Omnitron Systems Technology FlexPoint 5-Unit Rack-Mounting Shelf User Manual

FlexPoint™ 5-Module Rack-Mounting

Shelf User Instructions

Description:

The FlexPoint 5-Module rack-mounting shelf was
designed to hold up to 5 FlexPoint media converters.

Inventory:

The FlexPoint rack-mounting kit includes the following
hardware:

(1) Shelf unit.
(5) “L” shaped tab brackets.
(5) Flat head screws, 4-40, 1/4 inch.
(5) Pan head screws, 4-40, 1/4 inch.

Warning:

Before installing a FlexPoint converter unit, make sure
to remove it from its power adapter. Make sure to
disconnect the power adapter from the AC line power.

Mounting:

Installing the FlexPoint Rack-Mounting kit is done in
two steps:

Installing the Tab Brackets:

1. Remove screw from forward-side of the FlexPoint
converter unit to be installed.

2. Align the screw threads of the FlexPoint enclosure
with the holes in the bracket.

3. Attach bracket using the removed screw and a
second 4-40 flat head screw enclosed with the kit.

4. The FlexPoint with the tab bracket should look as in
the picture below.

Installing the FlexPoint Converter Unit:

1. Slide unit into the shelf. Rear of the unit should
protrude the opening at the rear of the shelf.

2. Attach tab bracket to the shelf using a 4-40
pan-head screw from the parts kit.

3. Follow any installation instructions in the FlexPoint
converter User Installation guide.

NOTE: FlexPoint units installed with the optional

DC Adapter (4384) can not be mounted to the
shelf.

Technical Support:

If you encounter problems in installing or maintaining
this product, contact Omnitron Technical Support:

Phone: [phone]
Fax: [phone]
Address: Omnitron Systems Technology, Inc.

140 Technology Drive, #500
Irvine, CA 92618 USA

Email: [e-mail]

Please complete both sides of this form

User Warranty Registration

Omnitron Systems Technology, Inc.

140 Technology Drive, #500

Irvine, CA 92618 USA

Fax: [phone]

_______________________________________________

Please complete both sides and mail or fax this registration form to:

Name:___________________________________________________

Company:_______________________________________________

Address:_______________________________________________

City: ___________________ State: _______ Zip Code: __________

Country:________________________________________________

Phone: ____________________ Fax: _________________________

E-mail:__________________________________________________

Warning

The operating description in this Instruction Manual is
for use by qualified personnel only. To avoid electrical
shock, do not perform any servicing of this unit other
than that contained in the operating instructions, unless
you are qualified and certified to do so by Omnitron
Systems Technology, Inc.

Caution

All user-required operations can be performed without
opening the unit. Never attempt to open or remove the
cover or tamper with the unit.

Warranty

This product is warranted to the original purchaser
against defects in material and workmanship for a
period of TWO YEARS from the date of shipment. A
LIFETIME warranty may be obtained by the original
purchaser by REGISTERING this product with
Omnitron within 90 days from the date of shipment.
TO REGISTER, COMPLETE AND MAIL OR FAX THE
REGISTRATION PORTION OF THIS INSTRUCTION
MANUAL TO THE INDICATED ADDRESS. During the
warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective.

For warranty service, the product must be sent to an
Omnitron designated facility, at Buyer’s expense.
Omnitron will pay the shipping charge to return the
product to Buyer’s designated US address using
Omnitron’s standard shipping method.

Limitation of Warranty

The foregoing warranty shall not apply to defects
resulting from improper or inadequate use and/or
maintenance of the equipment by Buyer, Buyer­supplied equipment, Buyer-supplied interfacing,
unauthorized modifications or tampering with equipment
(including removal of equipment cover by personnel
not specifically authorized and certified by Omnitron),
or misuse, or operating outside the environmental
specification of the product (including but not limited
to voltage, ambient temperature, radiation, unusual dust,
etc.), or improper site preparation or maintenance.

No other warranty is expressed or implied. Omnitron
specifically disclaims the implied warranties of
merchantability and fitness for any particular purpose.

Exclusive Remedies

The remedies provided herein are the Buyer’s sole and
exclusive remedies. Omnitron shall not be liable for any
direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal
theory.

Form:040-04392-001B 11/07

Notes:

____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
_____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________

Please complete both sides of this form

User Warranty Registration

______________________________________________________

______________________________________________________

Please complete both sides and mail or fax this form to the address indicated on

the other side.

Product Type: S Rack-Mount Kit S Chassis S Other _________

Model: _________________________________________________

Serial Number: ______________ Purchase Date: ______________

Purchased From: _________________________________________

Address: ______________________________________________

City: ___________________ State: _______ Zip Code: ________

Country: _______________________________________________

Comments and Suggestions: _______________________________