Omega Products SCE-122408LP User Manual
NEMA TYPE 4 SiNglE-Door
ENcloSurES
SCE-LP Series
l 0.075" Carbon Steel
l Seams Continuously Welded
and Ground Smooth, No Holes
or Knockouts
l Flange Trough Collar Around
All Sides of Door Opening
l Door Clamps Are Quick and
Easy to Operate
l Concealed Hinge
l Hasp and Staple for Padlocking
l Oil Resistant Gasket
l Collar Studs for Mounting
Optional Panels
l Ground Stud on Door
l Removable Print Pocket
Furnished if Height and Width
of Enclosure is 24" or More
SCE-161206LP shown smaller
than actual size.
Application
Designed to house electrical and electronic
controls, instruments, and components.
For use indoors or outdoors, provides
protection from dust, dirt, oil and water.
Finish
ANSI-61 recoatable gray finish. Optional
panels are powder coated white.
N-21
Industry Standard, IS2
NEMA Type 4, 12 and 13
UL Listed Type 4 and 12
CSA Type 4 and 12
IEC 60529 IP 66
B - 152.4
(6)
B
38.1
(1.50)
A - 49.2 (1.94)
DOOR
36.9
(1.45)
A - 73.9 (2.91)
OPENING
B - 73.9 (2.91)
36.9
(1.45)
B - 93.9
(3.70)
OPENING
B - 30.4 (1.20)
DOOR
A - 100
(3.94)
AVAILABLE
DOOR SPACE
25.4
(1)
C
A
SEE
SUB-PANEL
NOTES
A
B - 152 (6) OR
B - 64 (2.50) WHEN
B ≤ 305 (12
D
E
36.9
(1.45)
14.3
(.56)
36.9
(1.45)
A
SUB-PANEL NOTES:
Dimensions are from the inside of the door
C + 8.1 (.32) for flat sub-panels
C - 4.5 (.18) for bent sub-panels
CLAMPING NOTE:
Enclosures > 610 (24) in height
require a third clamp centered vertically
on door
Dimensions: mm (inch)
SECTION A-A
N-22
Loading...