Page 1
Through JuncTion
Wall MounT
ElEcTrical EnclosurEs
SCE-TJ Series
Visit omega.com/
l 0.063" Carbon or
304 Stainless Steel
l Seams Continuously Welded
and Ground Smooth
l Flange Trough Collar Around
All Sides of Door Opening
l Oil-Resistant Gasket
l Standoffs Provided for Mounting
Optional Sub-Panels
l Doors Open 180º with
Removable Hinges
l Black Mini Quarter Turn Latches
l Latches are Opened or Closed
with a Screwdriver
l Sealing Washers and Hole
Plugs Included
lGround Stud on Door and Body
l Mounting Holes in Back
of Enclosure
l Mounting Feet Included
l Padlocking or Keylocking
Latches, and Tamper-Resistant
Hardware is Available
SCE-L9126ELJ electrical junction enclosure
shown smaller than actual size.
For a
Selection of
Terminal Blocks,
DIN Rails and
Power Suplies,
auto
The SCE-TJ Series is designed to house
electrical controls, instruments and
components used in an indoor or outdoor
environment. They provide a degree of
protection for the equipment inside the
enclosure against ingress of solid foreign
objects (falling dirt); and provide a degree
of protection with respect to the harmful
effects on the equipment due to the ingress
of water (rain, sleet, snow).
SCE-L9126ELJW, electrical junction enclosure with
viewing window shown smaller than actual size.
SPECIFICATIONS
Finish: Ansi-61 gray powder coating
inside and out
Industry Standards (IS2):
For carbon steel
NEMA: Type 4, 12 and Type 13
UL Listed: Type 4 and 12
CSA: Type 4 and 12
IEC: 60529 IP66
N-1
Industry Standards (IS5): For 304
stainless steel
NEMA: Type 4, 4X, 12 and Type 13
UL Listed: Type 4, 4X and 12
CSA: Type 4, 4X and 12
IEC: 60529 IP66
Page 2
E
B
B - 2 (0.06)
DOOR
E
B
B - 2 (0.06)
DOOR
11
(0.44)
(B/2) 54 (2.12)
VEIWING AREA
A - 108 (4.25)
VEIWING AREA
SEE WINDOW NOTES
11
(0.44)
51
(2)
B - 22 (0.88)
OPENING
Dimensions: mm (inch)
11
(0.44)
B
E
B - 2 (0.06)
DOOR
A - 22
(0.88)
OPENING
11
(0.44)
Dimensions are the same for 304 SS models.
To Order Visit omega.com/sce-tj for Pricing and Details
A - 108 (4.25)
VEIWING AREA
LATCH NOTES:
1. One latch centered on the door horizontally
if width is ≤ 356 (14)
2. Two latches located 76 (3) from sides of
door if width is > 356 (14)
3. An additional latch is centered horizontally
if width is > 508 (20)
WINDOW NOTES:
1. Door has a single window when viewing area
width is ≤ 406 (16)
2. Door has two windows if viewing width
would be > 406 (16) for a single window
(B/2) 54 (2.12)
VEIWING AREA
B - 22 (0.88)
OPENING
51
(2)
A - 2 (0.06)
DOOR
SEE WINDOW NOTES
C
C - 16
(0.62)
TO
WINDOW
D
A
ENCLOSURES HEIGHT WIDTH DEPTH SUB-PANELS HEIGHT WIDTH
MODEL NO. A (inch) B (inch) C (inch) MODEL NO. D (inch) E (inch)
SCE-L9126ELJ 9 12 6 SCE-9P12L 8 11
SCE-L9186ELJ 9 18 6 SCE-9P18L 8 17
SCE-L9246ELJ 9 24 6 SCE-9P24L 8 23
SCE-L9306ELJ 9 30 6 SCE-9P30L 8 29
SCE-L9366ELJ 9 36 6 SCE-9P36L 8 35
WINDOW MODELS
SCE-L9126ELJW 9 12 6 SCE-9P12L 8 11
SCE-L9186ELJW 9 18 6 SCE-9P18L 8 17
SCE-L9246ELJW 9 24 6 SCE-9P24L 8 23
SCE-L9306ELJW 9 30 6 SCE-9P30L 8 29
SCE-L9366ELJW 9 36 6 SCE-9P36L 8 35
304 STAINLESS STEEL MODELS
SCE-L9126ELJSS 9 12 6 SCE-9P12L 8 11
SCE-L9186ELJSS 9 18 6 SCE-9P18L 8 17
SCE-L9246ELJSS 9 24 6 SCE-9P24L 8 23
SCE-L9306ELJSS 9 30 6 SCE-9P30L 8 29
SCE-L9366ELJSS 9 36 6 SCE-9P36L 8 35
304 STAINLESS STEEL MODELS WITH WINDOWS
SCE-L9126ELJWSS 9 12 6 SCE-9P12L 8 11
SCE-L9186ELJWSS 9 18 6 SCE-9P18L 8 17
SCE-L9246ELJWSS 9 24 6 SCE-9P24L 8 23
SCE-L9306ELJWSS 9 30 6 SCE-9P30L 8 29
SCE-L9366ELJWSS 9 36 6 SCE-9P36L 8 35
Comes complete with mounting feet, sealing washers, and hole plugs.
Ordering Examples: SCE-L9126ELJ, through junction electrical enclosure, 9 H x 12 W x 6" D, and SCE-9P12L sub-panel for 9 x12" enclosure.
SCE-L9246ELJW, through junction electrical enclosure with viewing window, 9 H x 24 W x 6" D, and SCE-9P24L sub-panel for 9 x 24" enclosure.
N-2
Loading...