
Instruction Manual
Omegon® Advanced Finderscope Base
Congratulations on the purchase of the new Omegon Advanced
Finderscope Base. This base is compatible with Omegon Advanced
telescopes (203 and 153mm) and also some telescope models made by
Bresser and Meade. It includes the base and the Vixen/Synta compatible
finder shoe. It allows the use of Vixen/Synta-type dovetails with these
telescopes.
1. Included Accessories
Included is the tube base and the Vixen/Synta-type
finderscope shoe/base.
2. Getting Started
2.1. Remove the original finderscope base.
2.2. Place the tube base on the tube as shown. Use
the screws and nuts from the original finderscope
base to fix it (screws and nuts not included).
2.3. Place the finderscope shoe on top of the tube
base. Use a Philips screw driver to fix it to the tube
base. Make sure all screws are well tightened.
You are now ready to use the Vixen/Synta-type
compatible finderscope with your Omegon Advanced
telescope.
3. Parts and features
1. Finderscope fixing thumbscrew;
2. Finderscope shoe’s fixing screws;
3. Tube base;
Questions?
http://www.astroshop.eu
nimax Gmbh Otto-Lilienthal-Str. 9
D-86899 Landsberg am Lech
English version 10.2014 REV A IN 637