Omega Products TXDIN1610 User Manual

Universal DIN Rail
Transmitter

Free Software*
Download, Visit
omega.com/ftp

TXDIN1600 Series

U Simple Configuration

Via USB Port

U Universal Pt100,

Thermocouple, mV,
mA Input

U Isolated Input
TXDIN1610

U Pushbutton User Trim
U 4 to 20 mA, 2-Wire Output

TXDIN1620

U Pushbutton User Trim
U 3-Wire Isolated

Voltage Output

TXDIN1630
U Dual Relay Outputs

250 Vac 1 Amp

U Relay Isolated From

Each Other

Shown actual size.

TXDIN1620

TXDIN1630

TXDIN1610

The TXDIN1600 Series is a new
generation DIN rail mounted
temperature transmitter. It has been
designed to accept most common
process and temperature sensor
inputs and provide the user with a
standard two wire 4 to 20 mA output
signal. Isolation is provided between
input and output and all temperature
ranges are linear to temperature.

Designed for ease of use, our latest
USB interface is fitted for quick and
easy configuration. Just connect a
standard USB cable between the
TXDIN1600 and your PC. Using our
free configuration software, your PC
will automatically upload the existing
configuration data and guide you
through any changes you wish to
make. To further help save time, the
TXDIN1600 does not need to be
wired to a power supply during the
configuration process, it is powered
via the USB interface from your PC.

The TXDIN1600 is also provided
with user pushbutton trim, allowing
trim adjustments at both 4 mA and
20 mA. The user trim function can
be locked during configuration if not
required. The range led indicates
out of range input during normal
operation, during user trim it is used
to indicate the stage of trim.

Specifications

Isolation: Input to output tested at

500 Vdc
Ambient: Operating -20 to 70°C
(-4 to 158°F) 10 to 95% RH
non-condensing

Storage: -40 to 85°C (-40 to 185°F)
Approvals: CE tested to BS EN 61326
Dimensions: 17.5 W x 56.4 D x 90 mm L

(0.7 x 2.2 x 3.5")

Material: Polmide 6.6
Self Extinguishing
Terminals: Screw terminal
Cable: 2.5 mm (0.1") max
Color: Gray

N-23

Output

TXDIN1610
Type: 2-wire current sink; signal range

4 to 20 mA; full range 3.8 to 24 mA
Supply: 11 to 30 Vdc, 24V nominal
giving max loop load of 600 R @ 24V
Response Time: <500 ms to reach
95% of final value; start up time <3 s

Calibration Accuracy: ±5 uA
Loop Effects: Loop ripple 0.03% of

FSR; supply sensitivity 0.05 uA/°C;
supply ripple rejection <±5 uA error
@ 1V rms 50 Hz ripple
Protection: Reverse connection and
over-voltage protection, max over
voltage current 100 mA

Requires USB cable, OM-62-USB-CABLE,

*

sold separately, see next page.

TXDIN1620

Shown smaller
than actual size.

User Trim:

Raise and lower
buttons, active for
offset when output
is between 3.8 to 6 mA,
span between 18 to 22 mA,
trim lock option

TXDIN1620
Type: 3-wire voltage output with

programmable ranges: 0 to 10, 0 to 5,
2 to 10, 1 to 5, and 0 to 1V

Supply: 15 to 28 Vdc
Response Time: <500 ms to reach

95% of final value; start up time <3 s

Calibration Accuracy: ±5 mV
Output Drive: 2 mA driving 5 kΩ @ 10V
Protection: Reverse connection and

over-voltage protection, max over voltage
current 100 mA
User Trim: Raise and lower buttons,
active for offset when output is at offset
and span, trim lock option

TXDIN1630
Type: Dual form C relay contacts
Supply: 24 Vdc ± 5% @ 40 mA max
Response Time: <500 ms to reach

95% of final value; start up time <3 s
Contact Rating: 250 Vac rms @ 1 A;
30 Vdc @ 1 A resistive load
Trip Type: Individual trips A and B may
be set at high or low level, full range
setpoint plus adjustable
Ranges: Setpoint programmed on units,
covering full range of input

Hysteresis: Set in units
Protection: Reverse connection and

over-voltage protection, max over voltage
current 100 mA

TXDIN1610

TXDIN1630

Inputs
Input Range Accuracy*

-200 to 1370°C

(-328 to 2498°F)

-100 to 1200°C
(-148 to 2192°F)

0.1% of FSR ±0.5°C (±0.9°F)

-100 to 1000°C [Type T 0.2% FSR ±0.5°C
(-148 to 1832°F) (±0.9°F)]

-180 to 1300°C
(-292 to 2372°F)

-100 to 400°C
(-148 to 752°F)

-10 to 1760°C
(14 to 3200°F)

±0.5°C (±0.9°F) ±0.1% of FSR**

-10 to 1760°C
(14 to 3200°F)

(-328 to 1562°F)

Accuracy for Pt100 and thermocouple do not include sensor and cold junction errors.

*

Only over the range 800 to 1600°C (1472 to 2912°F).

**

-200 to 850°C

Pt100

mV -40 to 75 mV

mA -10 to 25 mA

±0.1°C (±0.9°F)/±0.05% of rdg

±0.04 mV

±0.008 mA

N

To Order (Visit omega.com/txdin1600_series for Pricing and Details)

Model No. Description

TXDIN1610 Universal DIN rail transmitter

TXDIN1620 Universal DIN rail transmitter with 3-wire isolated voltage output
TXDIN1630 Universal DIN rail trip amplifier
OM-62-USB-CABLE USB cable for software

Comes complete with operator’s manual.
Ordering Example: TXDIN1610, universal DIN rail transmitter.

N-24