NEMA 4X 304 StAiNlESS
StEEl SlopE top
ENcloSurES
WAll MouNt ENcloSurES for
WAShdoWN ANd corroSivE ApplicAtioNS
SCE-ELST Series
l 0.075" Thick 304 Stainless Steel
l Seams Continuously Welded
and Ground Smooth
l Flange Trough Collar Around All
Sides of Door Opening
l 15º Sloping Top
l Collar Studs Provided for
Mounting Optional Sub-Panels
l Mounting Holes in Back of the
Enclosure for Wall Mounting
l Mounting Hardware,
Sealing Washers and
Hole Plugs Included
l Stainless Steel
Concealed Hinges
l Removable and
Interchangeable Doors
l Black Quarter Turn Latches
l Latches are Opened or Closed
with a Screwdriver
l Removable Print Pocket
l Oil and Water Resistant Gasket
l Ground Stud on Door and Body
For Use
in Food and
Beverage
Industries
The SCE-ELST Series 304 SS electrical
enclosures are designed to house electrical
and electronic controls, instruments and
equipment in areas which may be regularly
hosed down or are in very wet conditions.
The 15º slope top on these enclosures and
control panels provide protection from
dust, dirt, oil and strong jets of water. This
indoor/outdoor electrical control panel is the
solution for weatherproof applications or for
use in corrosive environments.
SPECIFICATIONS
Finish:
#4 brushed finish on all exterior
surfaces. Optional panels are powder
coated white.
N-1
SCE-16EL1208SSST,
304 SS slope top wall mount
electrical enclosure shown
smaller than actual size.
Industry Standard IS5
NEMA Type 4, 4X, 12 & Type 13
UL Listed Type 4, 4X, 12
CSA Type 4, 4X, 12
IEC 60529 IP 66
B
28
(1.10)
A + (15º tan * C)
SEE
SUB-PANEL
NOTES
15.0
AVAILABLE
DOOR SPACE
SUB-PANEL NOTES:
Dimensions are from the inside of the door
C = 0.32 for flat sub-panels
C - 0.18 for bent sub-panels
LATCH NOTES:
Enclosures < 24.00" in height require
only one latch centered on door.
Enclosures 24.00" and < 40.00"
in height require two latches on door.
Enclosures 40.00" require three latches
on door.
Omit center latch top and bottom of door when
door width is < 30.00"
A
13 (0.50)
DOOR
B
38 (1.50)
DOOR
A
64 (2.50)
OPENING
B
136 (5.37)
B
66 (2.62)
OPENING
B
178 (7)
82
(3.25)
33
(1.30)
82
(3.25)
32 (1.25)
28
(1.10)
A + (15º tan * C)
SEE
SUB-PANEL
NOTES
A
A
C
15.0
SUB-PANEL NOTES:
Dimensions are from the inside of the door
C = 0.32 for flat sub-panels
C - 0.18 for bent sub-panels
28
(1.10)
A + (15º tan * C)
SEE
SUB-PANEL
NOTES
28
(1.10)
A + (15º tan * C)
SEE
SUB-PANEL
NOTES
B
136 (5.37)
AVAILABLE
DOOR SPACE
B
178 (7)
82
(3.25)
28
(1.10)
C
A
15.0
SEE
SUB-PANEL
NOTES
A + (15º tan * C)
38 (1.50)
(A 38 [1.50])
+ (15º tan * C)
To Order Visit omega.com/sce-elst for Pricing and Details
HEIGHT WIDTH DEPTH Wt. SUB-PANEL HEIGHT WIDTH
MODEL NO. A (inch) B (inch) C (inch) kg (lb) MODEL NO. D (inch) E (inch)
SCE-16EL1208SSST 16 12 8 8 (18) SCE-16P12 13 9
SCE-16EL1608SSST 16 16 8 10 (22) SCE-16P16 13 13
SCE-20EL1608SSST 20 16 8 14 (30) SCE-20P16 17 13
D
39
(1.53)
SCE-20EL1612SSST 20 16 12 18 (39) SCE-20P16 17 13
SCE-20EL2008SSST 20 20 8 17 (38) SCE-20P20 17 17
SCE-20EL2012SSST 20 20 12 21 (47) SCE-20P20 17 17
SCE-24EL2008SSST 24 20 8 18 (40) SCE-24P20 21 17
SCE-24EL2012SSST 24 20 12 25 (56) SCE-24P20 21 17
SCE-24EL2408SSST 24 24 8 23 (50) SCE-24P24 21 21
SCE-24EL2412SSST 24 24 12 30 (66) SCE-24P24 21 21
SCE-30EL2408SSST 30 24 8 25 (56) SCE-30P24 27 21
SCE-30EL2412SSST 30 24 12 32 (71) SCE-30P24 27 21
SCE-30EL3008SSST 30 30 8 33 (73) SCE-30P30 27 27
SCE-36EL2408SSST 36 24 8 32 (71) SCE-36P24 33 21
SCE-36EL2412SSST 36 24 12 35 (78) SCE-36P24 33 21
SCE-36EL3008SSST 36 30 8 35 (77) SCE-36P30 33 27
SCE-36EL3012SSST 36 30 12 45 (99) SCE-36P30 33 27
SCE-36EL3016SSST 36 30 16 50 (110) SCE-36P30 33 27
SCE-48EL3616SSST 48 36 16 78 (173) SCE-48P36 45 33
SCE-60EL3616SSST 60 36 16 82 (180) SCE-60P36 57 33
Comes complete with mounting hardware, sealing washers, and hole plugs.
Ordering Examples: SCE-16EL1208SSST, 304 stainless steel slope top wall mount enclosure 16 x 12 x 8", and SCE-16P12, sub-panel.
SCE-24EL2008SSST, 304 stainless steel slope top wall mount enclosure 24 x 20 x 8", and SCE-24P20GALV, galvanized sub-panel.
B
E
Ø11
(0.44)
39
(1.53)
A
13 (0.50)
DOOR
SUB-PANEL NOTES:
Dimensions are from the inside of the door
C = 0.32 for flat sub-panels
C - 0.18 for bent sub-panels
LATCH NOTES:
Enclosures < 24.00" in height require
only one latch centered on door.
Enclosures 24.00" and < 40.00"
in height require two latches on door.
Enclosures 40.00" require three latches
on door.
Omit center latch top and bottom of door when
door width is < 30.00"
64 (2.50)
OPENING
>
–
>
–
A
66 (2.62)
OPENING
32 (1.25)
38 (1.50)
DOOR
B
B
82
(3.25)
B
33
(1.30)
A
Dimensions: mm (inch)
Ø = diameter
N-2