Omnitron Systems Technology 8249-0 User Manual

iConverter

®

Wall-Mounting Kit

User Instructions

3. The

iConverter with the tab brackets should look

like the picture below (Fig. 1).

4. Attach unit to the desired surface using the
appropriate screws.

5. Follow any installation instructions in the
User Manual.

iConverter

Description and Inventory

The 8249-0
designed to attach one
Module chassis to a wall, backboard or other flat
surface. The 8249-0 kit should include the following
hardware:

(2) “L” shaped brackets
(4) Flat head screws, 4-40, 1/4 inch
(4) Wall mounting screws

Warning:

Before installing an
remove it from its power adapter. Make sure to
disconnect the power adapter from the AC line power.

Mounting:

1. Align the screw threads of the
with the holes in the bracket.

2. Attach one “L” bracket on each side of the unit
using the 4-40 flat head screws enclosed with the kit.

iConverter Wall-Mounting kit was

iConverter 1-Module or 2-

iConverter chassis, make sure to

iConverter chassis

Wall Mounting Bracket

Fig. 1 1-Module Chassis with

Wall Mounting Kit

Technical Support:

For help with this product,

contact our Tech. Support:

Phone: [phone]
Fax: [phone]
Address: Omnitron Systems

040-08249-001C 12/03