Omnicron electronics Digital Recorder Accessories Catalogue

Digital Recorder Accessories

Digital Recorders from Omnicron

come with cables & accessories

suitable for most installations.

The items on this page are for

replacement of the supplied

cables, or applications requiring

different cables or adapters.

Contact your Omnicron sales

representative for assistance in

selecting accessories, cables, or

adapters for your application.

Voice Logging Recorders and

accessories have been our

specialty since 1975.

B

T-18 Telephone cable with RJ-11 plugs

on both ends. This multi-purpose cable as­sembly can be used to connect between two
RJ-11 or RJ-14 phone jacks. It is 18’ long and
comes with a T adapter. The T adapter is used
when you do not have an extra jack for the
cable connection. It will convert a single phone
jack into two parallel jacks.

T25-EXT Twenty-five foot phone line

extension cable. It has an RJ-11 plug on one
end and an RJ-11 jack on the other end. It is
used to extend a phone jack or connection.

RJ14-S Two line cable assembly.

The RJ14-S is used to separate two line RJ-14
phone

jacks (L1+L2) into individual RJ-11 jacks

or plugs. It can also be used to combine two
phone lines from two separate RJ-11 jacks or
cables onto a single RJ-14 plug.

TSA-3LM The easiest way to

monitor conversations on individual
telephones. The TSA-3LM is used to

provide a simple method of connecting
supervisory monitoring equipment to
telephone handset or headset audio.

It can be used with most telephone styles
that have a standard modular handset or
headset jack. Simply connect one end of
the cable in series with the telephone
handset or headset cord and plug the
other end of it into your recorder. The
TSA-3LM has a 25’ output cable that can
be extended with the T25-EXT.

TSA-CHH Similar to TSA-3LM.

Used to provide an inexpensive method of
connecting supervisory monitoring equip­ment (such as our Total Recall) to a tele­phone that uses built-in switching between
handset and headset jacks. It combines the
audio to a single 25’ output so that you will
be able to monitor or record conversations
from both the handset and headset.

TSA-SLM Telephone supervisory

adapter with switch. The TSA-SLM pro-

vides all of the functions and features of the
TSA-3LM with the addition of an ON/OFF
switch that is used to disconnect the tele­phone audio from your recorder when you
do not want your conversation recorded.
The TSA-SLM has a 25’ output cable that
can be extended with the T25-EXT.

RSA-M3

radio receive and transmit audio. The RSA­M3 is used to provide an inexpensive method
of connecting voice logging recorders to two­way radio base stations and local control
points. Input levels are compatible with Mo­torola Radius series radios or similar.

.

The RSA-M3 combines receive and transmit
audio at levels matched to the line input of
voice logging recorders. It also provides trans­former isolation and RF bypass. Use it to sim­plify installation when a direct connection to
the radio's receive and transmit audio will be
made by a radio service technician. The RSA
adapters are not needed when connecting to
remote controlled radios (tone, DC, or local).

Adapter for mixing two-way

RSA-M4 Two-way radio adapter with

a relay that switches between receive and
transmit audio. Similar to RSA-M3 (above),

the

RSA-M4 has a relay that connects to 12vDC

transmitter power and an audio transformer to
boost the volume of transmitter audio that is
fed to the recorder. The relay is used to switch
its RJ-11 audio output jack from receive audio
to transmit audio whenever the radio is trans­mitting. Installation by a radio service techni­cian is required.

TSB-6 Telephone line switch box.

Connects in series with the phone cable
feeding your recorder. With its ON/OFF
switch in the OFF position, the output RJ-11
jack is disconnected from the input RJ-11
jack. Includes a six foot phone cable.

OVER

Digital Recorder Accessories

Digital Recorder Accessories

Digital Recorders from Omnicron

come with cables and accessories

suitable for most installations.
The items on this page are for

unusual applications that require

different adapters or cables.

MOD-SC Converts modular phone

cable to mini-plug. The MOD-SC is used
when you have a cable with a standard RJ-11
single-line telephone type plug that you need
to connect to equipment with a 3.5mm mini­plug jack. It has an RJ-11 jack on one end
and a 3.5mm mini-plug on the other end.
The MOD-SC is typically used to connect
cables provided with digital recorders such as
our Total Recall and TeleCorder, to the audio
output of a radio receiver.

(continued)

TC-100P Telephone handset

adapter with DTMF encoder. Similar to
other logger patches that connect in series
with the handset or headset cord of a digital
phone, the TC-100P provides audio output
for recording. It also provides a touch tone
keypad

to send DTMF digits to your recorder,

along with the conversations,
fier to boost weak audio.
Most digital phones do not produce
DTMF tones. With the TC-100P connected
to your digital phone, the recorder will de­tect any numbers you enter on its keypad
during a recording and display them just as
if you were using an analog phone. Includes
two memory keys for pre-stored numbers,
AC power adapter (15vDC) and a cable to
connect it to the handset of the phone.
Weight: 15 oz.; Size: 3” W x 4.9” D x 1.4” H.

and an ampli-

MTJ-S2 Converts 2-line RJ-14 jacks

into two separate RJ-11 single line phone
jacks. This adapter/cable-assembly splits a

2-line RJ-14 circuit/jack into two RJ-11 jacks
(Line-1 and Line-2). Typically used with the
RJ-14 input jacks on some Total Recall and

TeleCorder recorders from Omnicron.

RSA-2A1 Line level audio mixer,

two inputs — one output. Used in applica­tions where audio from two isolated line level
sources, such as remote controlled 2-way
radio circuits, must be combined into a single
audio output. The mixed audio can be fed to
the input of a voice logging recorder so that
both audio sources will be recorded on a
single channel.
It provides balanced line-input, transformer
isolation, capacitive coupling, and RF bypass.
High impedance input circuits permit connec­tion

to balanced and unbalanced audio sources

with minimal loading. Each channel has an
independent audio level adjustment. Includes
AC power adapter.

Contact your Omnicron

representative for assistance in

TSA-MRS Telephone handset supervisory adapter — with proximity switch audio

muting. The TSA-MRS has a small proximity sensing magnetic reed switch that is used to mute
handset audio when a small magnet (mounts on the handset of your phone) is within 1/2” of the
sensing switch that mounts on your phone. Used in rare cases where handset audio is not muted
when your phone is hung-up and the standard TSA-3LM cannot be used satisfactorily.

selecting the proper cables or

adapters for your application.
Voice Loggers have been our

specialty since 1975.

0402102005

Additional information is also available at :

OMNICRON ELECTRONICS www.omnicronelectronics.com

581 Liberty Highway z P.O. Box 623 z Putnam, CT 06260-0623 z [phone] z FAX [phone]