OMG RhinoBond RBHW1 Owner's Manual

Non-penetrating fastening system
for commercial roofing

®

OWNER’S MANUAL

RB1030 Rev. 05032018

153 BOWLES ROAD, AGAWAM, MA 01001 USA

800.633.3800 413.789.0252 RHINOBOND.COM

IMPORTANT!

Save this manual

and read it in full

before use.

TABLE OF CONTENTS

2 RhinoBond Tool Warranty

3 System Description

-System Components

-Power Requirements Chart
Safety Instructions

4 Operating Instructions and
Power Requirements

6 Maintenance & Storage

7 CE Declaration of Conformity

RHINOBOND RESOURCES ON LINE!

We have a dedicated online resource

site where all important RhinoBond

information is kept, including manuals,

tips, videos, best practices, the Rhino

calculator and much more!

RhinoBondResources.com

The RhinoBond system uses Sinch technology to create a strong bond between the roof membrane
and fastening plates.

© Copyright 2018 OMG, Inc. All rights Reserved.

THE RHINOBOND HAND WELDER WARRANTY

The RhinoBond Hand Welder is guaranteed for 25,000 cycles of operation,
or one year from date of purchase, whichever comes first.

During this period OMG, Inc., at its option, will repair or replace any tool for the
roofing contractor who originally purchased the tool. This will be done free of
charge, provided the tool is determined defective in materials or workmanship
upon examination by an Authorized RhinoBond System Service Technician.

This Warranty will be honored only if:

A. No evidence of abuse, misuse or failure to follow safety or operating

instructions, or improper maintenance or modification of the tool, is present.
Read Owner's Manual for safe use and maintenance instructions.

B. If replacement is necessary, the original purchaser should return the tool,

transportation prepaid, to the nearest Authorized RhinoBond System Service
Technician with a copy of the original purchase receipt or other positive proof
of purchase.

C. Only genuine RhinoBond Tools, Fasteners and Plates are used in the application.

For RhinoBond Tool Service, please call: 800-633-3800

International: [phone]

ROOFTOP SAFETY

In addition to the safety instructions in this manual, OMG Roofing Products recommends that all roof top workers follow the safety
guidelines outlined in the OSHA booklet called "Protecting Roofing Workers" available at www.osha.gov/Publications/OSHA3755.pdf
and EU-OSHA “Directive 92/57/EEC - Temporary or mobile construction sites,” if applicable.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES.
ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL NOT
APPLY. THESE OTHER EXPRESS OR IMPLIED WARRANTIES ARE SPECIFICALLY
EXCLUDED. BUYER’S OR USER’S REMEDIES ARE SOLELY AND EXCLUSIVELY
AS STATED HEREIN. OMG, INC. SHALL IN NO EVENT BE LIABLE FOR
INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SPECIAL DAMAGES RESULTING
FROM FAILURE OF THIS WARRANTY. IN NO EVENT, WHETHER AS A RESULT
OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE)
OR OTHERWISE, SHALL OMG, INC.’S LIABILITY TO THE BUYER OR USER OF
THE TOOL OR ANY LOSS OR DAMAGE ARISING OUT OF THE BREACH OF
WARRANTY, CONTRACT OR TORT, EXCEED THE PURCHASE PRICE HEREIN.
ANY CLAIM OR LIABILITY SHALL IN ANY EVENT TERMINATE UPON THE
EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.

RhinoBond Hand Welder Owner’s Manual Page 2

THE RHINOBOND HAND WELDER

READ & SAVE ALL INSTRUCTIONS

WARNING

Activation Button

Energy Setting

Dial

Induction Coil

Centering Mark

Heat Sinks

(3 included)

(Magnet design may vary)

Handle

LED Control

Lights

Extension Cord

(Sold Separately)

(12 gage, 100-ft./30m max)

Power

Cord

The RhinoBond System produces
heat that can seriously injure
people and damage metal
objects. Please be sure that you

and your crew members read and
understand all instructions in this
manual before attempting to use
the RhinoBond System. Failure to
follow all instructions could result
in property damage, serious

personal injury, electric shock
or death.

This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety. Children should be
supervised to ensure that they do
not play with the appliance.

DO NOT USE THIS TOOL if you
have (or anyone near you has) a

pacemaker, surgical implant,
prosthesis or other medical
device. The RhinoBond tool may

interfere with proper medical
device operation.

DO NOT activate tool over metal
objects in/on the floor.

DO NOT use the cord to carry
the tool.

UNPLUG THE CORD before
attempting to inspect or clean the
tool, or you risk electric shock.

Make sure power/extension cords

do not create a trip hazard.

DO NOT activate tool over the

power cord.

KEEP CORD AWAY FROM heat,
liquids, sharp edges and moving
parts.

STAY ALERT. Do not use this tool
when tired or under the influence of
drugs, alcohol or medication that can
alter your awareness.

DO NOT hold any objects containing
metal in the direct proximity of
the inductor during use, including
watches, jewelry, keys, mobile
phones, etc.

IF CORD IS DAMAGED,
immediately discontinue using the
tool and contact OMG Roofing
Products for re pair.
800-633-3800 ([phone])

POWER REQUIREMENTS CHART

REGION USA / CANADA UK / IRELAND

POWER REQUIRMENTS

EXTENSION CORD

PORTABLE GENERATOR

POWER SOURCE

RHINOBOND TOOLS PER

GENERATOR *

See page 7 for country specific plug adapters.

110-120V / 20A / 50-60Hz 110-220V / 16A / 50-60Hz 220-230V / 10A / 50-60Hz 220V / 50Hz

12 gauge (min.), 100-ft. (max.) 110V, 2.5mm X 30m 16A (230V 3x15), 30m 10A, 30m

5,000W min. with

20A GFCI Circuit

2 1 1 1

NETHERLANDS

AND REST OF EUROPE

2.5 KVA min. with 16Amp
(110V) protected circuit

2.5 KVA min. with 10Amp
(230V) protected circuit

RhinoBond Hand Welder Owner’s Manual Page 3

CHINA

Honda EU20i 1.6 KVA with 8 Amp

(230V) protected circuit