OMNIREL JANTXV2N6770, JANTXV2N6768, JANTXV2N6764, JANTX2N6770, JANTX2N6768 Datasheet

...
0 (0)
OMNIREL JANTXV2N6770, JANTXV2N6768, JANTXV2N6764, JANTX2N6770, JANTX2N6768 Datasheet

2N6764,

JANTX2N6764,

JANTXV2N6764

2N6768,

JANTX2N6768,

JANTXV2N6768

2N6766,

JANTX2N6766,

JANTXV2N6766

2N6770,

JANTX2N6770,

JANTXV2N6770

 

 

 

 

 

 

JANTX, JANTXV POWER MOSFET IN TO-204 PACKAGE, QUALIFIED TO MIL-PRF-19500/543

100V Thru 500V, Up to 38A, N-Channel, Enhancement Mode MOSFET Power Transistor

FEATURES

Low RDS(on)

Ease of Paralleling

Qualified to MIL-PRF-19500/543

DESCRIPTION

This hermetically packaged QPL product features the latest advanced MOSFET technology. It is ideally suited for Military requirements where small size, high performance and high reliability are required, and in applications such as switching power supplies, motor controls, inverters, choppers, audio amplifiers and high energy pulse circuits.

PRIMARY ELECTRICAL CHARACTERISTICS @ TC = 25°C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PART NUMBER

 

 

 

VDS, Volts

 

RDS(on)

 

 

 

ID, Amps

 

 

 

 

 

2N6764

 

100

 

 

.055

 

 

 

 

 

 

38

 

 

 

 

 

 

 

 

 

 

 

 

2N6766

 

200

 

 

 

.085

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

2N6768

 

400

 

 

.30

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

 

2N6770

 

500

 

 

.40

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEMATIC

 

 

 

 

 

 

 

 

 

MECHANICAL OUTLINE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.197

 

 

 

 

 

 

 

 

 

 

 

 

1.53

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REF.

 

 

 

 

 

 

 

 

 

 

1.177

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.675

 

 

 

 

 

 

 

 

 

 

0.875

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.440

 

 

 

 

 

 

 

 

 

 

 

 

 

0.188 R.

 

 

 

 

 

 

 

 

 

 

0.655

 

 

 

 

 

 

 

 

 

MAX.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.420

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.135

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX.

0.450

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.250

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.312

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pin Connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.525 R.

Pin 1: Drain

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.043

 

 

 

0.225

0.161

 

 

 

 

 

 

 

 

Pin 2:

Source

 

SEATING

 

 

 

 

0.038

 

 

 

0.205

0.151

 

 

 

 

 

 

 

 

MAX.

Pin 3:

Gate

PLANE

2 PLCS.

Note: For part number 2N6764 and 2N6766 the mechanical dimensions are the same as above except the lead diameter is 0.058 min to 0.063 max.

7 03 R0

2N6764, JANTX2N6764, JANTXV2N6764

2N6768, JANTX2N6768, JANTXV2N6768

 

2N6766, JANTX2N6766, JANTXV2N6766

2N6770, JANTX2N6770, JANTXV2N6770

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

 

 

JANTXV, JANTX, 2N6764

Units

 

 

 

ID @

VGS = 10V, TC = 25°C

Continuous Drain Current

 

38

A

 

 

 

ID @

VGS = 10V, TC = 100°C

Continuous Drain Current

 

24

A

 

 

 

ID M

 

Pulsed Drain Current1

 

152

A

 

 

 

PD @

TC = 25°C

Maximum Power Dissipation

 

150

W

 

 

 

 

 

Linear Derating Factor

 

1.2

W/°C

 

 

 

VG S

 

Gate-Source Voltage

 

± 20

V

 

 

 

EAS

 

Single Pulse Avalanche Energy 2

 

150 4

mJ

 

 

 

IA R

 

Avalanche Current1

 

38 4

A

 

 

 

TJ

 

Operating Junction

 

-55 to 150

°C

 

 

 

TSTG

 

Storage Temperature Range

 

 

 

 

 

 

 

 

 

 

 

 

 

Lead Temperature

 

300(.06 from case for 10 sec)

°C

 

 

 

 

 

 

 

 

 

 

 

ELECTRICAL CHARACTERISTICS @ TJ = 25°C (Unless Otherwise Specified)

 

Parameter

Min.

Typ.

Max.

Units

Test Conditions

 

 

 

 

 

 

 

BVDSS

Drain-Source

100

 

 

V

VG S =0V,ID =1.0 mA,

 

Breakdown Voltage

 

 

 

 

 

RDS(on)

Static Drain-to-Source

-

-

0.055

 

VG S =10V,ID = 24 A 3

 

On-State Resistance

-

-

0.065

 

VG S =10V,ID = 38 A 3

VGS(th)

Gate Threshold Voltage

2.0

-

4.0

V

VDS = VG S,ID = 250 µA

IDSS

Zero Gate Voltage Drain

-

-

25

µA

VDS = 80 V, VG S = 0V

 

Current

-

-

250

VDS = 80 V, VG S = 0V, TJ = 125°C

 

 

IGSS

Gate -to-Source Leakage Forward

-

-

100

nA

VG S = 20 V

IGSS

Gate -to-Source Leakage Reverse

-

-

-100

nA

VG S = -20 V

QG(on)

On-state Gate Charge

50

-

125

nC

VG S =10V,ID = 38A

QG S

Gate-to-Source Charge

8

-

22

nC

VDS = 50 V

QGd

Gate-to-Drain (“Miller”) Charge

25

-

65

nC

See note 4

tD(on)

Turn-On Delay Time

-

-

35

ns

VD D =50V,ID = 38A, RG =2.35

tr

Rise Time

-

-

190

ns

See note 4

tD(off)

Turn-Off Delay Time

-

-

170

ns

 

tr

Fall Time

-

-

130

ns

 

Source-Drain Diode Ratings and Characteristics

 

 

 

 

 

Parameter

Min.

Typ.

Max.

Units

Test Conditions

VSD

Diode Forward Voltage

-

-

1.9

V

TJ = 25°C, IS = 38A 3,VG S = 0 V

ttr

Reverse Recovery Time

-

-

500

ns

TJ = 25°C, IF= 38A,di/dt< 100A/µs 3

Thermal Resistance

 

 

 

 

 

 

Parameter

Min.

Typ.

Max.

Units

Test Conditions

RthJC

Junction-to-Case

-

-

0.83

 

Mounting surface flat,

RthCS

Case-to-sink

-

0.21

-

°C/W

smooth, and greased

RthJA

Junction-to-Ambient

-

-

48

 

Typical socket mount

1. Repetitive Rating: Pulse width limited by maximum junction temperature.

 

2. @VD D= 50V, Starting TJ = 25°C, L = 100 µH + 10%, RG = 25

, Peak IL = 38A

 

3.Pulse width < 300 µs; Duty Cycle < 2 %

4.See MIL-S-19500/543

205 Crawford Street, Leominster, MA 01453 USA (508) 534-5776 FAX (508) 537-4246

Loading...
+ 3 hidden pages