
INCLUDED IN BOX
DMX-512 (1,3,8,24,28 CHANNELS)
SOUND ACTIVE (AUTO, STROBE)
STAND ALONE (AUTO, STROBE)
MASTER/SLAVE (SOUND ACTIVE,
AUTO)
QUICK SPECS
1 x OmniSistem LUMEG6
YOKE, KNOBS, SPACERS
POWER CORD
USER MANUAL
UNPACKING INSTRUCTIONS
Upon receiving the unit, unpack carton and verify that all parts have
been received in good condition. If there is an sign of damage to the
carton or unit due to shipping or mishandling, notify the shipper
immediately. Keep original packing materials in the event the unit
must be returned for any reason or recycle it when possible. All
fixtures must be returned in their original packaging.
In the unlikely even an accessory is missing that should have been
received with the unit or if something is wrong with the unit, notify
SAFETY INFORMATION
OmniSistem immediately WITHIN 3 DAYS of receiving the item. If
notification is not received within 3 days, unit is considered to have
been received with all components and without damage.
CONTACT US
6403 SOUTH 208TH STREET
KENT, WA 98032
TEL: 253-395-9500
FAX: 253-395-9494
WWW.OMNISISTEM.COM
OFFICE HOURS: MONDAY – FRIDAY 8AM - 5PM PST
TECHNICAL SUPPORT: M - F 9AM - 4PM PST
NOTE: INFORMATION ON RETURNING YOUR PRODUCT FOR
REPAIR IS ON THE WARRANTY PAGE.
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.
OmniSistem, 2012 OmniSistem, 2012
This unit is intended for indoor use only.
Ensure the power source is of the correct voltage for this fixture. Connect
power through a direct switch circuit, NOT a dimmer or variable circuit
source.
Do not install or operate the device in harmful environment conditions. (i.e.
extreme heat, cold, moisture or dust)
If the unit has been exposed to extreme environmental conditions or drastic
temperature fluctuations, ensure the unit is returned to room temperature
before operating.
Do not block fan or ventilation slots while operating unit.
Do not aim smoke or bubble effects near unit.
Do not operate the unit during thunderstorms.
Disconnect power prior to replacing fuse, servicing or cleaning unit.
Do not use solvents or abrasive cleaners to clean the unit. Use a damp cloth
only.
Modification(s) to the device or power cord will result in termination of the
dealer/manufacturer’s warranty.
Use safety cable for added security when installing the unit by the hanging
bracket.
Avoid direct eye contact with the light source.
Do not connect this unit to a dimmer pack.
Do not leave unit unattended while operating for extended periods of time or
overnight.

DISPLAY KEY
1CH, 3CH, 8CH, 24CH, 28CH
000-007 BLACK OUT
008-037 SHOW 1
038-067 SHOW 2
068-097 SHOW 3
098-127 SHOW 4
128-157 SHOW 5
158-187 SHOW 6
188-217 SHOW 7
218-247 SHOW 8
248-255 RANDOM SHOW 1-8
000-007 MANUAL
008-022 COLOR CHASE 1
023-037 COLOR CHASE 2
038-052 COLOR CHASE 3
053-067 COLOR CHASE 4
068-082 COLOR CHASE 5
083-097 COLOR CHASE 6
098-112 COLOR CHASE 7
113-127 COLOR CHASE 8
128-142 COLOR CHASE 9
143-157 COLOR CHASE 10
158-172 COLOR CHASE 11
173-187 COLOR CHASE 12
188-202 COLOR CHASE 13
203-217 COLOR CHASE 14
218-232 COLOR CHASE 15
233-247 COLOR CHASE 16
248-255 STAND ALONE
000-007 BLACK OUT
008-247 STROBE SLOW TO FAST
248-255 SOUND STROBE
000-007 NO FUNCTION
008-247 STROBE SLOW TO
FAST
248-255 SOUND STROBE
000-007 MANUAL
008-022 COLOR CHASE 1
023-037 COLOR CHASE 2
038-052 COLOR CHASE 3
053-067 COLOR CHASE 4
068-082 COLOR CHASE 5
083-097 COLOR CHASE 6
098-112 COLOR CHASE 7
113-127 COLOR CHASE 8
128-142 COLOR CHASE 9
143-157 COLOR CHASE 10
158-172 COLOR CHASE 11
173-187 COLOR CHASE 12
188-202 COLOR CHASE 13
203-217 COLOR CHASE 14
218-232 COLOR CHASE 15
233-247 COLOR CHASE 16
248-255 STAND ALONE
000-007 HOLD
008-255 SPEED SLOW TO FAST
000-255 DIMMER 0 – 100% RED 1
000-255 DIMMER 0 – 100% GREEN 1
000-255 DIMMER 0 – 100% BLUE 1
000-255 DIMMER 0 – 100% WHITE 1
000-255 DIMMER 0 – 100% RED 2
000-255 DIMMER 0 – 100% GREEN 2
000-255 DIMMER 0 – 100% BLUE 2
000-255 DIMMER 0 – 100% WHITE 2
000-255 DIMMER 0 – 100% RED 3
000-255 DIMMER 0 – 100% GREEN 3
000-255 DIMMER 0 – 100% BLUE 3
000-255 DIMMER 0 – 100% WHITE 3
000-255 DIMMER 0 – 100% RED 4
000-255 DIMMER 0 – 100% GREEN 4
000-255 DIMMER 0 – 100% BLUE 4
000-255 DIMMER 0 – 100% WHITE 4
000-255 DIMMER 0 – 100% RED 5
000-255 DIMMER 0 – 100% GREEN 5
000-255 DIMMER 0 – 100% BLUE 5
000-255 DIMMER 0 – 100% WHITE 5
000-255 DIMMER 0 – 100% RED 6
000-255 DIMMER 0 – 100% GREEN 6
000-255 DIMMER 0 – 100% BLUE 6
000-255 DIMMER 0 – 100% WHITE 6
000-007NO FUNCTION
008-247 STROBE SLOW TO FAST
248-255 SOUND STROBE
(SEE 8 CHANNEL MODE, CHANNEL 7)
000-007 HOLD
008-255 SPEED SLOW TO FAST
DMX CONTROL SETTINGS
1 CHANNEL MODE
3 CHANNEL MODE
24/28 CHANNEL MODE
8 CHANNEL MODE
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.
OmniSistem, 2012 OmniSistem, 2012

WARRANTY GUIDE - SERVICE AND REPAIRS
Thank you for choosing OmniSistem for your lighting and sound needs. The quality of
our products is our number one priority. In order to serve you better, we ask that you
carefully read through the warranty guide. Should you incur a problem with your
fixture, please call our office at 253.395.9500, our knowledgeable technical specialists
are available to assist you.
A. Our warranty is limited to manufacturing defects in material and workmanship
within the allotted time period. Warranty status is valid from the date of purchase.
OmniSistem Lighting: 1 Year Limited Warranty
OmniSistem LEDs: 1 Year Limited Warranty
OmniSistem Lasers: 1 Year Limited Warranty (Fixture), 180 Days (Diodes)
OmniSistem Beta Three® Sound: 1 Year Limited Warranty
OmniSistem Demo Products: 90 Days
B. Exclusions to warranty:
Parts designed to diminish over time including lamps, fuses, brushes,
contact rings, and lamp sockets.
Damage or failure caused by abuse, misuse, faulty installation and
operation, improper or inadequate maintenance, and any unauthorized
repair not carried out by OmniSistem or authorized dealer are excluded from
this warranty.
Accessories and/or peripheral equipment included with the product including
but not limited to: carry cases, cords, batteries, clamps, lamps and brackets
(unless otherwise specifically stated).
Any unit that has been modified from its original form.
C. For warranty service you must obtain a Return Authorization number (RA#) before
sending back the product by calling the OmniSistem repair department at
253.395.9500. Please visit the "Technical" section on our website
(www.omnisistem.com) and fill out the repair request form. Include this form inside
the box and write the RA# on the outside of the package.
D. Send a copy of your original purchase receipt along with the repair request form. It
is the original purchaser's responsibility to provide proof of purchase from an
authorized OmniSistem dealer. Units that were sold "as-is" or used are not covered
under OmniSistem's warranty program.
E. All shipping charges must be pre-paid. Items sent collect will be refused at
sender's expense. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, OmniSistem will pay return shipping charges
within the United States. For items that need to be expedited, OmniSistem will pay for
ground service and receiver will pay the difference between the services. If repairs fall
outside of the terms of this warranty, OmniSistem will return items COD (cashier's
check or money order only) via UPS ground service.
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.
OmniSistem, 2012 OmniSistem, 2012