Omega Products RH297 User Manual
Pinless Moisture/Relative
Humidity Meter
With Infrared Thermometer
RH297
U Quick Indication of
Moisture Content
Without Surface
Damage
U Manual Storage Up to
20 Labeled Readings
U Large Easy-To-Read
Backlit Dual Display
with Fast Analog
Bargraph
U Pinless Measurement
Depth to 19 mm (0.75")
Below the Surface
U Dew Point, Vapor
Pressure and
Condensation Point
Measurements
U Pin-Type Probe
Allows for Moisture
Readings at Different
Penetration Levels
U Infrared Design to
Measure Non-Contact
Surface Temperature;
8:1 Distance to Spot
Ratio with 0.95
Fixed Emissivity
U Built-In Humidity/
Temperature Probe
Measures Relative
Humidity, Air
Temperature Plus
Grains Per Pound (GPP)
and Dew Point (DP)
U Programmable High/
Low Moisture/
Humidity Alarms
U Ambient and Surface
Vapor Pressure
U Minimum/Maximum
and Data Hold
U Auto Power Off and Low
Battery Indication
Add wireless communication
with OMEGA® thermal
imaging camera OSXL-T620,
see omega.com/osxl-t620
for details.
RH297 shown smaller
than actual size.
The RH297 pinless moisture
meter incorporates a built-in
infrared thermometer and 20 point
memory. Manually store/recall up
to 20 labeled readings and monitor
moisture in wood and other
building materials with no surface
damage with the pinless moisture
sensor. Remote pin-type probe is
also included which allows
for contact moisture readings
[0.9 m (3') cable length].
The RH297 has an easy-to-read,
large dual display with automatic
backlight feature and fast analog
bargraph. Measure relative
humidity and air temperature with
Hu-1
built-in probe plus non-contact
infrared temperature with built-in
infrared design. Simultaneously
displays moisture value of wood
or material being tested, air
temperature, infrared temperature,
or relative humidity. Advanced
functions provide grains per
pound, dew point, vapor pressure
calculations and programmable
high/low moisture/humidity alarms.
Features automatic calculation of
differential temperature (IR-DP)
to determine condensation point.
The RH297 meter is shipped fully
tested and calibrated, and with
proper use, will provide years of
reliable service.
H
u
Manual data collection is time-consuming
and prone to errors. METERLINK eliminates
this problem by allowing the thermographer
to quickly take moisture readings on a
damaged surface and associate those
readings with the corresponding targets
stored in an infrared image.
Pin-type probe allows for
moisture readings at different
penetration levels.
Collecting moisture readings on damaged
surfaces and associating them with regions
on an infrared image can be a complicated
and cumbersome process.
Specifications
Function Range Accuracy
Pinless Moisture
Pin Moisture Probe
Pinless Depth
RH Measurement
Air Temperature
IR Temperature
-29 to 77°C (-20 to 170°F) ±2.0°C (3.6°F)
-20 to -0.5°C (-4 to 31°F) ±5°C (±9°F)
0.5 to 200°C (33 to 392°F) Greater of ±3.5% or ±5°C (±9°F)
-20 to -1°C (-4 to 30.2°F) ±4.5°C (8.1°F)
1 to 200°C (33.8 to 392°F) Greater of ±3.5% or ±4.5°C (8.1°F)
0 to 99.9 Relative only
0 to 99.9 Relative only
Up to 19 mm (0.75")
0 to 10% ±3% RH
11 to 90% ±2.5% RH
91 to 100% 3% RH
0°C (32°F) 1.1°C (±2°F)
0°C (32°F) ±1°C (1.8°F)
Display: 3-digit primary display, 4-digit secondary display
Vapor Pressure: 0 to 20.0kPA, calculated from temperature
and RH measurements
Dew Point: -30 to 100°C (-22 to 199°F)
Mixing Ratio: 0 to 999 GPP (0 to 160g/kg)
Sample Rate: 2 per second
Backlight: White LED
Memory: 20 point memory
Bluetooth Range: Approximately 10 m (32')
Operating Temperature: 4 to 43°C (40 to 110°F)
Storage Temperature: -30 to 60°C (-14 to 140°F)
Operating Humidity: 90%, 0 to 30°C (32 to 86°F), 75%,
30 to 40°C (86 to 104°F), 45%, 104 to 122°F (40 to 50°C)
Storage Humidity: 90%
Power Supply: 9V battery (included)
Battery Life: 6 to 8 weeks (4 hours/day use),
using alkaline batteries
Auto Power Off (APO): After 30 minutes (nominal) inactivity;
APO function can be disabled by the user
APO Quiescent Current: 50 μA maximum
Dimensions: 165 x 70 x 38 mm (6.5 x 2.8 x 1.5")
Weight: 210 g (7.4 oz)
To Order Visit omega.com/rh297 for Pricing and Details
Model No. Description
RH297
RH297-RP
Comes complete with pin moisture probe with 0.9 m (3') cable, 9V battery, soft pouch case, and operator’s manual.
Ordering Example: RH297, pinless moisture/relative humidity meter with infrared thermometer. OCW-3, OMEGACARESM extends standard
1-year warranty to a total of 4 years.
Pinless moisture/relative humidity meter with infrared thermometer
Replacement pin moisture probe
Hu-2
Loading...