Omker DCK-658, DCK-668, DCK-678, DCK-688 Owner's Manual

Installation Manual and Owner’s Guide

PLEASE READ THE MANUAL CAREFULLY BEFORE

INSTALLATION AND OPERATION

2

Safeties & Cautions:

DCK series door machine need professional technician for the installation:

（1）All the operations must be implemented according to the instructions, this is very

important to personal safety. Improper installation or misuse of the product might cause
series damage to personal and property.

（2）Please read instructions carefully before installation.
（3）Installation and machine fittings must comply with standards related.
（4）Power supply should be consistent with the requirements of the machine and well

grounding. Electric leakage as well as circuit short protection device should be equipped.

（5）Before system maintenance, cut off the power , and check if the grounding is well

connected

（6）

Strongly recommended to install safety devices(such as infrared protection),and take

frequent check to ensure normal work.

（7）Our company is out of responsibility for any operation or use violating the instructions.
（8）Our company is out of responsibility for the consequences caused by user’s ignoring the

process requirements of precision components during operation.

（9）

Our product is in strict accordance with the instructions for the design and manufacture.

Any violation of the instructions may damage the product or cause danger.

（10）

Our company shall not be responsible for safety problems caused by using fittings that

isn’t produced by our company.

（11）

Any attempts to change the structure of the components is forbidden.

（12）

The installation personnel should give detailed operation methods to the users as well as

the regulations under emergency, also the “instructions ”should offered.

（13）During installation, keep the children and other unrelated person away from the

installation site.

（14）Before electric control system operate, remove all the barriers within the door covering

area and any vehicles or person are forbidden to pass.

（15）Both the installation position and height of main control box should be proper, do not be

exposed to sunlight and rain, forbidden to let children to operate the remote control as

well as control panel switch.

（16）

If it is necessary to install a outer shield, consider that if it may shield signal of the remote

control.

（17）

Place the remote control out of the reach of children in case of accident.

（18）

Any attempts to dismantle this machine privately is forbidden, please contact professional

technician.

（

19) Please save the instructions properly for future use.

3

Ⅰ.Product introduction:

EXTERNAL SIZE(Fig.1)

Function & Characteristic:

①Install overheat protector in AC motor. The motor will cut off power automatically when the

temperature reach rated power after a long time working, in order to extend the using life of
motor.

②The product has speedy clutch, inset the release key and turn it 100 degrees to release the

clutch when power off,to realized manual operation.(Fig.2)



Machine running smoothly, parking without inertia, accurate position.

Fig.2