Omneon SystemManager NSM-2007, SystemManager NSM-2007K, SystemManager NSM-2012, SystemManager NSM-2012K Quick Reference Manual
SystemManager NSM-2007/NSM-2007K Platform
Front Panel Components
Quick Reference Guide
6
2
1
3
1 Power on Indicator/Button
2 NMI Button
3 Video Connector
4 Hard Drive Indicator
Rear Panel Components
5
4
1 2 3 4
7
8
9
5 Diagnostic Indicator Lights
6 System Status Indicator
9 System ID Panel
10 Optical Drive
10
7 System ID Button
8 USB Connectors
1 2
1 Serial Connector
2 Video Connector
3 eSATA Connector
4 USB Connectors (2)
Omneon Technical Support: 888 686-7781 (Americas), +65 6542 0050 (Asia Pacific), + 44 1256 347 401 (EMEA),
+7 495 506-5981 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 6581 9198 (China, mainland)
9
3
5
6
4
7
5 NIC 1
6 NIC 2
7 System Status Indicator
10
8
9 System ID Connector
10 Power Supply
11 Retention Clip
11
8 System ID Button
28-0142 Rev. D
Keyboard and Monitor Tray, Front /Rear View
1 Rack Rails
2 Tilt-up LCD Monitor
3 LCD Monitor Controls
4 Keyboard
5 Keyboard/Monitor Tray
Front and Rear Panel LEDs
Front Panel Indicators
System Status Indicator (front and rear panels)
Hard Drive Activity Indicator:
lights when hard drive is in use.
Power on Indicator/Button:
lights when system power is on.
1 Power On/Off Switch
2 AC IN
3 Video Connector
Diagnostic Indicator Lights:
refer to the Omneon SystemManager Installation Guide for details.
System Status Indicator: see below.
1 2 3 4
Light Blue
[Solid] Normal system operation
NIC Indicators (rear panel)
Link indicator
Activity indicator
Omneon Technical Support: 888 686-7781 (Americas), +65 6542 0050 (Asia Pacific), + 44 1256 347 401 (EMEA),
+7 495 506-5981 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 6581 9198 (China, mainland)
Amber
NIC Indicator Codes
[Link indicator is green] The NIC is connected to a valid network link at 1000 Mbps.
[Link indicator is amber] The NIC is connected to a valid network link at 10/100 Mbps.
[Activity indicator is amber blinking] Network data is being sent or received.
[Link and Activity indicators are off] The NIC is not connected to the network.
[Solid] System needs attention. Note the diagnostic indicator lights will display
an error code.
28-0142 Rev.D
Loading...