Omega Products TL-WELD User Manual

Thermocouple and Fine Wire Welder

Make Quality Beaded Thermocouples

TL-WELD

U Wire-Holding Pliers

and Lead

U Safety Glasses
U Magnifying Eyeglass
U Carbon Electrodes
U Spare 2 A Fuse
U Argon Hose
U Power Cord
U Footswitch for Greater

Ease of Use

The TL-WELD is designed for
sensor manufacturers who produce
commercial-grade thermocouple
junctions, and for users of large
numbers of exposed junction
thermocouples, such as test and
development laboratories where
multipoint temperature sensing of
test pieces is required.

No special skills are needed and
most people will be capable of
producing quality work with minimal
practice. The instrument can be
operated via the front panel or by
using the footswitch.

This model is suitable for welding
wires up to 1.1 mm (0.043") in
diameter and has an argon gas
shield facility.

A satisfactory thermocouple
junction is produced without using
argon, but where argon is available
a momentary purge is automatically
triggered immediately prior to the
weld to give optimum weld integrity.

Specifications

General

Energy Output: 0 to 60 joules
Welding Capacity: Wires up to

1.1 mm (0.043") in diameter
Duty Cycle: Minimum 5 to

10 welds/minute

Mechanical

Dimensions:

220 W x 120 H x 250 mm D
(8.7 x 4.7 x 9.9")

Weight: 4 kg (8.8 lb)

Please see
omega.com for
thermocouple
bare wire.

Beaded Thermocouples Only

Electrical

Power Supply:

Standard: 110 to 120 Vac
Optional: 220 to 250 Vac,
50 to 60 Hz

Power Consumption:
Max 170 VA dropping to
20 VA during charging

To Order Vist omega.com/tl_weld for Pricing and Details

Model No. Description

TL-WELD Thermocouple and fine wire welder

Accessory
Model No. Description

TL-WELD-CAR Replacement carbon electrodes (package of 5)

TL-WELD-PL Pliers for TL-WELD

For 220 Vac, add suffix “-220V” no extra charge.
Ordering Example: TL-WELD, 120 Vac powered welder and TL-WELD-CAR, spare

carbon electrodes.

TL-WELD.

TL-WELD-PL

shown smaller

than actual size.

H

H-10