Features:
Two-way active speaker with one 10" woofer and
one 1" driver.
Cabinet is made from polypropylene and special high-tech
material. It's durable, anti-shock and has good damping
characters.
Voice coil in the 10" woofer is made from 50mm copper
cladding aluminium ribbon wire.
Heavy duty protective grille.
Rotatable 90 x 60 (HxV) dispersion horn makes it suitable
for any performance purposes.
Molded-in pole mount, easily suspended.
Arrayable vertically in 4 layers or horizontally in more than
8 columns.
U10a
Model:U10a
Technical Parameters
System:
Driver Quantity:
Frequency Response(-3dB):
Frequency Response(-10dB):
Max Sound Level(dB/1M):
Level Adjust Range:
Output Power:
Distortion:
Tweeter Dispersion(HxV):
Load Impedance:
Input Impedance:
Connectors:
Power Supply:
Dimensions(WxDxH mm/pcs):
Packing Dimensions(WxDxH mm/pcs)
Net Weight(Kg/pcs):
Gross Weight(Kg/pcs):
Built-in crossover two way full range active speaker
Line - 20KOhm, Microphone - 10KOhm
10"x1(Bass)
Line-0.02%, Microphone-0.04%
Treb - 8Ohm, Bass - 8 Ohm
1 x 34mm Driver
55Hz-18KHz
50Hz-18KHz
10dB(100Hz)- Bass
10dB(10KHz)- Treb
100W(Bass)+50W(Treb)
AC 115V/230V, 50/60Hz
325X308 mmX478
375X355X535mm
117dB
90 X60
XLR K3P
10.5Kg
11.8Kg
CLIP
VOLUME
LINE
BASS
MIC
LINE
MIC
INPUT
U10aU10a
ELECTRONIC COMPENSATION SPEAKER ELECTRONIC COMPENSATION SPEAKER
TREBLE
OUTPUT
POWER: 100W+50WPOWER: 100W+50W
ACTIVE 2 WAY FULL RANGE ACTIVE 2 WAY FULL RAN GE
U10a
115V/60Hz
R
Beta ThreeBeta Three
No:No:
230V
230V/50Hz
1. Volume control
2. Clip indicator.
3. Line input signal presence indicator.
4. Line/microphone selector.
5. Power supply input. Make sure that the
voltage selector is set for your country's
correct voltage.
6. 115V/230V voltage input selector.
7. Bass control.
Elder Audio ManufactoryElder Audio Manufactory
8. Treble control.
9. Microphone input signal presence
indicator.
10. Line/microphone output.
11. Line/microphone input.
12. Protection fuse. Use only fuses of the
correct amp rating.
13. Power ON/OFF switch.
Cosmetic changes may be made