Omnitemp WC2-18 User Manual

VL SERIES

L

I

S

E

D

L

I

S

D

S

A

N

I

T

A

T

I

O

N

ValuePro

by

STANDARD FEATURES

WC2

MODELS

Wet & Dry Waste Center

PROjECT ____________________________

ITEM NO. _____________________________

QTY. _________________________________

MODEL NO. ___________________________

WET & DRY WASTE CENTER

LINE MODEL LENGTH DEPTH SINK SIzE

VL WC2-18 18” 23” 9” x 11” x 6” DEEP

OPTIONS

CB ---------- cabinet base with door

M------------ customized

■

ALL WELDED CONSTRUCTION - fully welded, ground and pol­ished to form one integral unit; no screws, pop-rivets or solder.

■

TOP - 18 ga. #304 series, stainless steel.

■

BACK 20 ga. #304 series, stainless steel.

■

BOTTOM 20 ga. #304 series, stainless steel.

■

ENDS 20 ga. #304 series, stainless steel.

■

BACKSPLASH - 18 ga. #304 series, stainless steel.

■ LEG ASSEMBLIES - 14 gauge s/s channels with 1-5/8” s/s tube legs

and adjustable s/s bullet feet.

■ Dump sink with strainer basket and faucet.

■

6” diameter waste chute in top and plastic

waste receptacle.

ValuePro

Waste Center

Model Number Guide

Use this guide to create the

model specific to your needs.

VL - WC2 - ___ - ___

Wet & Dry

Conforms to Ansi/nsf stAndArd 2

Options

Length

in inches

Omni • 9300 Hall Rd. • Downey, CA 90241 • [phone] • FAX [phone]

VL SERIES

ValuePro

by

PLAN

WC2

Wet & Dry Waste Center

23” DEEP

MODELS

ELEVATION

Omni • 9300 Hall Rd. • Downey, CA 90241 • [phone] • FAX [phone]

SECTIONS