Omega Products SCE-12PB User Manual

Download

Page 1

NEMA TYPE 4

22.5 ANd 30.5 MM PUSHBUTTON ENCLOSURES

SCE-PB Series

l 0.075" Carbon Steel l Continuously Welded Seams l Captivated Cover Screws Thread

Into Sealed Wells

l 4-Way Pushbutton Holes

Accept all Brands of Oil-Tight Pushbuttons, Switches and Pilot Lights

l Immediate Removal of Cover

is Permitted

l Oil-Resistant Gasket

Application

Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

Finish

ANSI-61 gray powder over phosphatized surfaces. IS2 industry

Industry Standards-IS2

NEMA Type 4, 12 and 13 UL Listed Type 4 and 12 CSA Type 4 and 12 IEC 60529 IP 66

Pushbutton Enclosures - Hole Arrangments

SCE-6PB shown smaller than actual size.

SCE-1PB SCE-2PB SCE-3PB SCE-4PB SCE-4SPB SCE-5PB SCE-6PBVL SCE-6PB SCE-8PB SCE-9PB SCE-12PB

N-3

SCE-16PBI 22 mm only

Page 2

A - 12.7 (0.50)

SECTION A-A

OPENING

B - 22 (0.87)

*B - 31.7 (1.25)

OPENING

A + 12.7

(0.50)

A + 7.8

(0.31)

DOOR

SEALED

WELLS

57.2

(2.25)

57.2

(2.25)

B + 7.8 (0.31)

DOOR

7.9

(0.31)

NOTE: *B - 12.7 (0.50) ONE COLUMN OF PUSHBUTTONS

C + 4.3

(17)

ø = diameter Dimensions: mm (inch)

Aø

STANDARD 4-WAY

Hole Size A B C

22 mm 22.5 (0.89) 4.8 (0.19) 34.7 (1.36) 30 mm 30.5 (1.22) 3.2 (0.13) 24.7 (0.97)

To Order Visit omega.com/sce_pb for Pricing and Details

HEIGHT (inch) WIDTH (inch) DEPTH (inch) MODEL NO. DESCRIPTION (A) (B) (C)

SCE-1PB Type 12 30.5 mm pushbutton enclosures 3.50 3.25 2.75 SCE-2PB Type 12 30.5 mm pushbutton enclosures 5.75 3.25 2.75 SCE-3PB Type 12 30.5 mm pushbutton enclosures 8.00 8.00 2.75 SCE-4PB Type 12 30.5 mm pushbutton enclosures 10.25 3.25 2.75 SCE-4SPB Type 12 30.5 mm pushbutton enclosures 7.25 6.25 3.00 SCE-5PB Type 12 30.5 mm pushbutton enclosures 12.50 3.25 2.75 SCE-6PB Type 12 30.5 mm pushbutton enclosures 9.50 6.25 3.00 SCE-6PBVL Type 12 30.5 mm pushbutton enclosures 14.75 3.25 2.75 SCE-8PB Type 12 30.5 mm pushbutton enclosures 20.25 3.25 2.75 SCE-9PB Type 12 30.5 mm pushbutton enclosures 9.50 8.50 3.00 SCE-12PB Type 12 30.5 mm pushbutton enclosures 11.75 8.50 3.00

For 22 mm holes add “I” to model number. Ex: SCE-1PBI, no additional cost. Ordering Examples: SCE-1PB, Type 4, 30.5 mm, pushbutton enclosure, 3.50 H x 3.25 W x 2.75" D. SCE-4PB, Type 4, 30.5 mm pushbutton enclosure, 10.25 H x 3.25 W x 2.75" D.

N-4