Omega Products SA1XL-E-120-SRTC-SB User Manual

The “All-in-One”
Surface Thermocouple

Fiberglass-Insulated

Thermocouple Wire Leads

High or Low Temperatures! Self-Adhesive or Cement-On! Super-Fast Response All the Time!

SA1XL
5-Pack

U Stocked in 1, 2, and 3 m

Convenient

Packages

of 5

SA1XL-K-SRTC with
mini connector,
shown actual size.

Quick Delivery

on Custom Lead

Wire Lengths

(40, 80, and 120")
Lengths

U Custom Lead Lengths

Available

U Available in J, K, T, and

E Calibrations

Bare sensing
element nominal,

0.001" thick.

Optional Stainless

Steel Overbraid for

Extra Protection

U Stripped Leads Standard

(Molded Miniature
Connector with Integral
Strain Relief Optional)

U Easy-to-Install Silicone-

Based, Self-Adhesive
Backing [Rated to

30 AWG fiberglass
lead wire rated to
482°C (900°F).

260°C (500°F)]

U Sensor Rated to 315°C

(600°F) When Used as
a “Cement-On”
(OMEGABOND

®

Air Set
Cements Available—
Place Sensor and
Encapsulate with
OMEGABOND® Air
Set Cement)

OMEGA introduces the next
generation of our surface-mount
fast-response thermocouples. The
SA1XL thermocouple achieves
response times of less than

0.15 seconds. This thermocouple is
constructed using a Polyimide/
fiberglass-junction insulation along
with a fiberglass-insulated lead wire.
The SA1XL can be used as a
self-adhering thermocouple for
temperatures up to 260°C (500°F) or
it can be cemented in place for use
at temperatures up to 315°C (600°F).

AVAILABLE FROM STOCK IN CONVENIENT 5-PACKS!

Specifications

Dimensions:

Patch Length: 25.4 mm (1.0”)
Patch Width: 9.5 mm (0.375”)
Strip Length: 25.4 mm (1.0”) with

12.7 mm (0.5”) bare wire

A-27

OMEGABOND®, see accessory chart or visit
omega.com for additional information.

Response Time

0.300

0.250

0 .200

0.150

e (s) m i T

0.100

0.050

0.000

SA1XL

SA1XL Fine-Diameter ProbeInsulated Wire T/C

Tests show that the SA1XL temperature sensor is
significantly faster than a typical insulated 30 AWG
thermocouple or fine-diameter, metal-sheathed probe.

The self-adhesive mounting strip is ideal for
“targeted” placement of the sensor element. Once
the element is in place, it can be used “as is”,
for applications such as electronic component
temperature monitoring during board fabrication. It
can also be cemented in place using OMEGABOND®
for higher temperatures.

Accessories

Model No. Description

OB-100-16 OMEGABOND® 100 1 lb kit,

fast-setting, 2-part epoxy
(sets in 8 to 12 min.)

OB-200-16 OMEGABOND® 200 1 lb kit, high

temperature, 2-part epoxy

OB-400 OMEGABOND
(one part cement; just mix with water)

OB-700 OMEGABOND

®

400 powder, 8 fluid oz

®

700 powder, 8 fluid oz

(one part cement; just mix with water)

Visit omega.com for additional OMEGABOND® products.

A

Available with Stainless Steel Overbraid!

For applications requiring more durable lead wire, OMEGA’s
SA1XL surface thermocouples are available with Stainless
Steel overbraid. Add suffix “-SB” to the model number
(5-pack) for lengths greater than 1 m (36").

Visit omega.com for pricing.

Ordering Example: SA1XL-K-72-SB.

To Order Visit omega.com/sa1xl for Pricing and Details

Model No. Description

SA1XL-(*)(**) 5-pack, self-adhesive thermocouple, 1 m (40"), stripped ends
SA1XL-(*)-72(**) 5-pack, self-adhesive thermocouple, 2 m (80"), stripped ends
SA1XL-(*)-120(**) 5-pack, self-adhesive thermocouple, 3 m (120"), stripped ends
SA1XL-(*)-SRTC(**) 5-pack, self-adhesive thermocouple, 1 m (40"), molded SMP male
SA1XL-(*)-72-SRTC15(**) 5-pack, self-adhesive thermocouple, 2 m (80"), molded SMP male
SA1XL-(*)-120-SRTC(**) 5-pack, self-adhesive thermocouple, 3 m (120"), molded SMP male

Insert calibration K, J, T or E.

*

For a male straight M8 plug add “M8-S-M” to the model number, for a male straight M12 plug add “M12-S-M” to the model number.
For a male right-angled M8 plug add “M8-R-M” to the model number, for a male right-angled M12 plug add “M12-S-M” to the model number.

Ordering Examples: SA1XL-K-72-SRTC, 5-pack Type K, super-fast, self-adhesive thermocouple, 2 m (80") fiberglass-insulated leads, with a
molded-on miniature connector with strain relief, and OB-400 high-temperature air set cement, 8 fluid oz.

SA1XL-K-72-SRTC-SB, 5-pack Type K, self-adhesive thermocouple, 2 m (80"), with SS overbraid.

Insert “-SB” for stainless steel overbraid, for additional price.

**

A-28