OMNIREL OM5223SM, OM5222SM, OM5224SM, OM5221SM Datasheet
OM5221SM
COMMON
ANODE
COMMON
CATHODE
DOUBLER
1
3
2
1
3
2
1
2
3
OM5222SM
OM5223SM
OM5224SM
ISOLATED SURFACE MOUNT HIGH EFFICIENCY
CENTER-TAP RECTIFIER
Hermetic Surface Mount Package, 20 Amp,
50 To 200 Volts, 35 ns trr
FEATURES
• Hermetic Surface Mount Package
• Very Low Forward Voltage
• Very Fast Recovery Time
• Low Thermal Resistance
• Isolated Package
• High Surge
• Center-Tap Configuration
• Available Screened To MIL-S-19500, TX, TXV And S Levels
4 11 R0
DESCRIPTION
This series of products in a hermetic surface mount package is specifically designed
for use at power switching frequencies in excess of 100 kHz. The series combines
two high efficiency devices into one package, simplifying installation, reducing heat
sink hardware, and the need to obtain matched components. These devices are
ideally suited for Military applications where small size and a hermetically sealed
package are required. Common cathode is standard.
ABSOLUTE MAXIMUM RATINGS (Per Diode) T
= 25°C
C
Peak Inverse Voltage .............................................50 to 200 V
Maximum Average D.C. Output Current @ TC= 100° C......................10 A
Surge Current (Non-Repetitive 8.3 msec).................................180 A
Thermal Resistance, Junction-to-Case ..................................2° C/W
Operating and Storage Temperature Range ...................- 55° C to +150° C
Max. Lead Solder Temperature for 5 seconds ............................225° C
SCHEMATIC
1
3.2 - 53
1
3
3
OMXXXXDM
2
2 2
3
OMXXXXRM OMXXXXSM
For additional test conditions and limits, see Sect. 3.5, pg. 3.5 - 71.
Common cathode is standard. Contact factory for performance characteristics for common anode and doubler.
1
3.2
Loading...