SPECIFICATIONS
Operating voltage
8-11 volt
Power consumption:
During standby with six charged receivers
145 mA max.
During the charge of six receivers
600 mA max.
Max. charging current for each receiver:
NiCd
18 - 32 mA
NiMh
45 - 83 mA
Charging time:
14 - 16 uur
Dimensions (H x L x W)
62 × 82 × 203 mm
Weight (including power supply adapter)
870 gram
Declaration of conformity
Hereby we declare that the followig product:
Omikron CallHelp 400 C6
fulfils all product standards, tests and safety requirements according to the
guidelines 1995/5/EG (R&TTE-RL) .
Product description: Six fold desktop charging unit
Omikron Europe B.V.
Kolenbranderstraat 20D
2984 AT Ridderkerk
The Netherlands
tel. 00 31 (0) 180 - 417011
fax. 00 31 (0) 180 - 461213
web:
http://www.omikron-europe.com/
e-mail:
mailto:info@omikron-europe.com
Ridderkerk, 01.06.2004
A.M. de Raadt
Instruction Manual
Omikron CallHelp 400 C6
DESKTOPCHARGER
Read this manual carefully before you start using this product.
For all items regarding the maintenance and use of this product not
mentioned in this manual you should contact you supllier.
-4-
-1-
Your desktop charger Omikron
CallHelp 400C6 is specially designed
for the charging of the Omikron
CallHelp 400RX call receivers.
Maximum six receivers can be
charged at the same time by placing
them in the charge compartments.
The batteries can be fully charged in
14 hours.
CHARACTERISTICS
Charging switch NiCd/NiMh
With this switch, you can adjust
whether you can charge the receivers
when supplied with NiCd batteries or
with NiMh batteries.
Six charge compartments
You can charge maximum six
receivers at the same time.
Automatic charge
The C6 begins to charge
automatically when a receiver is
being placed in a charge unit
Time limitation
The charging stops automatically
after 14 to 16 hours.
Charge indicator
Will turn into red when the charging
process is in function and it turns into
green when the charging process is
completed.
SETUP OF TYPE OF BATTERY
Before you charge the batteries, the
C6 has to be setup to the type of
battery that is placed in the receiver:
This is done by placing the slide
switch NiCd/NiMh in the position
suitable to the type of battery.
Important:
Place no receiver with non
rechargable, mixed batteries or
different capacities together in the
charger.
Never charge receivers that work
with NiCd batteries while the switch
NiCd/NiMh indicates NiMh. This
can cause the batteries and the
receiver serious damage.
CHARGING RECEIVERS
The receivers CallHelp 400RX have
to be charged only when the
receiver’s indicator “battery low” is
activated. The batteries are then
almost empty and the receiver will
beep every five minutes. If you press
the on/off switch of the receiver, a
“b” will appear on the display.
1. Place the receiver, either
equipped with 2 NiCd
batteries or with 2 NiMh
batteries, in one of the
charge compartments. The
LED indicator is first green
and then it turn into red.
2. The batteries are charged in
14-16 hours. The charge
indicator will turn into green
with the charge process is
completed.
REMARKS
Charge only empty receivers
During the charge, please do
not take out the receiver
from the charge unit to place
it back immediately after. By
doing this, the charge cycle
starts again causing damage
to the batteries and to the
receiver.
If you have question or
something is unclear, please
contact your supplier.
MAINTENANCE
This device has to be used
only indoors.
Please use the charger only
in a dry environment at room
temperature.
Please handle this charger
carefully. Don’t let it fall.
Keep the charger free of
dust , moisture and dirt.
Keep this manual carefully.
The charger contains no elements
that can be adjusted by the user.
The unauthorized opening of the
charger leads to the expiry of the
guarantee.
-2-
-3-
Loading...