Omnitron Systems Technology 12-08 User Manual
iConverter
iConverter
iConverter
®
NMM
Network Management Module
The iConverter Network Management Module (NMM) is the heart
of the iConverter management system. It supp orts SNMP v1,
SNMPv2c, SNMPv3 and T elnet protocols, and features a 32-bit,
high performance RISC microprocessor executing a real-time
operating system. SMNPv3 provides secure access to devices
by a combination of authenticating and encrypting packets over
the network.
The NMM manages all converters and chassis power supplies
within its management domain (modules and chassis connected
to the NMM), continuously collecting status and module
information. It reports the collected status via the SNMP
protocol to the network management applications.
The NMM features a serial port for initial configuration, a
front-plane RJ-45 Ethernet port, a backplane Ethernet port and
a pair of multi-chassis cascade ports.
The Ethernet backplane port is used to connect adjacent
iConverter
offering direct Ethernet backplane access to the NMM. External
management (out-of-band) is accomplished via the front-plane
Ethernet port, facilitating IP based element management using
NetOutlook
The NMM utilizes Operations, Administration and Maintenance
(OAM) services for carrier-grade network access with
comprehensive provisioning and network monitoring. It features
IP-based and IP-less management of iConverter
the management domain.
modules in the same chassis (in-band management),
®
or third-party SNMP management applications.
equipment within
The iConverter
trap notification and remote configuration of iConverter
equipment within the same domain
Utilizes IEEE 802.3ah and Omnitron’s Secure
IP-Less OAM management channels for managing
remote chassis in the same domain
Up to nineteen chassis can be linked to form a domain
and be managed by a single IP address
Managed via the Ethernet backplane, the front-plane
RJ-45 Ethernet port, or the front-plane serial port
Supports SNMPv1, SNMPv2c, SNMPv3 and T elnet
protocols
NMM provides real-time management,
The NMM supports IP-less management through the IEEE
802.3ah management channel and Omnitron’s Secure and
encrypted management channel. With IP-less management,
an NMM in a chassis at the network core can manage up to 18
iConverter
locations with a single IP address. This capability simplifies IP
address management, improves network security , and conserves
the use of IP addresses.
When managing high-density configurations in a Central Office
or network core, the NMM can cluster (daisy-chain) up to 19
chassis into a single IP address. In this configuration, NMM
modules within each chassis are connected to each other over
a high speed serial connection.
Network Interface Devices (NIDs) at different edge
Supports Dying Gasp power loss trap notification
SNMP management via Omnitron’s NetOutlook
management software, or third-party SNMP
management software
Password protected to prevent unauthorized access
LED displays for immediate visual status of each port
Hot-swappable in 19-Module, 5-Module, or 2-Module
chassis
Lifetime Warranty and free 24/7 Technical Support
IP-less management requires an NMM in the core chassis, and
a media converter with integrated management installed at each
remote end of the IP-less managed link. An
iConverter
10/100M2
plug-in module is installed in the 19-Module chassis, and
connected via the fiber link to a standalone 10/100M2 Network
Interface Device (NID). This configuration enables the 19-Module
master chassis to establish an IP-less management channel
between the 10/100M2 link partners. The IP address
resides only at the network core, and does not exist on the
customer network.
Model Type NMM
Protocols
Connectors
Controls
LED D isplays
Supported MIBs
Dimensions
Weight
Compliance
Power R equ irement
Temperature
Humidity
Altitu de
MTBF (hrs)
IP, UD P, SNMPv1, S NMPv2c, SNMPv3,
Telnet, TCP, FTP, ARP, ICMP, 802.3ah
RJ-45, DB-9
UTP cr o s s-over, Frontpla ne / Bac k plane
Po wer, Po wer S upply (3), UTP li nk,
Master, Slave, Mgt. Poll
RFC1155, RFC1156, RFC1157,
RFC1212, RFC1213, OST MIB
W:0.85" x D:4.5" x H:2.8"
8 oz.
UL, CE, FCC Class A, NEBS 3
0.32A @ 3.3VDC (typi cal)
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
5 to 95% (non-condensing)
-100m to 4000m
786,000
Active Controls
• Link Propagate/Link Segment
• Remote Fault Detection
• Module Name
• Chassis Name and Number
• IP Address
• 802.3ah OAM Enable
• Secure IP-less OAM Enable
• Subnet Mask
• Gateway
• Management Port Disable
• Alarm Threshold Setting
• Download Software via FTP
• Reset Chassis
• Telnet
• Trap IPs
• FTP Enable
• Password Selection
• Soft Switch Reload
Alarms / Trap s
• Warm Start
• Link Up/Down
• Chassis Insertion/Removal
• Authentication Failure
• DIP-Switch Configuration Change
• Software Configuration Change
• Temperature Out-of-Range
• Power Supply Out-of-Range
• Power Supply Insertion/Removal
• Chassis Reset
• Module Reset
• Module Insertion/Removal
• Port Link State Change
• Redundancy Primary Up/Down
• Redundancy Secondary Up/Down
• FTP Session Open/Close
• Telnet Session Open/Close
• Dying Gasp (Power Loss Trap)
Model Description
8000-0
8080-3
8081-3
iConverter NMM Module w/ Dying Gasp Support
NMM Cascade Cable (3 ft.)
NMM Serial Cable (DB-9, 3 ft.)
Chassis Information
• Part Number
• Serial Number
• Revision
• Description
Chassis Status
• Power Status
• Power Output Voltage
• Chassis Temperature
Module Status
• Module Power
• Link Status
• Active Port
• Diagnostic Status
• Management
Module Information
• Module Type
• Slot Occupied
• Part Number
• Serial Number
• Configuration
• Revision
• Ports on Module
• User-defined Identifier
Trademarks are owned by their respective companies. iConverter and NetOutlook are registered trademarks of Omnitron Systems Technology , Inc.
Specifications subject to change without notice. ©2008 Omnitron Systems T echnology , Inc. All right s reserved.
091-18000-001H 12/08
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. • Irvine, CA 92618
Loading...