POWER SUPPLIES
FOR PROCESS LOOPS AND TRANSMITTERS
PSR Series
U24Y175 shown
smaller than actual size.
U Rugged Power
Supplies for
Transducers
and Transmitters
U 24 Vdc Regulated or
48 Vdc Unregulated
U Economical Low
Cost Solution
SPECIFICATIONS
U24Y175
Input: 105 to 125 or 210 to 250 Vac,
user selectable
Operating Range: -10 to 65°C
(14 to 150°F)
U48Y40 shown smaller
than actual size.
PSR-24L
shown smaller
than actual size.
PSR-24S
shown smaller
than actual size.
Storage Temperature: -55 to 85°C
(-67 to 185°F)
Output: 24 Vdc at 175 mA max
Line and Load Regulation: ±0.1%
Ripple and Noise: 3 mV RMS
Temperature Coefficient:
±0.2% per °C
Dimensions: 69 H x 76 W x 25 mm D
(2.7 x 3.0 x 1")
Output Protection: Current limited,
overvoltage
Voltage Isolation: 1500 Vac
Weight: 283 g (10 oz)
Regulated PSR Series
Input: 115V or 230 Vac models
PSR-24S Dimensions:
56 L x 49 W x 81 mm H
(2.2 x 1.9 x 3.2")
U48Y40
Input: 110 Vac
Output: 48 Vdc at 400 mA
Operating Range: -10 to 65°C
(14 to 150°F)
Dimensions: 114 H x 130 W x 87 mm D
(4.49 x 5.12 x 3.44")
ACCESSORIES
C
To Order Visit omega.com/psr-24s for Pricing and Details
POWER INPUT OUTPUT
MODEL NO. SUPPLY POWER V MA TERMINATION
PSR-24S Regulated 115 Vac 24 Vdc 400 mA Screw terminals
PSR-24L Regulated 115 Vac 24 Vdc 400 mA 1.8 m (6') cord, stripped leads
PSR-24L-230 Regulated 230 Vac, CE 24 Vdc 400 mA 1.8 m (6') cord, stripped leads
U24Y175 Regulated 115/230 Vac 24 Vdc 175 mA Screw terminals
U48Y40 Unregulated 110 Vac 48 Vdc 400 mA Screw terminals
ACCESSORY
MODEL NO. DESCRIPTION
POWER CORD-SE Power cord with stripped end termination
Comes complete with operator’s manual.
Ordering Example: PSR-24L, 24 Vdc @ 400 mA power supply, with cord and stripped leads.
C-16