Omega Products SGT-1-175-XY13 User Manual

TRANSDUCER QUALITY STRAIN GAGE

5.83 mm

4.931 mm

SGT-3/350-XY11_13_41_43

9.864 mm

6.897 mm

9.631 mm

7.00 mm

12.33 mm

8.02 mm

12.0 mm

BIAXIAL 90° X-Y “TEE” ROSETTE CAN BE USED TO MEASURE STRAIN IN THE X AND Y DIRECTIONS

OMEGA® offers 0/90° TEE planar rosette patterns, with 2 separate strain gages on one carrier. The gage grids are perpendicular, and are electrically independent. These can

To Order

Visit omega.com/sgt_2-element90 for Pricing and Details

NOM. RESIS TANCE

Shown

actual size

4.9 mm

Leads not shown

Shown

actual size

6.9 mm

Leads not shown

actual size

Leads not shown

actual size

Shown

7 mm

Shown

8.6 mm

Leads not shown

MODEL NO. (Ω) A B C D (Vrms) TERMINATION COMP

SGT-2/350-XY11 350

SGT-2/350-XY13 350

SGT-2/350-XY41 350

SGT-2/350-XY43 350

SGT-3/350-XY11 350

SGT-3/350-XY13 350

SGT-3/350-XY41 350

SGT-3/350-XY43 350

SGT-3/1000-XY11 1000

SGT-3/1000-XY13 1000

SGT-3/1000-XY41 1000

SGT-3/1000-XY43 1000

SGT-4/350-XY11 350

SGT-4/350-XY13 350

SGT-4/350-XY41 350

SGT-4/350-XY43 350

GRID CARRIER

1.6 1.8 4.9 5.8 (0.063) (0.071) (0.193) (0.228)

Small TEE rosette, leads/pads,

electrically independent

3.2 3.6 6.9 9.9 (0.126) (0.142) (0.272) (0.039)

Medium TEE rosette

3.2 3.6 7.0 9.6 (0.126) (0.138) (0.276) (0.378)

Medium TEE rosette,

reduced heat generation

4.0 4.6 8.6 12.3 (0.157) (0.181) (0.339) (0.484)

Large TEE rosette, leads/pads

electrically independent

be used in transducer design for axial strain applications or can be wired separately to measure strain in the X and Y directions.

DIMENSIONS

mm (inch)

†

MAX V* TEMP

5.5 Ribbon Leads ST

7.5 Ribbon Leads AL

350 Ω

5.5 Solder Pads ST

7.5 Solder Pads AL

11 Ribbon Leads ST

16 Ribbon Leads AL

350 Ω

11 Solder Pads ST

16 Solder Pads AL

18 Ribbon Leads ST

25 Ribbon Leads AL

higher resistance,

18 Solder Pads ST

1000 Ω

25 Solder Pads AL

14 Ribbon Leads ST

20 Ribbon Leads AL

350 Ω

14 Solder Pads ST

20 Solder Pads AL

STRAIN GAGES

OMEGA offers 0/90° TEE planar rosette patterns, in a halfbridge with a common lead/solder pad. These would typically be used in transducer design for axial strain applications. Each carrier piece has 2 strain gages, with perpendicular grids. SGT-3H/350-XY** actually has 4 leads/solder pads.

Shown larger than actual size, 12 mm

Leads not shown

DISCOUNT SCHEDULE

1 to 10 pkgs .................. Net

11 to 24 pkgs ..................5%

25 to 49 pkgs .................10%

50 and up and OEM .. Consult Factory

SGT-3H/350-XY11 350

SGT-3H/350-XY13 350

SGT-3H/350-XY41 350

SGT-3H/350-XY43 350

† For dimensions key, visit omega.com/pressure

* **

Note: For strain gage accessories visit omega.com/pressure Ordering Example: SGT-3/350-XY11, 350 Ω nominal resistance, medium

TEE rosette strain gage.

Maximum permitted bridge energizing voltage (Vrms).

XY11, XY13, XY41 or XY43.

2.5 2.5 12.0 4.8 (0.098) (0.098) (0.472) (0.189)

Small 90° TEE rosette,

E-36

Notice that one of the strain gages has 2 leads/solder pads on one side of the grid. If the factory has installed leads, all 4 leads are installed, and one lead will be cut away, as it will not be needed. This design is offered to give variety of options for wire routing.

9 Ribbon Leads ST

12 Ribbon Leads AL

with repositioned

lead/tab

9 Solder Pads ST

350 Ω

12 Solder Pads AL

NOTE

ST = Steel AL = Aluminum

TRANSDUCER QUALITY

SGT-1/175-XY11_13_41_43

3.0 mm

25-CONDUCTORS

LIMBS 0.031 mm

GAPS 0.028 mm

AGL 11 mm

SGT-1/350-XY11_13_41_43

3.4 mm

33-CONDUCTORS

LIMBS 0.029 mm

GAPS 0.025 mm

AGL 15 mm

7.4 mm

5.8 mm

SGT-3BH/350-XY11_13_41_43

SGT-3L/350-XY11_13_41_43

5.19 mm

BOTH SIDES:

LIMBS 0.034 mm

GAPS 0.030 mm

10.0 mm

7.2 mm

STRAIN GAGE

0/90° TEE ROSETTES

D B

† Dimensions Key: GRID

A: Active gage length B: Active gage width

CARRIER C: Matrix length D: Matrix width

OMEGA® offers 0/90° TEE planar rosette patterns, in a half-bridge with a common lead/Solder Pads.

To Order

Visit omega.com/sgt_2-element90 for Pricing and Details

These would typically be used in transducer design for axial strain applications. Each carrier

NOM. RESIS- TANCE

Shown actual

size, 8.3 mm

Leads not shown

Shown actual

size, 8.8 mm

Leads not shown

Shown actual

size, 5.8 mm

Leads not shown

Shown smaller than

actual size, 13 mm

Leads not shown

Shown actual

size, 7.2 mm

Leads not shown

Shown actual

size, 5.7 mm

Leads not shown

DISCOUNT SCHEDULE

1 to 10 pkgs .................. Net

11 to 24 pkgs ..................5%

25 to 49 pkgs .................10%

50 and up and OEM .. Consult Factory

MODEL NO. (Ω) A B C D (Vrms)

SGT-1/175-XY11 175

SGT-1/175-XY13 175

SGT-1/175-XY41 175

SGT-1/175-XY43 175

SGT-1/350-XY11 350

SGT-1/350-XY13 350

SGT-1/350-XY41 350

SGT-1/350-XY43 350

SGT-2H/350-XY11 350

SGT-2H/350-XY13 350

SGT-2H/350-XY41 350

SGT-2H/350-XY43 350

SGT-3BH/350-XY11 350

SGT-3BH/350-XY13 350

SGT-3BH/350-XY41 350

SGT-3BH/350-XY43 350

SGT-3H/1000-XY11 1000

SGT-3H/1000-XY13 1000

SGT-3H/1000-XY41 1000

SGT-3H/1000-XY43 1000

SGT-3L/350-XY11 350

SGT-3L/350-XY13 350

SGT-3L/350-XY41 350

SGT-3L/350-XY43 350

† For dimensions key, visit omega.com/pressure permitted bridge energizing voltage (Vrms).

Note: For strain gage accessories visit omega.com/pressure Ordering Example: SGT-3BH/350-XY41, 350 Ω transducer quality

TEE planar rosette strain gage.

piece has 2 strain gages, with perpendicular grids, and 3 leads/Solder Pads.

DIMENSIONS

mm (inch)

†

GRID CARRIER

1.1 1.7 8.3 3.0 (0.043) (0.067) (0.327) (0.118)

Miniature 90° TEE rosette,

1.5 2.0 8.8 3.4 (0.059) (0.079) (0.346) (0.134)

often used on small column transducers

175 Ω

Miniature 90° TEE rosette,

often used on small column transducers

350 Ω

2.0 2.8 5.8 7.4 (0.079) (0.11) (0.228) (0.291)

Small, general purpose

90° TEE rosette

350 Ω

2.5 3.1 13 4.5 (0.098) (0.122) (0.512) (0.177)

3.2 3.5 7.2 10.0 (0.126) (0.138) (0.283) (0.394)

90° TEE rosette,

often used on

column transducers

350 Ω

Medium 90° TEE rosette,

higher resistance,

reduced heat generation

1000 Ω

2.6 1.8 5.7 5.2 (0.102) (0.071) (0.224) (0.205)

Small 90° TEE rosette,

half-bridge with

a common lead/tab

350 Ω

Maximum

E-37

MAX V* TEMP

TERMINATION

COMP

3 Ribbon Leads ST

5 Ribbon Leads AL

3 Solder Pads ST

5 Solder Pads AL

5.5 Ribbon Leads ST

5 Ribbon Leads AL

5.5 Solder Pads ST

7.5 Solder Pads AL

7.5 Ribbon Leads ST

11 Ribbon Leads AL

7.5 Solder Pads ST

11 Solder Pads AL

9 Ribbon Leads ST

13 Ribbon Leads AL

9 Solder Pads ST

13 Solder Pads AL

18 Ribbon Leads ST

25 Ribbon Leads AL

18 Solder Pads ST

25 Solder Pads AL

7 Ribbon Leads ST

10 Ribbon Leads AL

7 Solder Pads ST

10 Solder Pads AL

NOTE

ST = Steel AL = Aluminum