DC POWER SUPPLY
15 TO 480 WATTS WITH BUILT-IN MULTI-METER
S8VS Series
Starts at
$
100
S8VS-06024A, power
supply, 24 Vdc, 2.5 A,
with display, $187.
l Smart Display Simplifies
Troubleshooting of DC Supply
Problems Inside the Control Cabinet
l Built-In Functionality of a
Multimeter on the Power Supply
l Instant Read-Out Of: Output
Voltages, Output Currents, Peak
Hold Currents, Remaining Service
Life of Power Supply
l Ultra-Compact, DIN Rail Mount
l Unique Led Displays for
Diagnostics (60 to 480 W Models)
l Protect Critical Processes Against
Line Power Brownouts
l Constant Output Maintained Even
with a 10% Input Voltage Sag
l Meets SEMI F47 Requirements
l Universal Supply Voltage
(85 to 264 Vac; 50/60 Hz)
Engineers and plant managers searching for
ways to improve equipment uptime and
reduce overall operating costs are finding
smarter components, such as OMEGA’s
S8VS Series switching power supplies with
built-in diagnostic displays, essential to
support their preventive maintenance
programs and shorten troubleshooting inside
the control panel.
The S8VS responds to their needs with a
reliable power supply combined with a
Smart Display™ that provides operators with
at-a-glance status of output voltage, output
current and peak hold current. On display
models, the display and alarm output indicate
the power supply’s remaining service life
signaling time for maintenance or
replacement. The single-phase, single output
AC-to-DC power supplies are available with
display on models ranging from 60 to 480 W.
In addition, the S8VS features overload and
overvoltage protection. For increased safety,
the overload protection function allows the
power supply to shutdown automatically if the
outputs are shorted or if there is excessive
current flow in the output.
All models shown
smaller than actual size.
S8VS-09024A, power supply,
24 Vdc, 3.75 A,with display, $239.
To order, see page M-7.
S8VS-06024, power supply,
24 Vdc, 2.5 A, no display, $124.
M-1
SPECIFICATIONS
15 AND 30 W RATINGS/CHARACTERISTICS
POWER RATINGS 15 W 30 W
ITEM TYPE STANDARD STANDARD
5V Models 72% min 70% min
Efficiency (Typical) 12V Models 74% min 76% min
Voltage
Frequency
*1
*1
Current
Power Factor —
Input Harmonic Current Emissions Conforms to EN61000-3-2
Leakage Current
Inrush Current
Voltage Adjustment Range
Ripple 2.0% (p-p) max (at rated input/output voltage)
Input Variation Influence 0.5% max (at 85 to 264 Vac input, 100% load)
Load Variation Influence
Output (Rated Input Voltage)
Temperature Variation Influence 0.05%/°C max
Startup Time
Hold Time 20 ms min (at rated input/output voltage)
Overload Protection
Overvoltage Protection Yes (a zener diode clamp)
Output Voltage Indication No
Output Current Indication No
Peak-Hold Current Indication No
Maintenance Forecast
Monitor Indication
Additional Maintenance Forecast
Functions Monitor Output
Total Run Time Monitor Indication No
Total Run Time Monitor Output No
Undervoltage Alarm Indication Yes (color: red)
Undervoltage Alarm Output No
Parallel Operation No
Series Operation
Operating Ambient Temperature Refer to the derating curve in engineering data (15 W, 30 W models)
Storage Temperature -25 to 65°C
Operating Ambient Humidity 25 to 85% (storage humidity: 25 to 90%)
Dielectric Strength
Insulation Resistance 100 MΩ min (between all outputs and all inputs/PE terminals) at 500 Vdc
Vibration Resistance 10 to 55 Hz, 0.375 mm single amplitude for 2 h each in X, Y, and Z directions
Shock Resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions
Other Output Indicator Yes (color: green)
EMI
EMS Conforms to EN61204-3 high severity levels
Approved Standards
SEMI F47-0200 (200-Vac input)
Weight 160 g (6 oz) max
Refer to page 7 for notes 1 to 4.
*
24V Models 77% min 80% min
100 to 240 Vac (85 to 264 Vac)
50/60 Hz (47 to 450 Hz)
100V Input 0.45 A max 0.9 A max
200V Input 0.25 A max 0.6 A max
100V Input 0.5 mA max
200V Input 1.0 mA max
100V Input 25 A max (for a cold start at 25°C)
200V Input 50 A max (for a cold start at 25°C)
*2
-10 to 15% (with V. ADJ)
2.0% max (5V), 1.5% max (12V, 24V), (with rated input, 0 to 100% load)
100 ms max 1000 ms max
(at rated input/output voltage) (at rated input/output voltage)
105 to 160% of rated load current, 105 to 160% of rated load current,
automatic reset
*3
voltage drop, intermittent, automatic reset
*4
Yes
No
No
Models with 24V output: possible for up to 2 power supplies
(with external diode) models with 5 or 12V output: not possible
(with no icing or condensation)
3.0 kVac for 1 min (between all inputs and outputs; detection current: 20 mA)
2.0 kVac for 1 min (between all inputs and PE terminals; detection current:
20 mA) 1.0 kVac for 1 min (between all outputs and PE terminals;
detection current: 20 mA)
Conducted
Emissions
Radiated
Emissions
Conforms to EN61204-3 EN55011 Class B and based on FCC Class A
Conforms to EN61204-3 EN55011 Class B
UL: UL508 (Listing; Class 2: Per UL1310), UL60950-1, UL1604
(Class I/Division 2) cUL: CSA C22.2 No.14 (Class 2), No.60950-1, No.213
(Class I/Division 2) EN/VDE: EN50178 (=VDE0160), EN60950-1 (SELV)
(=VDE0805 Teil 1) According to VDE0106/P100, IP20 (except terminal block)
M-2
SPECIFICATIONS
60 AND 90 W RATINGS/CHARACTERISTICS
POWER RATINGS 60 W 90 W
MAINTENANCE TOTAL MAINTENANCE TOTAL
ITEM TYPE STANDARD MONITOR MONITOR STANDARD MONITOR MONITOR
Efficiency (Typical) 78% min 80% min
Voltage
Frequency
Current
*1
*1
100 to 240 Vac (85 to 264 Vac)
50/60 Hz (47 to 450 Hz)
100V input 1.7 A max 2.3 A max
200V input 1.0 A max 1.4 A max
Input Power Factor —
Harmonic Current Emissions Conforms to EN61000-3-2
Leakage Current
Inrush Current
100V input 0.5 mA max
200V input 1.0 mA max
100V input 25 A max (for a cold start at 25°C)
200V input 50 A max (for a cold start at 25°C)
Voltage Adjustment Range*2-10 to 15% (with V. ADJ)
Ripple 2.0% (p-p) max (at rated input/output voltage)
Input Variation Influence 0.5% max (at 85 to 264 Vac input, 100% load)
Output Load Variation Influence
(Rated Input Voltage)
Temperature Variation Influence
1.5% max (with rated input, 0 to 100% load)
0.05%/°C max
Startup Time 1000 ms max (at rated input/output voltage)
Hold Time 20 ms min (at rated input/output voltage)
Overload Protection 105 to 160% of rated load current, voltage drop, intermittent, automatic reset
Overvoltage Protection
Output Voltage Indication
Output Current Indication
*3
Yes
*4
No
*4
No
Peak-Hold Current Indication*4No
Maintenance Forecast
Monitor Indication
Maintenance Forecast
Monitor Output
Additional Total Run Time
Functions Monitor Indication
Total Run Time
Monitor Output
Undervoltage Alarm
Indication
*4
*4
Undervoltage Alarm
Output Terminals
*4
*4
No
No
No
No
No
No
Parallel Operation No
Series Operation Yes for up to 2 power supplies (with external diode)
Operating Ambient Temperature
Refer to the derating curve in engineering data (60, 90, 120, 180, 240, and 480 W
models) (with no icing or condensation)
Storage Temperature -25 to 65°C
Operating Ambient Humidity 25 to 85% (storage humidity: 25 to 90%)
3.0 kVac for 1 min (between all inputs and outputs/ alarm outputs; detection current: 20 mA)
2.0 kVac for 1 min (between all inputs and PE terminals; detection current: 20 mA)
Dielectric Strength
1.0 kVac for 1 min (between all outputs/ alarm outputs and PE terminals;
detection current for standard models: 30 mA, detection current for models with
indication monitor: 20 mA)
Other 500 Vac for 1 min (between all outputs and alarm outputs; detection current: 20 mA)
Insulation Resistance
Vibration Resistance
100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 Vdc
10 to 55 Hz, 0.375 mm single amplitude for 2 h each in X, Y, and Z directions
10 to 150 Hz, 0.35 mm single amplitude (5 G max) for 80 min each in X, Y, and Z directions
Shock Resistance 150 m/s2, 3 times for 2 h each in ±X, ±Y, and ±Z directions
Output Indicator Yes (color: green)
Conducted
Emissions
EMI
Radiated
Emissions
Models with indication monitor: Conforms to EN61204-3 EN55011 Class A and based
on FCC Class A, Conforms to EN61204-3 EN55011 Class B
Conforms to EN61204-3 EN55011 Group 1 Class B and based on FCC Class A
Models with indication monitor: Conforms to EN61204-3 EN55011 Class A,
Conforms to EN61204-3 EN55011 Class B
EN61204-3 EN55011 Group 1 Class B
EMS Conforms to EN61204-3 high severity levels
SEMI F47-0200 (200 Vac input)
Weight 330 g (12 oz) max 490 g (17 oz) max
Refer to page 7 for notes 1 to 9.
*
FORECAST RUN TIME FORECAST RUN TIME
The voltage cannot be adjusted
for the S8VS-09024S
Yes (selectable)
Yes (selectable)
Yes (selectable)
Yes (selectable)
*5
*6
*7
No No
No
No
No
Yes (selectable)
Yes (selectable)
Yes (selectable)
Yes (selectable)
*5
*6
*7
No
Yes (transistor
Yes (selectable)
No No
output), 30 Vdc max,
50 mA max
Yes (selectable)
No
*9
No
Yes (transistor
output), 30 Vdc
max, 50 mA max
Yes
(selectable) (selectable)
Yes (transistor output)
No
,
30 Vdc max, 50 mA max
*9
Standard models:
*9
Standard models: Conforms to
Yes
*8
M-3
*8
110.5 (4.4)
10.8
(0.43)
34.9
(1.4)
121.3 (4.8)
1
40
(1.6)
10 (0.4)
74
(2.9)
95
(3.7)
Five, M4 terminal screws
with square washers
Rail stopper
4.5
(0.2)
(Sliding:
15 max)
125.3 (4.9)
120.3 (4.7)
34.9
(1.4)
97
(3.8)
11.3
(0.4)
35.4
(1.4)
108.3
(4.3)
1 (0.04)
10
(0.4)
50 (2)
94
(3.7)
100 (3.9)
115
(4.5)
Seven, M4 terminal screws
with square washers
Rail stopper
4.5 (Sliding: 15 max)
Rail stopper
Screwless block [2.5 (0.1) pitches]
35.2
(1.4)
96.4 (3.8)
4 (0.2)
10 (0.4)
70 (2.8)
Rail stopper
Nine, M4 terminal screws with square washers
4.5 (0.2)
(Sliding: 15 max)
Rail stopper
93
(3.7)
115
(4.5)
150 (5.9)
Screwless block [2.5 (0.1) pitches]
94
(3.7)
115
(4.5)
50
(2)
Five, M4 terminal screws
with square washers
Rail stopper
Screwless block (2.5 pitches)
4.5 (0.17)
(Sliding: 15 max)
10 (0.4)
123.8 (4.9)
127.2 (5.0)
34.9
(1.4)
115
(4.5)
94
(3.7)
115
(4.5)
10 (0.4)
75 (3)
4.5 (0.2)
Rail stopper
Screwless block [2.5 (0.1) pitches]
(Sliding: 15 max)
Seven, M4 terminal screws
with square washers
125.3 (4.9)
120.3 (4.7)
34.9
(1.4)
4.8 (0.2)
(Sliding: 10 max)
(Sliding: 10 max)
22.5
(0.9)
8
(3.3)
Rail stopper
10
(0.4)
Five, M3.5
terminal
screws
with square
washers
4.8 (0.2)
SPECIFICATIONS
60 AND 90 W RATINGS/CHARACTERISTICS (CONTINUED)
POWER RATINGS 60 W 90 W
MAINTENANCE TOTAL MAINTENANCE TOTAL
ITEM TYPE STANDARD MONITOR MONITOR STANDARD MONITOR MONITOR
UL for standard models: UL508 (Listing; Class 2: Per UL1310), UL60950-1
UL for standard models: UL508 (Listing), UL60950-1
UL for models with indication monitor: UL508
UL for standard models S8VS-09024S-@ only: UL508 (Listing, Class 2:
(Listing; Class 2: Per UL1310), UL60950-1 Per UL1310), UL60950-1
cUL for standard models: CSA C22.2 No.107.1
UL for models with indication monitor: UL508 (Listing), UL60950-1
(Class 2: Per CSA C22.2 No. 223)
cUL for standard models: CSA C22.2 No.107.1
Other Approved Standards cUL for models with indication monitor: CSA C22.2
cUL for standard models S8VS-09024S-@ only: CSA C22.2 No.107.1
No. 14 (Class 2) (Class 2: Per CSA C22.2 No. 223)
cUR: CSA No.60950-1
cUL for models with indication monitor: CSA C22.2 No. 14
EN/VDE: EN50178 (= VDE0160), EN60950-1
cUR: CSA No.60950-1
(SELV) (= VDE0805 Teil 1)
Dimensions: mm (in)
EN/VDE: EN50178 (= VDE0160), EN60950-1 (SELV) (= VDE0805 Teil 1)
According to VDE 0106/P100, IP20 (except terminal block)
FORECAST RUN TIME FORECAST RUN TIME
S8VS-06024 (60 W)
S8VS-06024A (60 W)
S8VS-09024 (90 W)/S8VS-12024 (120 W)
S8VS-09024A (90 W)/S8VS-12024A (120 W)
S8VS-48024 (480 W)
S8VS-48024A (480 W)
S8VS-015xx (15 W)
S8VS-030xx (30 W)
S8VS-24024 (240 W)
S8VS-24024A (240 W)
S8VS-18024 (180 W)
S8VS-18024A (180 W)
M-4
SPECIFICATIONS
120 AND 180 W RATINGS/CHARACTERISTICS
POWER RATINGS 120 W 180 W
MAINTENANCE TOTAL MAINTENANCE TOTAL RUN
ITEM TYPE STANDARD MONITOR MONITOR STANDARD MONITOR MONITOR
Efficiency (Typical) 80% min
*1
*1
100 to 240 Vac (85 to 264 Vac)
50/60 Hz (47 to 63 Hz)
100V input 1.9 A max 2.9 A max
200V input 1.1 A max 1.6 A max
100V input 0.5 mA max
200V input 1.0 mA max
100V input 25 A max (for a cold start at 25°C)
*1
200V input 50 A max (for a cold start at 25°C)
Input
Voltage
Frequency
Current
Power Factor 0.95 min
Harmonic Current Emissions Conforms to EN61000-3-2
Leakage Current
Inrush Current
Voltage Adjustment Range*2-10 to 15% (with V.ADJ)
Ripple 2.0% (p-p) max (at rated input/output voltage)
Input Variation Influence 0.5% max (at 85 to 264 Vac input, 100% load)
Output
Load Variation Influence
(Rated Input Voltage)
Temperature Variation Influence
Startup Time
Hold Time
*1
*1
1.5% max (with rated input, 0 to 100% load)
0.05%/°C max
1000 ms max (at rated input/output voltage)
20 ms min (at rated input/output voltage)
Overload Protection 105 to 160% of rated load current, voltage drop, automatic reset
Overvoltage Protection
*3
Yes
Output Voltage Indication*4No Yes (selectable)
Output Current Indication*4No Yes (selectable)
Peak-Hold Current Indication*4No Yes (selectable)
Additional
Functions
Maintenance Forecast Yes Yes
Monitor Indication
*4
Maintenance Forecast
Monitor Output
Total Run Time Yes Yes
Monitor Indication
Total Run Time
*4
*4
Monitor Output
No
No
No (selectable) No (selectable)
No
Undervoltage Alarm Indication*4No Yes (selectable) No Yes (selectable)
Undervoltage Alarm Yes (transistor output), Yes (transistor output),
Output Terminals No 30 Vdc max, 50 mA max
Parallel Operation No
Series Operation Yes for up to 2 power supplies (with external diode)
Operating Refer to the derating curve in engineering data (60, 90, 120, 180, 240, and 480 W
Ambient Temperature models) (with no icing or condensation)
Storage Temperature -25 to 65°C
Operating Ambient Humidity 25 to 85% (Storage humidity: 25 to 90%)
3.0 k Vac for 1 min (between all inputs and outputs/alarm outputs; detection current: 20 mA)
2.0 k Vac for 1 min (between all inputs and PE terminals; detection current: 20 mA)
Dielectric Strength
1.0 k Vac for 1 min (between all outputs/alarm outputs and PE terminals; detection
current for standard models: 30 mA, detection current for models with indication
monitor: 20 mA 500 Vac for 1 min (between all outputs and alarm outputs;
detection current: 20 mA)
Insulation Resistance 100 MΩ min (between all outputs/alarm outputs and all inputs/PE terminals) at 500 Vdc
Vibration Resistance
10 to 55 Hz, 0.375 mm single amplitude for 2 h each in X, Y, and Z directions
0 to 150 Hz, 0.35 mm single amplitude (5 G max) for 80 min each in X, Y, and Z directions
Other Shock Resistance 150 m/s2, 3 times for 2 h each in ±X, ±Y, and ±Z directions
Output Indicator Yes (color: green)
Conducted
Emissions
EMI
Radiated
Emissions
Models with indication monitor: Conforms to EN61204-3 EN55011 Class A,
Conforms to EN61204-3 EN55011 Class B
EN61204-3 EN55011 Group 1 Class B and based on FCC Class A
Models with indication monitor: Conforms to EN61204-3 EN55011 Class A,
Conforms to EN61204-3 EN55011 Class B
EN61204-3 EN55011 Group 1 Class B
EMS Conforms to EN61204-3 high severity levels
UL: UL508 (Listing), UL60950-1; cUL for standard models: CSA C22.2 No. 107.1;
Approved Standards
cUL for models with indication monitor: CSA C22.2 No.14; cUR: CSA No. 60950-1
EN/VDE: EN50178 (= VDE0160), EN60950-1 (SELV) (= VDE0805 Teil 1)
According to VDE0106/P100, IP20 (except terminal block)
SEMI F47-0200 (200 Vac input)
Weight 550 g (19 oz) max 850 g (30 oz) max
Refer to page 7 for notes 1 to 9.
*
FORECAST RUN TIME FORECAST TIME
(selectable)
*5
*6
*7
No No
No Yes (selectable)
No Yes (selectable)
No Yes (selectable)
(selectable)
*5
*6
*7
No
Yes (transistor Yes (transistor
output), 30 Vdc
max, 50 mA max
No No
*8
Yes (transistor
output), 30 Vdc
max, 50 mA max
*8
output), 30 Vdc
max, 50 mA max
No
*8
*8
No 30 Vdc max, 50 mA max
*9
; Standard models: Conforms to
*9
; Standard models: Conforms to
No
Yes (transistor
output), 30 Vdc
max, 50 mA max
M-5
*8
*8
SPECIFICATIONS
240 AND 480 W RATINGS/CHARACTERISTICS
POWER RATINGS 240 W 480 W
MAINTENANCE TOTAL MAINTENANCE TOTAL
ITEM TYPE STANDARD MONITOR MONITOR STANDARD MONITOR MONITOR
Efficiency (Typical) 80% min 83% min
Voltage
Frequency
Current
*1
*1
100 to 240 Vac (85 to 264 Vac)
50/60 Hz (47 to 63 Hz)
100V input 3.8 A max 7.4 A max
200V input 2.0 A max 3.9 A max
Power Factor 0.95 min
Input Harmonic Current Emissions Conforms to EN61000-3-2
Leakage Current
Inrush Current
100V Input 0.5 mA max
200V Input 1.0 mA max
100V Input 25 A max (for a cold start at 25°C)
200V Input 50 A max (for a cold start at 25°C)
Models with indication monitor:
Voltage Adjustment Range*2±10% (with V.ADJ) standard models: -10 to 15% (with V.ADJ)
-10 to 15% (with V.ADJ)
Ripple 2.0% (p-p) max (at rated input/output voltage)
Output Input Variation Influence 0.5% max (at 85 to 264 Vac input, 100% load)
Load Variation Influence
(Rated Input Voltage)
Temperature Variation Influence
1.5% max (with rated input, 0 to 100% load)
0.05%/°C max
Startup Time 1000 ms max (at rated input/output voltage)
Hold Time 20 ms min (at rated input/output voltage)
Overload Protection 105 to 160% of rated load current, voltage drop, automatic reset
Overvoltage Protection
Output Voltage Indication
Output Current Indication
*3
Yes
*4
No Yes (selectable)
*4
No Yes (selectable)
Peak-Hold Current Indication*4No Yes (selectable)
Additional
Functions
Maintenance Forecast
Monitor Indication
*4
Maintenance Forecast
Monitor Output
Total Run Time
Monitor Indication
*4
No Yes (selectable) No Yes (selectable) No
No
No Yes (selectable) No Yes (selectable)
Total Run Time Monitor Output*4No
Undervoltage Alarm Indication*4No Yes (selectable) No Yes (selectable)
Undervoltage Alarm Yes (transistor output), Yes (transistor output),
Output Terminals
No
Parallel Operation No
Series Operation Yes for up to 2 power supplies (with external diode)
Operating Ambient Temperature
Refer to the derating curve in Engineering Data (60, 90, 120, 180, 240,
and 480 W models) (with no icing or condensation)
Storage Temperature -25 to 65°C
Operating Ambient Humidity 25 to 85% (storage humidity: 25 to 90%)
3.0 kVac for 1 min (between all inputs and outputs/alarm outputs; detection current: 20 mA)
2.0 kVac for 1 min (between all inputs and PE terminals; detection current: 20 mA)
Dielectric Strength
1.0 kVac for 1 min (between all outputs/alarm outputs and PE terminals; detection
current for standard 240 and 480 W models: 30 mA, detection current for 240-W
models with indication monitor: 20 mA); 500 Vac for 1 min (between all outputs and
alarm outputs; detection current: 20 mA)
Insulation Resistance
100 MΩ min (between all outputs/alarm outputs and all inputs/PE terminals) at 500 Vdc
10 to 55 Hz, 0.375 mm single amplitude for 2 h each in X, Y, and Z directions
Other
Vibration Resistance
10 to 150 Hz, 0.35 mm single amplitude (5 G max) for 80 min each in X, Y,
and Z directions: 240 W; 10 to 150 Hz, 0.35 mm single amplitude (3 G max.)
for 80 min each in X, Y, and Z directions: 480 W
Shock Resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions
Output Indicator Yes (color: green)
Models with Indication Monitor: Conforms to
EN61204-3 EN55011 Class A and based on
Conducted
Emissions
FCC Class A, Conforms to EN61204-3
EN55011 Class B*9Standard models:
Conforms to EN61204-3 EN55011 Group 1
EMI
Class B and based on FCC Class A
Models with indication monitor:Conforms
to EN61204-3 EN55011 Class A,
Radiated Conforms to EN61204-3 EN55011
Emissions Class B
to EN61204-3 EN55011 Group 1 Class B
and based on FCC Class A
Refer to page 7 for notes 1 to 10.
*
FORECAST RUN TIME FORECAST RUN TIME
*5
*6
*7
No Yes (selectable)
No Yes (selectable)
No Yes (selectable)
Yes (transistor
output), 30 Vdc
max, 50 mA max
No
*8
Yes (transistor Yes (transistor
output), 30 Vdc
max, 50 mA max
30 Vdc max, 50 mA max
No
*8
No
*8
30 Vdc max, 50 mA max
Conforms to EN61204-3 EN55011
Class A and based on FCC Class A
Conforms to EN61204-3 EN55011
*10
Class B
Conforms to EN61204-3
EN55011 Class A Conforms to
*10
Standard models: Conforms
EN61204-3 EN55011 Class B
EMS Conforms to EN61204-3
high severity levels
M-6
*5
*6
*7
output), 30 Vdc
max, 50 mA max
*10
*8
*8
SPECIFICATIONS
240 AND 480 W RATINGS/CHARACTERISTICS (CONTINUED)
POWER RATINGS 240 W 480 W
MAINTENANCE TOTAL MAINTENANCE TOTAL
ITEM TYPE STANDARD MONITOR MONITOR STANDARD MONITOR MONITOR
UL: UL508 (listing), UL60950-1
cUL for 240 W models with indication monitor: CSA C22.2 No.14,
Approved Standards cUL for 240 W standard models and 480 W models: CSA C22.2 No.107.1,
Other
cUR: CSA No. 60950-1, EN/VDE: EN50178 (=VDE0160), EN60950-1 (SELV)
(=VDE0805 Teil 1) According to VDE0106/P100, IP20 (except terminal block)
SEMI F47-0200 (200 Vac input)
Weight 1150 g (41 oz) max 1700 g (60 oz) max
*1. Do not use an inverter output for the power supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal
temperature of the power supply may result in ignition or burning.
*2. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage adjustment range (by more than
+10% for 240 W models with indication monitor).
When adjusting the output voltage, confirm the actual output voltage from the power supply and be sure that the load is not damaged.
*3. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.
*4. Displayed on 7-segment LED. (character height: 8 mm)
*5. Resolution of output voltage indication: 0.1 V, precision of output voltage indication: ±2% (percentage of output voltage value, ±1 digit)
*6. Resolution of output current indication: 0.1 A; precision of output current indication: ±5% F.S. ±1 digit max (specified by rated output voltage)
*7. Resolution of peak-hold current indication: 0.1 A; precision of peak-hold current indication: ±5% F.S. ±1 digit max (specified by rated output
voltage); Signal width required for peak-hold current: 20 ms
*8. A Type and B Type: Sinking, AP Type and BP Type: sourcing
*9. To ensure the emission rating, a ferrite ring core should be used in all cabling (TDK HF60T, HF70RH or equivalent model).
*10. To ensure the emission rating, a ferrite ring core should be used in all cabling (SEIWA E04SR301334 or equivalent model).
FORECAST RUN TIME FORECAST RUN TIME
All models
shown smaller
than actual size.
S8VS-06024A,
power supply,
24 Vdc, 2.5 A,
with display, $187.
To Order (Specify Model Number)
MOST POPULAR MODELS HIGHLIGHTED!
S8VS-09024A,
power supply,
24 Vdc, 3.75 A,
with display, $239.
MODEL NO. PRICE DESCRIPTION
S8VS-01512 $100 Power supply, 12 Vdc, 1.2 A, no display
S8VS-01524 100 Power supply, 24 Vdc, 0.65 A, no display
S8VS-03012 129 Power supply, 12 Vdc, 2.5 A, no display
S8VS-03024 127 Power supply, 24 Vdc, 1.3 A, no display
S8VS-06024 174 Power supply, 24 Vdc, 2.5 A, no display
S8VS-06024A 187 Power supply, 24 Vdc, 2.5 A, with display
S8VS-09024 228 Power supply, 24 Vdc, 3.75 A, no display
S8VS-09024A 239 Power supply, 24 Vdc, 3.75 A, with display
S8VS-12024 275 Power supply, 24 Vdc, 5 A, no display
S8VS-12024A 288 Power supply, 24 Vdc, 5 A, with display
S8VS-18024 368 Power supply, 24 Vdc, 7.5 A, no display
S8VS-06024,
power supply,
24 Vdc, 2.5 A,
no display, $124.
S8VS-18024A 445 Power supply, 24 Vdc, 7.5 A, with display
S8VS-24024 400 Power supply, 24 Vdc, 10 A, no display
S8VS-24024A 540 Power supply, 24 Vdc, 10 A, with display
S8VS-48024 640 Power supply, 24 Vdc, 20 A, no display
S8VS-48024A 855 Power supply, 24 Vdc, 20 A, with display
Ordering Example: S8VS-06024A, power supply with display, 24 Vdc, 2.5 A, DIN rail mount, $187.
M-7
One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | info@omega.com
EPG05
www.omega.com
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488
UNITED STATES
www.omega.com
1-800-TC-OMEGA
Stamford, CT.
CANADA
www.omega.ca
Laval(Quebec)
1-800-TC-OMEGA
GERMANY
www.omega.de
Deckenpfronn, Germany
0800-8266342
Karviná, Czech Republic
FRANCE
www.omega.fr
Guyancourt, France
088-466-342
CZECH REPUBLIC
www.omegaeng.cz
596-311-899
BENELUX
www.omega.nl
Amstelveen, NL
0800-099-33-44
More than 100,000 Products Available!
Temperature
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Pressure, Strain and Force
Displacement Transducers, Dynamic Measurement
Force Sensors, Instrumentation for Pressure and Strain
Measurements, Load Cells, Pressure Gauges, Pressure
Reference Section, Pressure Switches, Pressure Transducers,
Proximity Transducers, Regulators,
Strain Gages, Torque Transducers, Valves
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...