Omnitech NXC122PA Easy Operating Instructions
12-SHEET CROSS-CUT SHREDDER
TRITURADORA DE CORTE TRANSVERSAL
PARA 12 HOJAS
DÉCHIQUETEUR À COUPE EN FRAGMENTS
DE 12 FEUILLES
We’re here to help!
Product Support:
1-866-790-8026
¡Estamos para ayudarle!
Soporte de Productos:
1-866-790-8026
easy operating instructions
instrucciones para una operación sencilla
instructions simples
Besoin d’aide ?
Soutien au produit :
1-800-605-0504
NXC122PA
Model # NXC122PA:
••
Specifications:
Shredding capacity: 12 sheets of 20lb (75 sm)
paper with one standard staple, 1 credit card
Shred type: cross-cut
Average shred size:
0.20 x 1.57 in (5 x 40 mm)
Light duty: Up to 25 uses per day
Entry width: 8.66 in (220 mm)
Shredding speed: up to 9.2 ft/minute
(2.8 meters/minute)
Weight: 8.7 lbs (4.0 kg)
Dimensions: 13.4 x 6.7 x 15.4 inch
(34 x 17 x 39 cm)
Reverse AutoOff
feed opening
••
Additional features:
Auto start/stop for convenient one-handed
operation
Reverse function helps clear paper jams
Overheat protection with LED light goes on and
machine shuts down to cool off in case of
overheating
Safety interlock switch shuts machine down if
shredder top is removed from basket while in use
Plastic basket
Basket capacity: 3.3 gallon (12.4 liter)
Helps support HIPAA and FACTA compliance
auto/off/rev
basket
Have technical questions?
Before returning any product to our store, call our
Product Support experts from 8 am to 8 pm EST Mon-Fri:
2
1-877-972-9387
easy operating instructions
Read all instructions before use.
Save these instructions for later use, and
follow all warnings and instructions
marked on the product.
••
Safety instructions
WARNING:
Important safeguards to avoid serious
injury:
NEVER insert hand or fingers into feed
opening.
Keep eyes protected from opening.
Keep children and pets away from shredder
AT ALL TIMES.
Keep personal and loose objects
(jewelry, ties, long hair, etc.) away
from entry.
Never use flammable, petroleum-based,
canned air or aerosol cleaners on this product.
Some agents may combust causing serious
injury. Use only recommended lubricant in a
non-aerosol container. (See“Maintenance”.)
CAUTION:
• Never allow children to operate paper
shredder, even under adult supervision. Paper
shredders can pull children’s fingers into the
shredder mechanism.
• This shredder should be used only with an
operator in attendance. Keep the shredder in the
off position and unplug from the AC outlet when
not in use for an extended period of time.
• Intended for personal use up to 25 uses per day.
Do not exceed recommended sheet capacity.
• Do not shred plastic (except credit cards),
continuous forms, adhesive labels,
transparencies, newsprint or cardboard.
• Do not shred paper clips or other hard materials.
• This shredder is intended for indoor use only.
Shredder should never be placed near water,
over a radiator or near a heat register.
• Do not use this product if it or the cord has been
damaged in any way. (See “Power Cord Care”.)
• Do not service this product yourself. Do not open
the cover for any reason. Doing so can expose
you to dangerous voltages and will void your
warranty.
• Make sure the shredder is plugged into an easily
accessible electrical wall outlet.
• Always turn off the shredder by unplugging the
machine before moving, cleaning or any other
conduct other than normal operation.
• This shredder should be used only with an
operator in attendance. Keep shredder in the
OFF position and unplug from the AC outlet
when not inuse for an extended period of time.
• Avoid shredding envelopes, labels or
anything with glue or adhesives-this will
lead to paper jams.
3
••
Set up
Unpacking your shredder:
1
Remove all packing materials from the
shredder.
2
Place the shredder on a flat level surface.
NOTE: This shredder will operate only when
used with the supplied basket.
3
Make sure safety interlock switch is engaged or
unit will not operate.
4
Be sure that wastebasket is not tilted more
than 10º when shredder is being used.
••
Operating instructions
Keep private information private.
You’re almost ready to help protect your identity.
Whether you’re destroying a credit card offer with
your name on it or confidential employee records,
just follow these steps:
With the power switch in the OFF position, plug
1
the shredder into a grounded electrical outlet.
Slide the power switch button into the AUTO
2
position.
The ready LED will illuminate GREEN and the
3
shredder is now ready for operation.
Insert paper straight into the feed opening. The
4
Auto Start/Stop smart sensor allows the unit to
automatically start when an item is placed into
the feed opening and stop as soon as the item
travels completely through the feed opening.
• Remove all paper clips from paper prior to
shredding.
• When shredding credit cards, insert credit card
through designated slot.
Empty the basket frequently for smooth operation
5
and to avoid jams.
6
Turn the shredder OFF prior to placing hands in
wastebasket.
NOTE: This shredder is not designed to shred
labels or any paper with labels. Shredding labels
can cause blades to gum up and damage unit.
For the safety of children and pets, always
move the power switch to OFF and unplug the
shredder when it is unattended or not in use.
4
••
Clearing a jam:
If paper is not inserted properly into the shredder,
or if the sheet capacity is exceeded, a jam may
result. The shredder will automatically stop until
the jam is cleared. To clear a jam:
• Move the power switch to the REVERSE (REV)
position, and grasp the excess paper from the top
and pull it out. Be careful not to place your
hands near the feed opening to prevent any
injuries. Once the jammed paper is cleared,
normal shredding operation can resume. (If
wastebasket is full, unplug the machine and
empty the basket before clearing the jam).
• I f the shredder jams while in reverse, move the
power switch to AUTO and let the shredder run
for about ve seconds. If jam does not clear,
move power switch to REVERSE again and run for
five seconds. Repeat this procedure until jam is
cleared. If the jam cannot be cleared following this
procedure, unplug the unit and carefully remove
the jammed paper manually.
• Once the jam is cleared, move the power switch to
AUTO to continue shredding, or to OFF if shredding
is complete.
••
Overheating:
The motor overheat circuit has been tripped
when the overheat LED light illuminates RED. This
circuit terminates power automatically if the unit
is shredding continuously beyond the machine’s
maximum running time for over 2 minutes. This is
necessary to protect the motor from overheating.
To reset the motor overheat circuit turn the unit
off and wait about 30 minutes. Then turn the unit
back on and resume normal operation.
Make sure to periodically empty the waste
receptacle to avoid overloading the basket and
damaging the cutting mechanism.
••
Power cord care
• Do not lift unit by the power cord.
• Operate shredder from the power source indicated
on the serial label. If you are unsure of the power
source, consult your dealer or local power company.
• Since the power cord serves as the disconnect
switch, make sure the shredder is plugged into an
easily accessible wall outlet. The power cord cannot
be replaced. If the power cord is damaged, the
shredder should be discarded.
• Do not rest anything on the power cord.
• Do not place machine where persons may trip over
or walk on the power cord.
• If an extension cord is used, make sure that the total
ampere ratings of the products plugged into the
extension cord do not exceed the extension cord
ampere rating, and that the total of all products
plugged into the wall outlet does not exceed 15 amp.
••
Care and maintenance
Shredder lubricant is recommended for your
shredder and will lengthen the lifespan of your
machine. Apply lubricants after 30 minutes of
shredding or a minimum of twice per month to
eliminate build-up on your shredder’s cutting heads
and allow your machine to run at
maximum performance.
Have technical questions?
Before returning any product to our store, call our
Product Support experts from 8 am to 8 pm EST
Mon-Fri: 1-877-972-9387
5
Loading...