Omega Products SCE-10086ELJSS User Manual

NEMA TYPE 4X ENviroliNE 304 ANd 316 SS JuNcTioN ENcloSurES

SCE-ELJSS Series

l 0.063" Stainless Steel Type 304 and 316 l Seams Continuously Welded and Ground Smooth l Flange Trough Collar Around All Sides of Door

Opening

l Oil-Resistant Gasket l Standoffs Provided for Mounting

Optional Sub-Panels

l Removable Hinge l Doors Open 180° l Black Mini l Latches Are Opened or Closed with a Screwdriver l Sealing Washers and Hole Plugs Included l Ground Stud on Door and Body l Mounting Feet (Included) l Panels Can Be Special Ordered in Stainless Steel

⁄4 Turn Latches

SCE-1210ELJSS shown

smaller than actual size.

Application

Designed to house electrical controls, instruments and components in areas, which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield is recommended.

Finish

#4 brushed finish on all exterior surfaces. Optional panels are powder coated white.

Industry Standards IS5

NEMA Type 4, 4X, 12 & 13; UL Listed Type 4, 4X &12; CSA Type 12, 4, & 4X; IEC 60529 IP 66

N-63

C + 16.7

(0.66)

A ±0.0 (0.00)

C + 16.7

(0.66)

C + 0.5

(0.02)

A ±0.0 (0.00)

DOOR

A - 17.7 (0.70)

OPENING

B - 17.7 (0.70)

OPENING

A - 30.4 (1.20)

B - 64.5

(2.54)

49.2

(1.94)

8.4

(0.33)

MINI

1/4 TURN

LATCH

AVAILABLE

DOOR SPACE

15.2 (0.60)

8.9 (0.35)

B ±0.0 (0.00)

DOOR

LATCH NOTES:

One latch centered on the door vertically if height is < = 355.6 (14)

Two latches located 76.2 (3) from top and bottom of door if height is > 355.6 (14)

Three latches are required if height is > 508 (20)

C + 16.7

(0.66)

C + 0.5

(0.02)

C + 16.7

(0.66)

C + 0.5

(0.02)

DOOR

A - 17.7 (0.70)

OPENING

B - 17.7 (0.70)

A - 30.4 (1.20)

OPENING

AVAILABLE

DOOR SPACE

B - 64.5

(2.54)

MINI

1/4 TURN

LATCH

49.2

(1.94)

8.4

(0.33)

A - 18

(0.71)

B - 65

(2.56)

6.4

(0.25)

(0.38)

9.5

C + 16.7

(0.66)

C + 0.5

(0.02)

B ±0.0 (0.00)

DOOR

15.2 (0.60)

9.5 (0.38)

LATCH NOTES:

One latch centered on the door vertically if height is < = 355.6 (14)

Two latches located 76.2 (3) from top and bottom of door if height is > 355.6 (14)

Three latches are required if height is > 508 (20)

Dimensions: mm (inch)

8.9 (0.35)

To Order Visit omega.com/sce_eljss for Pricing and Details

ENCLOSURES (inch) SUB-PANEL (inch)

HEIGHT WIDTH DEPTH HEIGHT WIDTH

MODEL NO. (A) (B) (C) MODEL NO. (D) (E) TYPE 4X 304 STAINLESS STEEL ENVIROLINE

SCE-604ELJSS 6.00 4.00 4.00 SCE-6P4J 5.25 3.25 SCE-606ELJSS 6.00 6.00 4.00 SCE-6P6J 5.25 5.25 SCE-806ELJSS 8.00 6.00 4.00 SCE-8P6J 7.25 5.25 SCE-8066ELJSS 8.00 6.00 6.00 SCE-8P6J 7.25 5.25 SCE-1008ELJSS 10.00 8.00 4.00 SCE-10P8J 9.25 7.25 SCE-10086ELJSS 10.00 8.00 6.00 SCE-10P8J 9.25 7.25 SCE-1210ELJSS 12.00 10.00 6.00 SCE-12P10J 11.25 9.25 SCE-12108ELJSS 12.00 10.00 8.00 SCE-12P10J 11.25 9.25 SCE-1212ELJSS 12.00 12.00 6.00 SCE-12P12J 11.25 11.25 SCE-1412ELJSS 14.00 12.00 6.00 SCE-14P12J 13.25 11.25 SCE-14128ELJSS 14.00 12.00 8.00 SCE-14P12J 13.25 11.25 SCE-1614ELJSS 16.00 14.00 6.00 SCE-16P14J 15.25 13.25 SCE-16148ELJSS 16.00 14.00 8.00 SCE-16P14J 15.25 13.25 TYPE 4X 316 STAINLESS STEEL ENVIROLINE SCE-604ELJSS6 6.00 4.00 4.00 SCE-6P4J 5.25 3.25 SCE-606ELJSS6 6.00 6.00 4.00 SCE-6P6J 5.25 5.25 SCE-806ELJSS6 8.00 6.00 4.00 SCE-8P6J 7.25 5.25 SCE-8066ELJSS6 8.00 6.00 6.00 SCE-8P6J 7.25 5.25 SCE-1008ELJSS6 10.00 8.00 4.00 SCE-10P8J 9.25 7.25 SCE-10086ELJSS6 10.00 8.00 6.00 SCE-10P8J 9.25 7.25 SCE-1210ELJSS6 12.00 10.00 6.00 SCE-12P10J 11.25 9.25 SCE-12108ELJSS6 12.00 10.00 8.00 SCE-12P10J 11.25 9.25 SCE-1212ELJSS6 12.00 12.00 6.00 SCE-12P12J 11.25 11.25 SCE-1412ELJSS6 14.00 12.00 6.00 SCE-14P12J 13.25 11.25 SCE-14128ELJSS6 14.00 12.00 8.00 SCE-14P12J 13.25 11.25 SCE-1614ELJSS6 16.00 14.00 6.00 SCE-16P14J 15.25 13.25 SCE-16148ELJSS6 16.00 14.00 8.00 SCE-16P14J 15.25 13.25

Ordering Examples: SCE-604ELJSS, Type 4X 304 stainless steel Enviroline® junction enclosure. SCE-1008ELJSS, Type 4X 304 stainless steel Enviroline junction enclosure, 10 H x 8 W x 4" D, SCE-10P8J, sub-panel.

JUNCTION ENCLOSURES

N-64