Omega Products STS-2X Installation Manual

STS-2X

Soldering Iron Temperature Tester Module

INSTRUCTION

SHEET

Unpacking

Remove the packing list and verify that all equipment has been
received. If there are any questions about the shipment, please call
OMEGA Customer Service Department at 1-800-622-2378 or
[phone]. We can also be reached on the Internet at
omega.com, e-mail: [e-mail].

Upon receipt of shipment, inspect the container and equipment for
any signs of damage. Take particular note of any evidence of rough
handling in transit. Immediately report any damage to the
shipping agent.

M1298/0411

Shop online at: omega.com e-mail: [e-mail]
For latest product manuals: omegamanual.info

The carrier will not honor any claims unless all shipping material is saved for
their examination. After examining and removing contents, save packing
material and carton in the event reshipment is necessary.

Description

The OMEGA STS-2X Soldering Iron Temperature Tester Module
measures soldering iron tip temperature when used in conjunction
with any OMEGA Type-K thermocouple/thermometer. The unique
OMEGA sensor design makes this low-cost testing method possible.
The STS-2X unit measures the temperature of soldering irons to
427°C (80°F). Rugged construction makes the STS-2X the ideal
choice for use in production areas, maintenance work and field
service applications.

NOTE:

SETUP AND OPERATION

Go through the following steps to set up and operate the STS-2X.
The following procedures describe the steps to take when using the
STS-2X in conjunction with a thermometer. Refer to the operator’s
manual of the meter you are using.

1. Turn on the soldering iron to be tested.

2. Turn on the Type K meter and set the display to show degrees
Fahrenheit or Celsius. Plug the Type K subminiature male connector
of the STS-2X into the mating thermocouple input connector on
the meter.

3. Touch the soldering iron tip to the center of the soldering iron
sensor and wait momentarily for the meter display to show the
temperature of the tip. You are actually measuring the temperature
of the solder on the sensor element being heated up by the
soldering iron.

4. Remove the soldering iron from the sensor.

5. Repeat steps 3 and 4 as many times as necessary.

Specifications

Temperature: 0 to 427°C (32 to 800°F)
Cable Connection: 457 mm (18") long insulated leads
Case: Aluminum
Connector: Type K subminiature male connector

(OMEGA part number SMP-K-M)

Dimensions: 50.8 D x 42.6 mm H (2 x 1.68")

Part No. Description

STS-H Soldering iron sensor with element
STS-RE Replacement element (package of 3)

Accessories

Notes:

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing
certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the
right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from
date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product
warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each
product.

If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be
defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the
purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or
unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of
having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted,
include but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility
for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with
information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY
KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION
OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this
order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the
purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential,
incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR
21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s)
be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes
no responsibility as set forth in our basic WARRANTY/ DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and
hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.

RETURN REQUESTS / INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER
SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the
outside of the return package and on any correspondence.

The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.

FOR WARRANTY

RETURNS, please have the following informa-

tion available BEFORE contacting OMEGA:

1. Purchase Order number under which the product was
PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relative to the
product.

FOR NON-WARRANTY

REPAIRS,

consult OMEGA for cur­rent repair charges. Have the following information avail­able BEFORE contacting OMEGA:

1. Purchase Order number to cover the COST of the repair,

2. Model and serial number of the product, and

3. Repair instructions and/or specific problems relative to

the product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in
technology and engineering.

OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2011 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or

reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

Servicing North America:

U.S.A.: Omega Engineering, Inc., One Omega Drive, P.O. Box 4047

ISO 9001 Certified

Stamford, CT 06907-0047
Toll-Free: 1-800-826-6342 Tel: [phone]
FAX: [phone] e-mail: [e-mail]

Canada: 976 Bergar

Laval (Quebec), H7L 5A1 Canada
Toll-Free: 1-800-826-6342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

For immediate technical or application assistance:

U.S.A. and Sales Service: 1-800-826-6342/1-800-TC-OMEGA

®

Canada: Customer Service: 1-800-622-2378/1-800-622-BEST

®

Engineering Service: 1-800-872-9436/1-800-USA-WHEN

®

Mexico/ En Español: 001 [phone] FAX: [phone]
Latin Ameica [e-mail] e-mail:[e-mail]

OMEGAnet®Online Service Internet e-mail

omega.com [e-mail]

Servicing Europe:

Benelux: Managed by the United Kingdom Office

Toll-Free: 0800 099 3344 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

Czech Frystatska 184
Republic: 733 01 Karviná, Czech Republic

Toll-Free: 0800-1-66342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

France: Managed by the United Kingdom Office

Toll-Free: 0800 466 342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

Germany/ Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Austria Toll-Free: 0800 6397678 TEL: [phone]

FAX: [phone] e-mail: [e-mail]

United OMEGA Engineering Ltd.
Kingdom: One Omega Drive, River Bend Technology Centre, Northbank

ISO 9001

Irlam, Manchester M44 5BD United Kingdom

Certified

Toll-Free: 0800-488-488 TEL: [phone]
FAX: [phone] e-mail: [e-mail]