Page 1
QS1000
U M - QS1000-20090831 verA
10" Two Way Full Range
Pro Speaker System
User Manual
Page 2
SAFETY INSTRUCTIONS
PLEASE READ THIS MANUAL FIRST
Thank you for a buying product. Read this manual first as it will help you operate the system properly. Please keep this manual
for future reference.
WARNING:
ATTENTION: Don't refit the system or spare parts without being authorized as this will .void the warranty
WARNING: Don't (such as candles) the equipment.place naked flames close to
Read the instruction first before using this product.
1.
Please keep this manual for future reference
2.
Pay attention to all warnings.
3.
Obey all operating instructions.
4.
Do not expose this product to rain or moisture.
5.
Clean this equipment with a dry cloth.
6.
Do not block any ventilation openings. Install according to instructions .
7.
Do not install this product near any heat source, such as , heater, burner, or any other equipment with heat radiation .
8.
Only use spare parts by manufacturer.
9.
Pay attention to the safety symbol on the of the cover.
10.
This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with
the product, please ensure they comply with the local safety codes.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important
operating and servicing instructions.
manual
manufacturer's
a
supplied the
outside
1
Page 3
QS1000
10" Two Way Full Range Pro Speaker System
CONTENT
CONTENT
INTRODUCTION
Features
Description
Applications
CONNECTION
Terminal Plate
System Connection Reference
INSTALLATION
Installation Accessories
Installation Reference
TECHNICAL SPECIFICATION
Technical Sheet
Frequency Response And Impedance Curve
2D Dimension
3
3
3
3
4
4
4
5
5
5
6
6
6
7
Product information subjects to be updated without
notification, please visit www.elderaudio.com for
latest update.
2
Page 4
INTRODUCTION
QS1000
10" Two Way Full Range Pro Speaker System
Features
Two new 4-inch paper cone mid-high frequency drivers.
10-inch paper cone low frequency driver.
High intensity injection moulding cabinet.
Dispersion 120 x 120 .
Frequency response 45 Hz 20k Hz (-3dB).
Sensitivity 90dB, Max SPL 111 dB.
3 x M8 hang point.
Customizable grill and cabinet color.
00
10" Two Way Full Range Pro Speaker System
QS1000
Description
QS1000 is a 10"2-way full range speaker system with wide
dispersion. Its sound is nature and clear while the cabinet
is handy, compact and the appearance elegant and
fashionable. It's applicable in small and medium performing
stages, KTV, multi-function halls as sound monitoring and
major and fill sound reinforcement.
QS1000 adopts two 4-inch new paper cone high frequency
speakers which greatly enhance the performance and power
loading capacity in the mid-high frequencies. The optimized
10-inch low frequency driver can realize highest clearance
and lowest distortion in high sound pressure. The 12 dB
attenuation slope cross frequency circuit enables smooth
frequency response. And the full range circuit protecting
system provides higher security.
The cabinet is injection moulded with high intensity
polypropylene. The delicate designed shape provides best
structure strength and acoustic characteristics. The colors
of grill and cabinet are available for customization.
.
.
.
Applications
KTV
QS1000 adopts multifunctional structure design. It's
applicable both in mobile and stage performance. Our
special designed accessories with the 3 x M8 hanging point
can be used in various installation requirements easily and
conveniently.
.
Monitor
Public Avenue
Small Performance
Multifunction Rooms
3
Page 5
QS1000
10" Two Way Full Range Pro Speaker System
QS 1000 connects the amplifier with a wire clamp. Two groups of parallel terminals enable it to connect to another speaker
conveniently.
Terminal Plate
CONNECTION
Red 1+ Black 1-
White 2+
Green 2-
System Connection Reference
CHA
BRIDGE IN
INPUT
SIGNAL GND
PIN1:
SIGNAL +
PIN2:
PIN3:
SIGNAL -
LF FILTER
MODE
BRIDGE
50HZ
PARALLEL
25HZ
5HZ
STEREO ON
CHB
Serial no:
CLIPLIMITER
OFF
OUTPUT ASSIGNMENT:
CHA:
PIN 1+ :
PIN 1 - :
PIN 2+ :
PIN 2 - :
BRIDGE MONO OUTPUT:
PIN1+ : SIGNAL
CHA :
CHA SIGNAL
CHA GND
CHB SIGNAL
CHB GND
GROUND
1+
1-
Crossover
2+
2-
-
A
+
CHA OUTPUT
+
OFF
ON
CHB:
-
BRIDGE
+
B
CHB SIGNAL
PIN 1+ :
-
CHB GND
PIN 1 - :
PIN 2+ :
PIN 2 - :
PIN2+ :
GND
CHB OUTPUT
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Special design for big power
POWER
CABLE
FUSE
+
LOW
-
+
HIGH
-
+
HIGH
-
QS1000 QS1000
Attention: The impedance of connected speaker must match the impedance of amplifier output.
Attention: Make sure the polarity of speaker and amplifier correctly.
4
Page 6
INSTALLA TION
10" Two Way Full Range Pro Speaker System
QS1000
Installation Accessories
QS1000 has 3 hanging points to work together with the
special designed accessories for fast and convenient
hanging, wall-mounting and on standing with adjustable
angles.
1. Hanging Bracket
2. Wall Bracket
Installation Reference
1. Ceiling
2. Wall
3. Standing Bracket
Warning: Make sure the mounting accessories
safety factor not less than 5:1 or meet the local
standard during installation .
3. Support
For 35 mm diameter tripod
5
Page 7
QS1000
10" Two Way Full Range Pro Speaker System
TECHNICAL SPECIFICATION
Technical Sheet
System:
Tweeter:
Woofer :
Frequency response(-3dB):
Frequency response(-10dB):
Sensitivity(1W@1m):
Max.SPL(1m):
Power:
Dispersion H V :
Rated impedance:
Crossover point:
Cabinet:
Mounting accessories:
Painting:
Connector:
Cabinet dimension:
(WDH)
Package dimension:
(WDH)
N.W.(pc):
G.W.(pc):
Two way full range speaker
2 4" High frequency drivers
1 10" Woofe r
1
45Hz-22kHz
40Hz-24kHz
2
90dB
3
117dB/123dB(PEAK)
150W (RMS)
4
300W (MUSIC)
600W (PEAK )
120 120
8 Ohms
1.2 kHz
Polypropylene injection moulding
3 M8 Bracket lifting point
Cabinet Exterior with/without
polyurethane spraying treatment
(depends on colors)Grill with cloth
Wire clamp
550mm 316mm 336mm
(21.5in 12.4in 13.2in)
620mm 385mm 425mm
(24.4in 15in 16.7in)
9kg(19.8 lb.)
11kg(24.3 lb.)
Speaker T esting Method
1. Frequency response
Use Pink noise to test the speaker in the anechoic room,
adjust the level to make the speaker work at its rated
impedance and the power output is 1W, then test the
frequency response 1m away from the speaker.
2. Sensitivity
Use full range Pink noise which was modified by EQ curve
to test the speaker in the anechoic room, enlarge the signal
to make the speaker work at its rated impedance and the
power output is 1W, then test the sensitivity 1m away from
the speaker.
3. MAX.SPL
Use full range Pink noise which was modified by EQ curve
to test the speaker in the anechoic room, enlarge the signal
to make the speaker work at its instant power output level,
then test the SPL 1m away from the speaker.
4. Rated Power
Use the pink noise according to IEC#268-5 to test the speaker,
enlarge the signal for continuous 100hours, the rated Power
is the power when the speaker will not incur hot damage or
mechanics damage.
Frequency Response And Impedance Curve
110
90
70
50
Sensitivity (dB)
30
10
20
50 100 200 500
6
Frequency response curve
Impedance curve
Frequency (Hz)
1k
2k
5k 10k 20k
316
100
10
3.16
Impedance (Ohms)
Page 8
TECHNICAL SPECIFICATION
2D Dimension
10" Two Way Full Range Pro Speaker System
QS1000
Toy view
Side view
Front view
Bottom view
Back view
7
Page 9
Notes:
Page 10
Loading...