OmniBlend I, III, V Owner's Manual

1

OWNER’S MANUAL

OmniBlend I

OmniBlend (Pty) Ltd

SOUTH AFRICA

www.omniblend.co.za

Read and save these instructions

2

Table of Contents

LET’S GET STARTED 3

SERVICE & REGISTRATION 4

IMPORTANT SAFEGUARDS 5

PARTS & FEATURES 9

ABOUT THE BLADES 12

HOW TO USE THE TAMPER? 13

CONTROL PANEL 15

HINTS FOR SETTING SPEEDS 15

CARE AND CLEANING 17

SPECIFICATIONS 19

3

LET’S GET STARTED

CONGRATULATIONS!

You are about to see how quick, easy, and delicious healthy eating can be! We hope that you’ll find the information in
this step-by-step guide to be useful and beneficial. The possibilities are endless, and we know you will enjoy your new
OmniBlend lifestyle!

Please read all the safety information, warnings, and instructional material found in this booklet before getting started. Set
your OmniBlend machine on a dry, level surface. Make sure that the power switch is set to Off, and that the machine is
plugged into a grounded electrical outlet. Then, follow the cleaning instructions on page 17 to prepare your machine for
use. Always clean your machine before the first use.

4

SERVICE & REGISTRATION

OMNIBLEND SERVICE

Record the serial number of your OmniBlend on the warranty form provided with the machine for future reference. These
numbers can be found on the back of the motor base.

Before returning this product for any reason, including repair, first contact OmniBlend Customer Service at
021 012 5999, email [e-mail], or contact your local dealer.

PRODUCT REGISTRATION

Enjoy faster and easier service in the future by taking a few minutes to register your OmniBlend machine today.

Choose one of these 2 easy ways to register your machine:

1. Online at www.omniblend.co.za/pages/product-registration-form

2. Email [e-mail]

Failure to register your machine will not diminish your warranty rights.

5

IMPORTANT SAFEGUARDS

To avoid the risk of serious injury when using your OmniBlend blender, basic safety precautions should be followed,
including the following.

IMPORTANT INSTRUCTIONS FOR SAFE USE

Do not leave your OmniBlend blender unattended when operating. In case of a technical failure, contact OmniBlend for
any repairs or servicing requirements.

WARNING

Electrical Shock Hazard.

Use grounded outlet only.

DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death or electrical shock.

AUTOMATIC OVERLOAD PROTECTION

Your OmniBlend machine is equipped with a special feature: Automatic Overload Protection. This built-in feature is

designed to protect the motor and prevent your machine from overheating. That means peace of mind for you as an

6

OmniBlend owner. If the Overload Protection kicks in, the machine will stop operating suddenly. Leave the machine to
cool down for 5 to 10 minutes, and then (while the machine is still connected to power), press the Overload Button on the
bottom of the machine. The machine will now work as normal again.

WARNING

To Avoid Injury.
Read and understand instruction manual before using this machine.

READ ALL INSTRUCTIONS AND SAFEGUARDS BEFORE OPERATING BLENDER.

1. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack

of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or
incapacitated persons.

2. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.

3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

4. Avoid contacting moving parts.