Omega Products SA2C-TH-44034-40 User Manual
Self-Adhesive Patch Sensors
SA2F-TH Series
2 conductor, #26 AWG
stranded nickel-plated
copper, PFA insulated
and jacketed wire,
1 m (40") long
standard.
2 conductor, #26 AWG
stranded nickel-plated
copper, PFA insulated
and jacketed wire,
1 m (40") long standard.
50 mm
(2")
15 mm
(0.6")
SA2C-TH-44034-40 shown
smaller than actual size.
SA2F-TH-44033-40
shown smaller than
actual size.
35 mm (1.38")
12 mm
(0.5")
U 2252V, 5 kV or 10 kV 25°C (77°F) Elements
U Operating Range: -30 to 100°C (-22 to 212°F)
U Self Adhesive Foil Backing for
Faster Response Time
U Resistant to a Variety of Chemicals
Custom Lengths,
Insulations, and
Configurations
Available
and Oils
U A Range of Cable Termination
Options Available
U 2 Styles Available for Flat or
Curved Surfaces
These sensors are available in two patch styles,
for either curved or flat surfaces. The integral
thermistor element is mounted flush with the
self-adhesive surface of the patch, which is foil
backed to minimize response times.
To Order Visit omega.com/sa2f-th for Pricing and Details
Interchangeability
Model Number Resistance @ 0 to 70°C Wire Length
SA2F-TH-44033-40 2252V @ 25°C ±0.1°C 1 m (40"), stripped leads
SA2F-TH-44034-40 5000V @ 25°C ±0.1°C 1 m (40"), stripped leads
SA2F-TH-44031-40 10,000V @ 25°C ±0.1°C 1 m (40"), stripped leads
SA2C-TH-44033-40 2252V @ 25°C ±0.1°C 1 m (40"), stripped leads
SA2C-TH-44034-40 5000V @ 25°C ±0.1°C 1 m (40"), stripped leads
SA2C-TH-44031-40 10,000V @ 25°C ±0.1°C 1 m (40"), stripped leads
Notes: For longer cable length, change “-40” with required length (in inches) to end of the model number for an additional cost per foot.
For 1/4" jack plug, add “-PP” to the model number for an additional cost.
Ordering Examples: SA2C-TH-44033-40, thermistor patch sensor for curved surfaces, 2252V at 25°C, 1 m (40") of cable with stripped leads.
SA2F-TH-44031-120-PP, thermistor patch sensor for flat surfaces, 10,000V at 25°C, 3 m (10') of cable with 1/4" jack plug.
A-1
Loading...