U Lightweight Thin, Flexible
U Available in 2.5, 5 and
10 W/in
U -56 to 232°C (-70 to 450°F)
Operating Temperature
U Etched Foil and Wire
Wound Design
U Round or Rectangular Shapes
U Available in
115 or 230** Vac
U Optional Pressure Sensitive
Adhesive (PSA)
OMEGALUX® silicone rubber
fiberglass insulated flexible heaters
can improve heat transfer and speed
warm-ups where controlled heating
is required in confined areas. Two
circuit designs are available: etched
foil or wire wound. Heaters with
etched foil designed elements are
available where the length or width
dimension is less than 305 mm
(12"). All other heaters where both
the length and the width dimensions
Round Silicone Rubber Heaters
2
†
SRF Series shown
smaller than actual size.
warm-up and high temperature
exceed 305 mm (12") use the wirewound element design. Effect of
power density: gentle warming is
best done with 2.5 W/in2. A good all
purpose unit is the 5 W/in2. Rapid
are achieved with the 10 W/in2;
however, temperature must be
controlled as the safe maximum
operating temperature limit of
232°C (450°F) may be exceeded.
To Order Visit omega.com/srfr_srfg for Pricing and Details
Diameter Total Wattage for Watt Density Without PSA With PSA
cm (inch) 2.5 W/in
Insert watt density: 2 for 2.5 W/in2, 5 for 5 W/in2 or 10 for 10 W/in2.
*
Most sizes available in 230V. Contact Engineering.
**
† Heaters with pressure sensitive adhesive: max operating temperature is 149°C (300°F).
Ordering Examples: SRFR-3/10, 7.6 cm (3") diameter heater with a watt density of 10 W/in2 and 70 watts of total power.
SRFR-11/10, 28 cm (11") diameter heater with a 10 W/in2, 949 watts.
2
5 W/in
2
10 W/in
2
Model No. Model No.
To Order, Call or Shop Online at omega.com
SM
9
Page 2
CAUTION AND WARNING!
Fire and electrical shock may result if products are
used improperly or installed or used by non-qualified
personnel. See inside back cover for additional warning.
Rectangular Silicone Rubber Heaters
To Order Visit omega.com/srfr_srfg for Pricing and Details
Total Wattage for Watt Density
Width, cm (") Length, cm (") 2.5 W/in2 5 W/in2 10 W/in
Insert watt density: 2 for 2.5 W/in2, 5 for 5 W/in2 or 10 for 10W/in2.
*
Most sizes available in 230V. Consult heater sales and engineering.
**
Ordering Examples: SRFG-208/5-P, 5 x 20 cm (2 x 8") heater with a watt density of 5 W/in2, total rated wattage output of 80 watts,
with optional pressure sensitive adhesive.
SRFG-208/10, 10 W/in2, 160 watts.
Note: Heaters are available in only the watt densities where total wattage is shown. Heaters with pressure sensitive adhesive: max operating
temperature is 149°C (300°F).
Without PSA With PSA
Model No. Model No.
10
To Order, Call or Shop Online at omega.com
SM
Page 3
Rectangular Silicone Rubber Heaters
To Order Visit omega.com/srfr_srfg for Pricing and Details
Total Wattage for Watt Density
Width, cm (") Length, cm (") 2.5 W/in2 5 W/in2 10 W/in
* Insert watt density: 2 for 2.5 W/in2, 5 for 5 W/in2 or 10 for 10W/in2.
** Most sizes available in 230V. Consult heater sales and engineering.
Ordering Example: SRFG-712/5-P,18 x 30 cm (7 x 12") heater with a watt density of 5 W/in2,
optional pressure sensitive adhesive.
Note: Heaters are available in only the watt densities where total wattage is shown. Heaters with pressure sensitive adhesive: max operating
temperature is 149°C (300°F).
Without PSA With PSA
Model No. Model No.
total rated wattage output of 420 watts, with
APPLICATIONS
U Freeze Protection
U Low Temperature Ovens
U Heat Tracing Systems
U Viscosity Control
U Dehumidification of Motors
and Control Devices
12
To Order, Call or Shop Online at omega.com
SPECIFICATIONS
Wattage: 5 to 1440 Watts
Power:115 or 230** Vac
Watt Density:2.5, 5 and 10 W/in
Lead Wire:
305 mm (12") PFA insulated
Thickness:0.030 to 0.070",
except at lead wire exit
Dielectric Strength: 1250 Vac
Maximum Temperature: heaters
without pressure sensitive adhesive,
2
232°C (450°F); heaters with
pressure sensitive adhesive, 149°C
(300°F)
Minimum Temperature:
-56°C (-70°F)
SM
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.