 2012 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are Registered Trademarks of Omnitron Systems Technology, Inc.

Trademarks are owned by their respective companies. Specications are subject to change without notice.

091-18380-007M 2/12

iConverter 10/100

Page 2