Omega Products RD9906 User Manual



Paperless Recorder

with Standard Ethernet and USB
Communications Interface

RD9900 Series

Starts at

$

2500

⻬ Employing Clear 144 mm

(5.67") TFT Color LCD

⻬ Large Capacity of Data

Memory and Various
Recording Method

⻬ Multi-Points Recording

with High-Speed/
Accuracy

⻬ Easy Operating and

Programming
Without Manuals

⻬ LAN Network Capability
⻬ Safety System

and Reliability

⻬ Analyzing/Data

Acquisition Application
Software

RD9900 Series are network­compatible paperless recorders
with high performance and high
operating function employed high
visibility 5.6" TFT color LCD. High
speed of sampling rate 100 ms for
12 points and high accuracy of
±0.1% were realized, and measured
data is stored into internal memory
and maximum 2 GB compact flash
card. As it can be monitored by a
web browser display on several
computers on intranet or internet,
FTP transfer of data file and e-mail
notification are also available. The
recorder can be used for various
applications such as data
management, research,
development, remote and wide
range monitoring by utilizing internet
environment.

Specifications

Input Specifications

Number of Measuring Points:

RD9906: 6 points
RD9912: 12 points

Input Types: Universal (refer to

the table of inputs for RD200/2800
Accuracy Rating: Refer to the table

of inputs for RD200/RD2800 at

omega.com/rd200_rd2800

RD9912, $3200, shown
smaller than actual size.

Reference Junction Compensation
Accuracy: Type K, E, J, T, N, Platinel II;

±0.5°C or less; R, S, NiMo-Ni, CR­AuFe, WRe5-WRe26, W-Wre, U, L;
±1.0°C or less

Sampling Rate: Approximately 100 ms
for all points

Burnout: Disconnection of input signal
is detected on thermocouple and
resistance thermometer input;
UP/DOWN disable is selectable for
each input

Scaling: Range/scale is selectable
when DC voltage/current is programmed

Digital Filter: Programming FIR filter for
each point (common to all points)

Allowable Signal Source Resistance:

Thermocouple Input (Burnout
Disable)/DC Voltage Input
(±2V or less): 1 kΩ or less
DC Voltage Input (±5 to ±50V):

100 Ω or less
Resistance Thermometer: Per wire
10 Ω or less (same resistance for
3 wires)

Input Resistance: DC voltage,
thermocouple input; approximately
1 MΩ

S-9

Maximum Input Voltage: DC voltage

input (±2V or less)/thermocouple input
(burnout disable), ±10 Vdc

DC Voltage Input (±5 to ±50V): ±60 Vdc
Dielectric Strength Between Channels:

1000 Vac or more between each channel
(high strength semiconductor relay used)

Display Specifications

Display: 144 mm (5.67") TFT color LCD
Display Types:

Measured Data Display: Trend

screen, data screen, bar-graph screen

Historical Trend Display:

Simultaneous display with real-time
trend is available
Information Display: Alarm display,
marker list, file list
Setting Screen: Alarm, computation,
memory, system, maintenance,
communication, etc.

Trend Screen: 12 colors selectable

Display Screen: 5 screens (5 groups)
Display Points: Maximum 44 points/

screen/
Time Axis Direction: Vertical or
horizontal

Line Width: 1/3/5 dot selectable
Scale Display: 4 scales
Tag/Data Display (Show/hide

selectable)



Marker Display

Data Screen: Display screen, 5 screens (5 groups)

Display Points: Maximum 44 points/screen
Display Contents: Measured value, channel/tag, unit,

alarm status

Bargraph Screen: 12 colors selectable

Display Screen: 5 screens (5 groups)
Display Points: Maximum 44 points/screen
Display Direction: Vertical or horizontal
Scale Display: 1 scale

Information Display:

Alarm Display (Alarm activation/released history display)
Marker List

File List (Group data file list display)
LCD Back Light: Auto/manual OFF function
LCD Brightness: 4 levels adjustment

Recording Specifications

Internal Memory: Flash memory, 4 MB capacity
External Memory: CF card, 32 MB to 2 GB capacity;

128 MB CF card is included as standard
Recording Cycle: 100, 200, 500 ms; 1, 2, 3, 5, 10, 15, 20,

30 s; 1, 2, 3, 5, 10, 15, 20, 30, 60 min

Numbers of Logging Files: 250/numbers of used groups
Logging Data: Measured data; file name (group name),

time of day, month and year of recording start, tag,
measured data, alarm status/types

Storing Types: Binary/CSV type
Storing Methods:

Manual Start/Stop: Dedicated key operation

Schedule: Designation for time of day and date

Trigger Signal: Alarm event pre-trigger is selectable
Measuring Numbers of Pre-Trigger: Maximum 950 data
Recording Cycle

be programmed for 100, 200 and 500 ms recording; 5 groups
of 44 points/group for recording with 1s or more (total of
100 points programming possible)

Recording Duration (CF Card): When 6 channels recorded
in sampling mode (real data)

Recording

Cycle* 128 MB 256 MB 512 MB 1 GB 2 GB

0.1 sec 6.32 days 12.6 days 25.3 days 50.6 days 101 days

1 sec 63.2 days 126 days 253 days 1.4 yrs 2.8 yrs

60 sec 10 yrs 21 yrs 42 yrs 83 yrs 166 yrs

When 12 channels recorded in sampling mode (real data)

Recording

Cycle 128 MB 256 MB 512 MB 1 GB 2 GB

0.1 sec 3.16 days 6.32 days 12.6 days 25.3 days

1 sec 31.6 days 63.2 days 126 days 253 yrs 1.4 yrs

60 sec 5.2 yrs 10 yrs 21 yrs 42 yrs 83 yrs

*: Up to 3 groups of 12 points/group can

Computation Specifications

Computation Points: Maximum 44 points
Computation Types:

Arithmetic Operations: Addition, subtraction,

multiplication, division, remainder, exponential

Comparison Operations: Equality, inequality, great, less,

equality/great, equality/less

Logical Operations: AND, OR, XOR, NOT

General Functions: Round-up, round-down, absolute

value, square root, exponent of e, natural logarithm,

common logarithm

Integration Operations: Analog integration,

digital integration

Channel Data Operations: Measured data computation,

calculated data computation

50.6 days

Alarm Specifications

Setups: Up to 4 alarms can be

programmed per channel
Alarm Types: Upper limit, lower limit,

differential higher limit, differential
lower limit (deadband is selectable),
abnormal data

Delay Function: Setup range of alarm delay, 1 to 3600 sec
Alarm Settings: AND/OR selectable

Communication Functions Network

FTP Server: Data file can be read from the network computer
Web Server: Conformed to HTTP1.0; displays the alarm,

information of maintenance by browser software (Internet
Explorer 5.0 or later, Net Scape 6.0 or later, Opera 7 or later)

User’s ID and password registration available
E-Mail: E-Mail notification at specified time for alarm

activation; report data at specified time is selectable from
all registered

USB Communications**

USB: Communication type, USB1.1
Transfer Systems: Bulk transfer, control transfer
Communication Contents: File transfer by virtual drive

connection

General Specifications

Rated Power Voltage: 100 to 240 Vac (universal power

supply); 50/60 Hz
Maximum Power Consumption: 50 VA (DO: all points

ON, 240 Vac)

Reference Operating Condition:

Ambient Temperature/Humidity Range: 21 to 25°C,

45 to 65% RH

Power Voltage: 100 Vac, ±1.0%
Power Frequency: 50/60 Hz ±0.5%
Attitude: Left/right 0°, forward/backward 0°
Warm-Up Time: Longer than 30 minutes

Normal Operating Condition:

Ambient Temperature/Humidity Range: 0 to 50°C,

20 to 80% RH

Power Voltage: 90 to 264 Vac
Power Frequency: 50/60 Hz ±2%
Attitude: Left/right 0°, forward tilting 0°, backward

tilting 0° to 20°

Transportation Condition (At the Packed Condition on
Shipment from Our Factory):

Ambient Temperature/Humidity Range: -20 to 60°C,

5 to 90% RH (note: no dew condensation)

Vibration: 10 to 60 Hz, 0.5 G (4.9 m/S2) or less
Impact: 40 G (392 m/ S2) or less

Storage Condition: Ambient temperature/humidity range

-20 to 60°C, 5 to 90%RH (note: no dew condensation)
Power Failure Protection: Setups and data are backed up

by flash memory

Clock: Lithium battery backs up RAM (minimum 5 years)
Insulation Resistance:

Secondary Terminals and

Protective Conductor Terminals:

20 MΩ or more at 500 Vdc

Primary Terminals and Protective

Conductor Terminals: 20 MΩ or more at 500 Vdc

Primary and Secondary Terminals: 20 MΩ or more at

500 Vdc

Dielectric Strength:

Secondary Terminals and Protective Conductor
Terminals: 1 minute at 500 Vac
Primary Terminals and Protective Conductor
Terminals: 1 minute at 1500 Vac
Primary and Secondary Terminals: 1 minute at 2300 Vac

See page S-11 for additional information.

**

S-10

S