Page 1
NEMA 4X 304 StAiNlESS
StEEl SlopE top
ENcloSurES
2 Door FrEE StANDiNg ENcloSurES For
WAShDoWN AND corroSivE ApplicAtioNS
SCE-2DST
Series
l 0.104" Thick 304 Stainless Steel
l Seams Continuously Welded and
Ground Smooth
l Flange Trough Collar Around All
Sides of Door Opening
l 15º Sloping Top
l Removable Center Post
l Heavy-Duty Lifting Eyes Anchor
into Reinforced Top
l Body Stiffeners
l Stainless Steel Concealed
Hinges and Padlocking Handles
l 3-Point Latching Mechanism
l Removable Print Pocket on Main
Door of Disconnect Enclosures
l Provisions for 305 mm (12")
Removable Floor Stands
l Panel Supports
l Oil and Water Resistant Gasket
l Ground Stud on Door and Body
For Use
in Food and
Beverage
Industries
The SCE-2DST Series 304 SS electrical
enclosure and control panel is designed
to house electrical and electronic controls,
instruments and equipment in areas which
may be regularly hosed down or are in very
wet conditions. The 15º slope top on these
enclosures and control panels provide
protection from dust, dirt, oil and strong
jets of water. This indoor/outdoor electrical
control panel is the solution for weatherproof
applications and use in corrosive
environments.
SCE-60EL4812SSST, 304 SS slope top 2 door electrical enclosure
shown much smaller than actual size.
SPECIFICATIONS
Finish:
#4 brushed finish on all exterior
surfaces. Optional panels are powder
coated white.
N-1
Industry Standard IS5:
NEMA Type 4, 4X, 12, and Type 13
UL Listed Type 4, 4X, 12
CSA Type 4, 4X, 12
IEC 60529 IP 66
Page 2
LATCH NOTE:
Omit center latch top and bottom of
door when door width is < 762 (30)
E
LATCH NOTE:
Omit center latch top and bottom of
door when door width is < 762 (30)
MTG. CHANNELS FOR
LIGHT FIXTURES
52
(2.03)
305
(12)
152
(6)
Dimensions: mm (inch)
E
MTG. CHANNELS FOR
LIGHT FIXTURES
152
(6)
305
(12)
52
(2.03)
LATCH NOTE:
Omit center latch top and bottom of
door when door width is < 762 (30)
REMOVABLE
CENTER CHANNEL
86 (3.37)
OPENING
38
(1.50)
(B/2)
A - 76 (3)
OPENING
89
(3.50)
STEEL
27
(1.05)
B
140
(5.50)
92
(3.63)
A - 191
(7.50)
76
(3)
AVAILABLE
DOOR SPACE
(B/2)
167
(6.56)
(B/2)
86 (3.37)
OPENING
44
(1.75)
A
140 (5.50)
STAINLESS
PADLOCKING
HANDLE
41
(1.62)
PROVISIONS FOR
SCE FLOOR STAND KIT
C
C
7 (0.28)
15.0º
A +
(15º tan * C)
D
52
(2.03)
To Order Visit omega.com/sce-2dst for Pricing and Details
HEIGHT WIDTH DEPTH Wt. HEIGHT WIDTH
MODEL NO. A (inch) B (inch) C (inch) kg (lb) MODEL NO. D (inch) E (inch)
SCE-60EL4812SSST 60 48 12 235 (519) SCE-60P48 56 44
SCE-60EL4818SSST 60 48 18 238 (525) SCE-60P48 56 44
SCE-60EL6012SSST 60 60 12 259 (571) SCE-60P60 56 56
SCE-60EL6018SSST 60 60 18 273 (602) SCE-60P60 56 56
SCE-72EL6012SSST 72 60 12 294 (649) SCE-72P60 68 56
SCE-72EL6018SSST 72 60 18 309 (682) SCE-72P60 68 56
SCE-72EL7212SSST 72 72 12 336 (740) SCE-72P72 68 68
SCE-72EL7218SSST 72 72 18 355 (783) SCE-72P72 68 68
SCE-72EL7224SSST 72 72 24 408 (904) SCE-72P72 68 68
ACCESSORIES
MODEL NO. DESCRIPTION
SCE-60P48GALV Galvanized sub-panel for 60 x 48" enclosure
SCE-60P60GALV Galvanized sub-panel for 60 x 60" enclosure
SCE-72P60GALV Galvanized sub-panel for 72 x 60" enclosure
SCE-72P72GALV Galvanized sub-panel for 72 x 72" enclosure
Ordering Example: SCE-60EL4812SSST, 304 stainless steel slope top free standing enclosure 60 x 48 x 12", and SCE-60P48, sub-panel.
SCE-72EL7224SSST, 304 stainless steel slope top wall mount enclosure 72 x 72 x 24", SCE-72P72GALV, galvanized sub-panel.
N-2
Loading...