Omega Products TJFT72 User Manual
A-85
Penetration and machine threadedtip probes with new Tee-style
304 stainless steel handle are ideal
for industry use or frozen food
applications. The probe’s 304SS
thick wall tube ensures strong
and rigid performance. Each
probe comes with 305 mm (1') of
RSC cable that stretches to 1.5 m
(5') and a male miniature connector.
The probe features a 6.4 mm (0.25")
dia., with a 250 mm (10") immersion
length from the tip to handle. The
handle is 75 mm (3") in length.
Maximum temp rating: 480°C
(900°F) for type K, 425°C (800°F)
for type E.
Model 88312 features a threaded tip.
Miniature Connector
250 mm (10")
88312(*)
$
85
Threaded Tip
*Specify calibration:
K or E
Shown
smaller than
actual size.
Covered by U.S. and International patents and pending applications.
“Tee-Style” Penetration Probe
Heavy Duty Penetration Probe
1
⁄4-20 threads
This new “T-bar construction” style probe is made
from 304SS to insure long term performance.
Possible uses include the frozen food industry, or any
industrial application where penetration is needed.
Standard RSC coiled cable stretches to 1.5 m (5').
The sensing element is 1⁄4" O.D. and 203 mm (8")
long. Temperature range is from sub-zero to 425°C
(800°F) for type E, to 480°C (900°F) for type K.
*
Specify thermocouple type: J,K,T,E.
88313
$
80
Specialty Thermocouple Probes
88311(*)
$
85
Penetration Tip
*Specify calibration:
K or E
Fine Tip TJ Probe
TJFT72
$
42
Fine tip transition joint thermocouple, 150 mm (6")
long, with 304 SS sheath, 1⁄16" OD. Supplied with 1.8 m (6')
PFA insulated wire with SMPW subminiature male connector.
Tip has a 0.5 mm (0.020") diameter sensing mass.
* Specify calibration: J, K, T or E
** Specify sheath: SS (for 304 Stainless
steel) or IN (for Inconel 600)
Consult sales for 316 SS sheath
Ordering Example: TJFT72-K-SS-116G-6SMPW-M, type K, 304 SS sheath, $42.
All products shown smaller than actual size.
3.2 mm to 2.4 mm
(0.13 to 0.09")
Miniature Connector
Grounded Junction
Grounded Junction
See Section I
See Section I
See Section I
A-86
This probe
features a low-profile
hypodermic tip and
convenient handle for
short depth penetration of
soft materials such as rubber. A
grounded junction, 300 mm (1') of
retractable cable [which stretches to
1.5 m (5)] and a subminiature male
connector are standard. The handle
is rated to 162°C (325°F).
88310(*)
$
50
*Specify calibration: K or E
Purchase PVC insulated
thermocouples with epoxy
sealed junction tip either
singly or in a pack of five.
Supplied in 4.5 m (15') lengths
†
per sensor with subminiature
male window connector and
24 gage solid polyvinyl rip-cord wire.
Maximum Temp rating of 105°C (221°F).
Stripped leads available at $40/5-pack.
†
Other lengths available, consult Sales Department
TC-PVC-(*)-24-180
$
16
Each
5TC-PVC-(*)-24-180
$
50
pkg of 5
*Specify calibration: J, K, T or E
Epoxy Coated
Tip Thermocouple
Autoclave
Probe
This 1.6 mm (0.063") diameter
304SS probe, with stainless
steel transition junction, is
perfect for the food industry,
steam washdown applications
or general heavy duty use. It
features 3.3 m (11') of 1.6 mm
(0.062") mineral insulated coiled
cable, 1 m (3') of PFA insulated
thermocouple grade wire and a
male subminiature connector.
Low-Profile
Penetration Probe
Shown
smaller than
actual size.
TJ36-(*)-116G-6-ACL
$
92
Grounded Junction
*Specify calibration: J, K, T or E
Coil can be stretched
or compressed by hand
TJ36-(*)-116U-6-ACL
$
92
Ungrounded Junction
6.4 mm
(0.25'') dia.
Molded
miniature
connector.
6.4 mm (0.25")
100 mm
(4")
Miniature
Connector
Miniature
connector
with write-onwindow.
All probes were designed for industrial, laboratory, manufacturing and chemical
research only. They are not intended for medicinal use, or on humans. OMEGA
Engineering, Inc. assumes no responsibility if these products are used for medicinal
purposes, or on humans, or are misused in any way.
Specialty Thermocouple Probes
Shown smaller than actual size
6.4 mm (0.25") dia.
Shown smaller
than actual
size.
A
See Section I
See Section I
See Section I
Loading...